1,498 research outputs found
Estimation of yield and maintenance parameters associated with single cell protein production on C-1 compounds
Call number: LD2668 .T4 1984 L43Master of Scienc
A study on measurements of local ice pressure for ice breaking research vessel “ARAON” at the Amundsen Sea
ABSTRACT:In this study, a local ice pressure prediction has been conducted by using measured data from two ice breaking tests that was conducted for a relatively big ice floe at Amundsen Sea in the Antarctica from January 31 to March 30 2012. The symmetry of load was considered by attaching strain gauges on the same sites inside the shell plating of ship at the port and the starboard sides in the bow thrust room. Using measured strain data, after the ice pressure was converted by the influence coefficient method and the direct method, the two values were found to be similar
Recent development of inorganic nanoparticles for biomedical imaging
Inorganic nanoparticle-based biomedical imaging probes have been studied extensively as a potential alternative to conventional molecular imaging probes. Not only can they provide better imaging performance but they can also offer greater versatility of multimodal, stimuli-responsive, and targeted imaging. However, inorganic nanoparticle-based probes are still far from practical use in clinics due to safety concerns and less-optimized efficiency. In this context, it would be valuable to look over the underlying issues. This outlook highlights the recent advances in the development of inorganic nanoparticle-based probes for MRI, CT, and anti-Stokes shift-based optical imaging. Various issues and possibilities regarding the construction of imaging probes are discussed, and future research directions are suggested.
Reverse Doppler Effect of Sound
We report observation of reverse Doppler effect in a double negative acoustic
metamaterial. The metamaterial exhibited negative phase velocity and positive
group velocity. The dispersion relation is such that the wavelength
corresponding to higher frequency is longer. We observed that the frequency was
down-shifted for the approaching source, and up-shifted when the source
receded
Automatic Internal Stray Light Calibration of AMCW Coaxial Scanning LiDAR Using GMM and PSO
In this paper, an automatic calibration algorithm is proposed to reduce the
depth error caused by internal stray light in amplitude-modulated continuous
wave (AMCW) coaxial scanning light detection and ranging (LiDAR). Assuming that
the internal stray light generated in the process of emitting laser is static,
the amplitude and phase delay of internal stray light are estimated using the
Gaussian mixture model (GMM) and particle swarm optimization (PSO).
Specifically, the pixel positions in a raw signal amplitude map of calibration
checkboard are segmented by GMM with two clusters considering the dark and
bright image pattern. The loss function is then defined as L1-norm of
difference between mean depths of two amplitude-segmented clusters. To avoid
overfitting at a specific distance in PSO process, the calibration check board
is actually measured at multiple distances and the average of corresponding L1
loss functions is chosen as the actual loss. Such loss is minimized by PSO to
find the two optimal target parameters: the amplitude and phase delay of
internal stray light. According to the validation of the proposed algorithm,
the original loss is reduced from tens of centimeters to 3.2 mm when the
measured distances of the calibration checkboard are between 1 m and 4 m. This
accurate calibration performance is also maintained in geometrically complex
measured scene. The proposed internal stray light calibration algorithm in this
paper can be used for any type of AMCW coaxial scanning LiDAR regardless of its
optical characteristics
Highly precise AMCW time-of-flight scanning sensor based on digital-parallel demodulation
In this paper, a novel amplitude-modulated continuous wave (AMCW)
time-of-flight (ToF) scanning sensor based on digital-parallel demodulation is
proposed and demonstrated in the aspect of distance measurement precision.
Since digital-parallel demodulation utilizes a high-amplitude demodulation
signal with zero-offset, the proposed sensor platform can maintain extremely
high demodulation contrast. Meanwhile, as all cross correlated samples are
calculated in parallel and in extremely short integration time, the proposed
sensor platform can utilize a 2D laser scanning structure with a single photo
detector, maintaining a moderate frame rate. This optical structure can
increase the received optical SNR and remove the crosstalk of image pixel
array. Based on these measurement properties, the proposed AMCW ToF scanning
sensor shows highly precise 3D depth measurement performance. In this study,
this precise measurement performance is explained in detail. Additionally, the
actual measurement performance of the proposed sensor platform is
experimentally validated under various conditions
Clinical characteristics of 2009 pandemic influenza A (H1N1) infection in children and the performance of rapid antigen test
PurposeIn autumn 2009, the swine-origin influenza A (H1N1) virus spread throughout South Korea. The aims of this study were to determine the clinical characteristics of children infected by the 2009 H1N1 influenza A virus, and to compare the rapid antigen and real-time polymerase chain reaction (PCR) tests.MethodsWe conducted a retrospective review of patients ≥18 years of age who presented to Soonchunhyang University Hospital in Seoul with respiratory symptoms, including fever, between September 2009 and January 2010. A real-time PCR test was used to definitively diagnose 2009 H1N1 influenza A infection. Medical records of confirmed cases were reviewed for sex, age, and the time of infection. The decision to perform rapid antigen testing was not influenced by clinical conditions, but by individual factors such as economic conditions. Its sensitivity and specificity were evaluated compared to real-time PCR test results.ResultsIn total, 934 patients tested positive for H1N1 by real-time PCR. The highest number of patients (48.9%) was diagnosed in November. Most patients (48.2%) were aged between 6 and 10 years. Compared with the H1N1 real-time PCR test results, the rapid antigen test showed 22% sensitivity and 83% specificity. Seventy-eight patients were hospitalized for H1N1 influenza A virus infection, and fever was the most common symptom (97.4%).ConclusionFor diagnosis of 2009 H1N1 influenza A virus infection, the rapid antigen test was inferior to the real-time PCR test in both sensitivity and specificity. This outcome suggests that the rapid antigen test is inappropriate for screening
Precursor Phenomena of Barium Titanate Single Crystals Grown Using a Solid-State Single Crystal Growth Method Studied with Inelastic Brillouin Light Scattering and Birefringence Measurements
The nature of precursor phenomena in the paraelectric phase of ferroelectrics is one of the
main questions to be resolved from a fundamental point of view. Barium titanate (BaTiO3) is one
of the most representative perovskite-structured ferroelectrics intensively studied until now. The
pretransitional behavior of BaTiO3 single crystal grown using a solid-state crystal growth (SSCG)
method was investigated for the first time and compared to previous results. There is no melting
process in the SSCG method, thus the crystal grown using a SSCG method have inherent higher
levels of impurity and defect concentrations, which is a good candidate for investigating the effect of
crystal quality on the precursor phenomena. The acoustic, dielectric, and piezoelectric properties,
as well as birefringence, of the SSCG-grown BaTiO3 were examined over a wide temperature range.
Especially, the acoustic phonon behavior was investigated in terms of Brillouin spectroscopy, which
is a complementary technique to Raman spectroscopy. The obtained precursor anomalies of the
SSCG-grown BaTiO3 in the cubic phase were similar to those of other single crystals, in particular,
of high-quality single crystal grown by top-seeded solution growth method. These results clearly
indicate that the observed precursor phenomena are common and intrinsic effect irrespective of the
crystal quality
- …