Non-contact acoustic radiation force impulse microscopy via photoacoustic detection for probing breast cancer cell mechanics

We demonstrate a novel non-contact method: acoustic radiation force impulse microscopy via photoacoustic detection (PA-ARFI), capable of probing cell mechanics. A 30 MHz lithium niobate ultrasound transducer is utilized for both detection of phatoacoustic signals and generation of acoustic radiation force. To track cell membrane displacements by acoustic radiation force, functionalized single-walled carbon nanotubes are attached to cell membrane. Using the developed microscopy evaluated with agar phantoms, the mechanics of highly- and weakly-metastatic breast cancer cells are quantified. These results clearly show that the PA-ARFI microscopy may serve as a novel tool to probe mechanics of single breast cancer cells. © 2014 Optical Society of America.1

Overhydration measured by bioimpedance analysis and the survival of patients on maintenance hemodialysis: a single-center study

AbstractBackgroundBioimpedance analysis (BIA) helps measuring the constituents of the body noninvasively. Prior studies suggest that BIA-guided fluid assessment helps to predict survival in dialysis patients. We aimed to evaluate the clinical usefulness of BIA for predicting the survival rate of hemodialysis patients in Korea.MethodsWe conducted a single-center retrospective study. All patients were diagnosed with end-stage renal disorder and started maintenance hemodialysis between June 2009 and April 2014. BIA was performed within the 1st week from the start of hemodialysis. The patients were classified into 2 groups based on volume status measured by the body composition monitor (BCM; Fresenius): an overhydrated group [OG; overhydration/extracellular water (OH/ECW) >15%] and a nonoverhydrated group (NOG; OH/ECW ≤15%).ResultsA total of 344 patients met the inclusion criteria. Of these, 252 patients (73.3%) were categorized into the OG and 92 patients (26.7%) into the NOG. Age- and sex-matching patients were selected with a rate of 2:1. Finally, 160 overhydrated patients and 80 nonoverhydrated patients were analyzed. Initial levels of hemoglobin and serum albumin were significantly lower in the OG. During follow-up, 43 patients from the OG and 7 patients from the NOG died (median follow-up duration, 24.0 months). The multivariate-adjusted all-cause mortality was significantly increased in the OG (odds ratio, 2.569; P = 0.033) and older patients (odds ratio, 1.072/y; P < 0.001). No significant difference of all-cause or disease-specific admission rate was observed between the 2 groups.ConclusionThe ratio of OH/ECW volume measured with body composition monitor is related to the overall survival of end-stage renal disorder patients who started maintenance hemodialysis

Proper Activity of Histone H3 Lysine 4 (H3K4) Methyltransferase Is Required for Morphogenesis during Zebrafish Cardiogenesis

While increasing evidence indicates the important function of histone methylation during development, how this process influences cardiac development in vertebrates has not been explored. Here, we elucidate the functions of two histone H3 lysine 4 (H3K4) methylation enzymes, SMYD3 and SETD7, during zebrafish heart morphogenesis using gene expression profiling by whole mount in situ hybridization and antisense morpholino oligonucleotide (MO)-based gene knockdown. We find both smyd3 and setd7 are highly expressed within developing zebrafish heart and knock-down of these genes led to severe defects in cardiac morphogenesis without altering the expressions pattern of heart markers, including cmlc2, vmhc, and amhc. Furthermore, double knock-down by coinjection of smyd3 and setd7 MOs caused the synergistic defects in heart development. As similar to knock-down effect, overexpression of these genes also caused the heart morphogenesis defect in zebrafish. These results indicate that histone modifying enzymes, SMYD3 and SETD7, appear to function synergistically during heart development and their proper functioning is essential for normal heart morphogenesis during development

Antibiofilm and Antivirulence Activities of 6-Gingerol and 6-Shogaol Against Candida albicans Due to Hyphal Inhibition

Candida albicans is an opportunistic pathogen and responsible for candidiasis. C. albicans readily forms biofilms on various biotic and abiotic surfaces, and these biofilms can cause local and systemic infections. C. albicans biofilms are more resistant than its free yeast to antifungal agents and less affected by host immune responses. Transition of yeast cells to hyphal cells is required for biofilm formation and is believed to be a crucial virulence factor. In this study, six components of ginger were investigated for antibiofilm and antivirulence activities against a fluconazole-resistant C. albicans strain. It was found 6-gingerol, 8-gingerol, and 6-shogaol effectively inhibited biofilm formation. In particular, 6-shogaol at 10 μg/ml significantly reduced C. albicans biofilm formation but had no effect on planktonic cell growth. Also, 6-gingerol and 6-shogaol inhibited hyphal growth in embedded colonies and free-living planktonic cells, and prevented cell aggregation. Furthermore, 6-gingerol and 6-shogaol reduced C. albicans virulence in a nematode infection model without causing toxicity at the tested concentrations. Transcriptomic analysis using RNA-seq and qRT-PCR showed 6-gingerol and 6-shogaol induced several transporters (CDR1, CDR2, and RTA3), but repressed the expressions of several hypha/biofilm related genes (ECE1 and HWP1), which supported observed phenotypic changes. These results highlight the antibiofilm and antivirulence activities of the ginger components, 6-gingerol and 6-shogaol, against a drug resistant C. albicans strain

Direct and sustained intracellular delivery of exogenous molecules using acoustic-transfection with high frequency ultrasound

