25 research outputs found

    Numerical Simulation for the Internal Flow Analysis of the Linear Compressor with Improved Muffler

    Get PDF
    The numerical simulation is frequently used to estimate experimental results in fluid flow dynamics. In this paper, we focus on increasing the efficiency of linear compressor by applying modified muffler. Furthermore, we analyze a fluid flow in a suction line of linear compressor by using a computational fluid dynamics. We assume an unsteady flow, compressible, and two dimension axis-symmetric condition. In numerical simulation models, all processes of linear compressor, i.e., compression, discharging, expansion and suction, are continuously performed. Numerical simulation results are compared with experimental data to validate an accuracy of simulation. Furthermore, we show that numerical simulation results are well converged according to time. The results present that the mass flow which flows into the cylinder increases when the pressure in the piston is highly maintained during the suction process

    A Parametric Study on the Immunomodulatory Effects of Electroacupuncture in DNP-KLH Immunized Mice

    Get PDF
    This study was conducted to compare the effects of low frequency electroacupuncture (EA) and high frequency EA at acupoint ST36 on the production of IgE and Th1/Th2 cytokines in BALB/c mice that had been immunized with 2,4-dinitrophenylated keyhole limpet protein (DNP-KLH), as well as to investigate the difference in the immunomodulatory effects exerted by EA stimulations at acupoint ST36 and at a non-acupoint (tail). Female BALB/c mice were divided into seven groups: normal (no treatments), IM (immunization only), ST36-PA (IM + plain acupuncture at ST36), ST36-LEA (IM + low frequency (1 Hz) EA at ST36), ST36-HEA (IM + high frequency (120 Hz) EA at ST36), NA-LEA (IM + low frequency (1 Hz) EA at non-acupoint) and NA-HEA (IM + high frequency (120 Hz) EA at non-acupoint). EA stimulation was performed daily for two weeks, and total IgE, DNP-KLH specific IgE, IL-4 and IFN-γ levels were measured at the end of the experiment. The results of this study showed that the IgE and IL-4 levels were significantly suppressed in the ST36-LEA and ST36-HEA groups, but not in the NA-LEA and NA-HEA groups. However, there was little difference in the immunomodulatory effects observed in the ST36-LEA and ST36-HEA groups. Taken together, these results suggest that EA stimulation-induced immunomodulation is not frequency dependent, but that it is acupoint specific

    Pretransplant BKV-IgG serostatus and BKV-specific ELISPOT assays to predict BKV infection after kidney transplantation

    Get PDF
    IntroductionPolyomavirus (BKV) infection can lead to major complications and damage to the graft in kidney transplant recipients (KTRs). We investigated whether pretransplant BK serostatus and BK-specific cell-mediated immunity (CMI) predicts post-transplant BK infection.MethodsA total of 93 donor-recipient pairs who underwent kidney transplantation (KT) and 44 healthy controls were examined. Assessment of donor and recipient BKV serostatus and BKV-CMI in recipients was performed prior to transplantation using BKV-IgG ELISA and BKV-specific IFN-g ELISPOT assays against five BK viral antigens (LT, St, VP1, VP2, and VP3). BK viremia was diagnosed when blood BKV-DNA of 104 copies/mL or more was detected during follow-up periods. ResultsAnti-BKV IgG antibody was detected in 74 (79.6%) of 93 KTRs and in 68 (73.1%) of 93 KT donors. A greater percentage of KTRs who received allograft from donors with high levels of anti-BKV IgG had posttransplant BK viremia (+) than KTRs from donors with low anti-BKV IgG (25.5% [12/47] vs. 4.3% [2/46], respectively; P = 0.007). Pretransplant total BKV-ELISPOT results were lower in BK viremia (+) patients than in patients without viremia (-) 20.5 [range 9.9−63.6] vs. 72.0 [43.2 - 110.8]; P = 0. 027). The sensitivity and specificity of the total BKV-ELISPOT assay (cut-off ≤ 53 spots/3×105 cells) for prediction of posttransplant BK viremia were 71.4 (95% CI: 41.9–91.6) and 54.4 (42.8–65.7), respectively. The combination of high donor BKV-IgG, low recipient BKV-IgG, and low total BKV-ELISPOT results improved specificity to 91.1%.DiscussionOur study highlights the importance of pretransplant BKV-IgG serostatus and BKV-specific CMI in predicting posttransplant BKV infection in KTRs. The combination of high donor BKV-IgG, low recipient BKV-IgG, and low total BKV-ELISPOT results predicted BK viremia after KT. Pretransplant identification of patients at highrisk for BK viremia could enable timely interventions and improve clinical outcomes of KTRs

    Promoting Effects of Hydrothermal Treatment on the Activity and Durability of Pd/CeO2 Catalysts for CO Oxidation