Controlling cell functions for research and therapeutic purposes may open new strategies for the treatment of many diseases. An efficient and safe introduction of membrane impermeable molecules into target cells will provide versatile means to modulate cell fate. We introduce a new transfection technique that utilizes high frequency ultrasound without any contrast agents such as microbubbles, bringing a single-cell level targeting and size-dependent intracellular delivery of macromolecules. The transfection apparatus consists of an ultrasonic transducer with the center frequency of over 150 MHz and an epi-fluorescence microscope, entitled acoustic-transfection system. Acoustic pulses, emitted from an ultrasonic transducer, perturb the lipid bilayer of the cell membrane of a targeted single-cell to induce intracellular delivery of exogenous molecules. Simultaneous live cell imaging using HeLa cells to investigate the intracellular concentration of Ca2+ and propidium iodide (PI) and the delivery of 3 kDa dextran labeled with Alexa 488 were demonstrated. Cytosolic delivery of 3 kDa dextran induced via acoustic-transfection was manifested by diffused fluorescence throughout whole cells. Short-term (6 hr) cell viability test and long-term (40 hr) cell tracking confirmed that the proposed approach has low cell cytotoxicity.1

Highly selective PtCo bimetallic nanoparticles on silica for continuous production of hydrogen from aqueous phase reforming of xylose

Hydrogen (H2) is a promising energy vector for mitigating greenhouse gas emissions. Lignocellulosic biomass waste has been introduced as one of the abundant and carbon-neutral H2 sources. Among those, xylose with its short carbon chain has emerged attractive, where H2 can be catalytically released in an aqueous reactor. In this study, a composite catalyst system consisting of silica (SiO2)-supported platinum (Pt)-cobalt (Co) bimetallic nanoparticles was developed for aqueous phase reforming of xylose conducted at 225 °C and 29.3 bar. The PtCo/SiO2 catalyst showed a significantly higher H2 production rate and selectivity than that of Pt/SiO2, whereas Co/SiO2 shows no activity in H2 production. The highest selectivity for useful liquid byproducts was obtained with PtCo/SiO2. Moreover, CO2 emissions throughout the reaction were reduced compared to those of monometallic Pt/SiO2. The PtCo bimetallic nanocatalyst offers an inexpensive, sustainable, and durable solution with high chemical selectivity for scalable reforming of hard-to-ferment pentose sugars

Customers\u27 perception of the attributes of different formats of menu labeling: a comparison between Korea and the U.S

Background/objectives: This study compared the perception of customers from Korea and the U.S. on the attributes of different formats of menu labeling The specific objectives were 1) to compare the customers\u27 perceived usefulness, ease-of-understanding, clarity, and attractiveness of different formats of menu labeling between Korea and the U.S.; and 2) to compare the customers\u27 use intention to different formats of menu labeling between Korea and the U.S. Subjects/methods: A survey was conducted in Korea and the U.S. The participants were allocated randomly to view 1 of the 7 restaurant menus that varied according to the following types of menu labeling formats: (type 1) kcal format, (type 2) traffic-light format, (type 3) percent daily intake (%DI) format, (type 4) kcal + traffic-light format, (type 5) kcal + %DI format, (type 6) traffic-light + %DI format, and (type 7) kcal + traffic-light + %DI format. A total of 279 Koreans and 347 Americans were entered in the analysis. An independent t-test and 1-way analysis of variance were performed. Results: Koreans rated type 4 format (kcal + traffic light) the highest for usefulness and attractiveness. In contrast, Americans rated type 7 (kcal + traffic light + %DI) the highest for usefulness, ease-of-understanding, attractiveness, and clarity. Significant differences were found in the customers\u27 perceived attributes to menu labeling between Korea and the U.S. Americans perceived higher for all the 4 attributes of menu labeling than Koreans. Conclusions: The study is unique in identifying the differences in the attributes of different formats of menu labeling between Korea and the U.S. Americans rated the most complicated type of menu labeling as the highest perception for the attributes, and showed a higher use intention of menu labeling than Koreans. This study contributes to academia and industry for practicing menu labeling in different countries using different formats

High-quantum yield alloy-typed core/shell CdSeZnS/ZnS quantum dots for bio-applications

Abstract Background Quantum dots (QDs) have been used as fluorophores in various imaging fields owing to their strong fluorescent intensity, high quantum yield (QY), and narrow emission bandwidth. However, the application of QDs to bio-imaging is limited because the QY of QDs decreases substantially during the surface modification step for bio-application. Results In this study, we fabricated alloy-typed core/shell CdSeZnS/ZnS quantum dots (alloy QDs) that showed higher quantum yield and stability during the surface modification for hydrophilization compared with conventional CdSe/CdS/ZnS multilayer quantum dots (MQDs). The structure of the alloy QDs was confirmed using time-of-flight medium-energy ion scattering spectroscopy. The alloy QDs exhibited strong fluorescence and a high QY of 98.0%. After hydrophilic surface modification, the alloy QDs exhibited a QY of 84.7%, which is 1.5 times higher than that of MQDs. The QY was 77.8% after the alloy QDs were conjugated with folic acid (FA). Alloy QDs and MQDs, after conjugation with FA, were successfully used for targeting human KB cells. The alloy QDs exhibited a stronger fluorescence signal than MQD; these signals were retained in the popliteal lymph node area for 24h. Conclusion The alloy QDs maintained a higher QY in hydrophilization for biological applications than MQDs. And also, alloy QDs showed the potential as nanoprobes for highly sensitive bioimaging analysis. Graphical Abstrac