    No full text
    Ceria-supported Pd nanoparticles are known to be efficient catalysts for vehicle exhaust purification, especially diesel oxidation. The exhaust often undergoes harsh conditions, suffering from high temperature up to similar to 750 degrees C. These conditions cause Pd nanoparticles to sinter, losing the catalytic active sites. In addition, carbonate and sulfate species might be formed on the catalyst surface, blocking the active sites with degraded activity. Hydrothermal treatment on Pd/CeO2 affects the catalyst structure, resulting in enhanced catalytic activity and durability for CO oxidation. CO conversion approached 100% at temperatures lower than 150 degrees C even in the presence of propylene or SO2. The high activity for CO conversion changed little for longer reaction times and even for temperature fluctuations up to 850 degrees C. A promoting effect was obtained due to Pd redispersion and surface hydroxyl groups formed after the hydrothermal treatment. The redispersion was confirmed by TEM, EXAFS, XRD, in situ DRIFT, and CO chemisorption, and the suppression of surface-poisoning species was investigated using in situ DRIFT and TPD techniques. Ceria-supported Pd nanoparticles are known to be efficient catalysts for vehicle exhaust purification, especially diesel oxidation. The exhaust often undergoes harsh conditions, suffering from high temperature up to similar to 750 degrees C. These conditions cause Pd nanoparticles to sinter, losing the catalytic active sites. In addition, carbonate and sulfate species might be formed on the catalyst surface, blocking the active sites with degraded activity. Hydrothermal treatment on Pd/CeO2 affects the catalyst structure, resulting in enhanced catalytic activity and durability for CO oxidation. CO conversion approached 100% at temperatures lower than 150 degrees C even in the presence of propylene or SO2. The high activity for CO conversion changed little for longer reaction times and even for temperature fluctuations up to 850 degrees C. A promoting effect was obtained due to Pd redispersion and surface hydroxyl groups formed after the hydrothermal treatment. The redispersion was confirmed by TEM, EXAFS, XRD, in situ DRIFT, and CO chemisorption, and the suppression of surface-poisoning species was investigated using in situ DRIFT and TPD techniques.11Nsciescopu

    The Influence of Grain Size on the Mechanical Damping Behavior of Aluminum

    No full text
    An understanding of the fundamental correlation between grain size and material damping is crucial for the successful development of structural components offering high strength and good mechanical energy absorption. With this regard, we fabricated aluminum sheets with grain sizes ranging from tens of microns down to 60 nm and investigated their tensile properties and mechanical damping behavior. An obvious transition of the damping mechanism was observed at nanoscale grain sizes, and the underlying causes by grain boundaries were interpreted

    Factors associated with severe neurologic complications in patients with either hand-foot-mouth disease or herpangina: A nationwide observational study in South Korea, 2009-2014.

    No full text
    BACKGROUND:In 2009, a nationwide sentinel surveillance for hand-foot-mouth disease (HFMD) and herpangina (HA) with neurologic complications was initiated in South Korea. We used this surveillance system to investigate the clinical characteristics of patients with either HFMD or HA with neurologic complications, with the aim of determining risk factors for severe neurologic complications. METHODS:A retrospective review of medical records was conducted on all cases of HFMD and HA with neurologic complications that were reported in the national system between April 1, 2009 and December 31, 2014. A severe case was defined as having HFMD or HA with encephalitis, polio-like syndrome, or cardiopulmonary failure, and less-severe cases were defined as having HFMD or HA with aseptic meningitis. RESULTS:A total of 138 cases (less-severe: 90/138, 65.2%; severe: 48/138, 24.8%) were included from 28 hospitals; 28 ineligible cases were excluded. Of 48 severe cases, 27 (56.2%) had encephalitis; 14 (29.2%) had polio-like syndrome; and seven (14.6%) had cardiopulmonary syndrome. The median patient age was 36 months (IQR: 18-60) and 63 (45.7%) patients were female. Most patients completely recovered, except for seven cases that were fatal or resulted in long-term symptoms (5.1%, 3 patients with neurologic sequelae and 4 deaths). In a multivariable logistic regression analysis, lethargy (OR = 4.67, 95% CI: 1.37-15.96, P = 0.014), female sex (OR = 3.51, 95% CI: 1.17-10.50, P = 0.025), and enterovirus A71 (OR = 3.55, 95% CI: 1.09-11.57, P = 0.035) were significantly associated with severe neurologic complications in HFMD and HA patients. CONCLUSION:In patients with HFMD and HA, lethargy, female, and enterovirus A71 may predict severe neurologic complications

    Fully Dispersed Rh Ensemble Catalyst To Enhance Low-Temperature Activity

    No full text
    Minimizing the use of precious metal catalysts is important in many applications. Single-atom catalysts (SACs) have received much attention because all of the metal atoms can be used for surface reactions. However, SACs cannot catalyze some important reactions that require ensemble sites. Here, Rh catalysts were prepared by treating 2 wt % Rh/CeO2 hydrothermally at 750 °C for 25 h. Nearly 100% dispersion was obtained, but the surface Rh atoms were not isolated (denoted as ENS). They catalyzed the oxidation of C3H6 or C3H8 at low temperatures, but these oxidations did not occur on the Rh SAC. When the simultaneous oxidation of CO, C3H6, and C3H8 was performed, the T20 (temperature at conversion 20%) for CO oxidation increased significantly from 40 °C for sole CO oxidation to 180 °C on SAC due to the competitive adsorption of hydrocarbons. However, T20 increased much less on ENS, from 60 to 100 °C. ENS exhibited superior activity for low-temperature oxidation. During hydrothermal treatment for 25 h, the Rh size initially increased from 2.3 to 6.7 nm then decreased to 0.9 nm. The surface hydroxyl groups formed on the catalyst surface help detach Rh atoms from Rh clusters, while preventing the reaggregation of dispersed Rh atoms into Rh clusters. This fully dispersed catalyst would have maximum atom-efficiency while catalyzing various surface reactions.11sciescopu
    corecore