Predicting morphotropic phase boundary locations and transition temperatures in Pb- and Bi-based perovskite solid solutions from crystal chemical data and first-principles calculations

Using data obtained from first-principles calculations, we show that the position of the morphotropic phase boundary (MPB) and transition temperature at MPB in ferroelectric perovskite solutions can be predicted with quantitative accuracy from the properties of the constituent cations. We find that the mole fraction of PbTiO$_3$ at MPB in Pb(B$'$B$''$)O$_3$-PbTiO$_3$, BiBO$_3$-PbTiO$_3$ and Bi(B$'$B$''$)O$_3$-PbTiO$_3$ exhibits a linear dependence on the ionic size (tolerance factor) and the ionic displacements of the B-cations as found by density functional theory calculations. This dependence is due to competition between the local repulsion and A-cation displacement alignment interactions. Inclusion of first-principles displacement data also allows accurate prediction of transiton temperatures at the MPB. The obtained structure-property correlations are used to predict morphotropic phase boundaries and transition temperatures in as yet unsynthesized solid solutions.Comment: Accepted for publication in J. Appl. Phy

The norovirus NS3 protein is a dynamic lipid- and microtubule-associated protein involved in viral RNA replication

Norovirus (NoV) infections are a significant health burden to society, yet the lack of reliable tissue culture systems has hampered the development of appropriate antiviral therapies. Here we show that the NoV NS3 protein, derived from murine NoV (MNV), is intimately associated with the MNV replication complex and the viral replication intermediate double-stranded RNA (dsRNA). We observed that when expressed individually, MNV NS3 and NS3 encoded by human Norwalk virus (NV) induced the formation of distinct vesicle-like structures that did not colocalize with any particular protein markers to cellular organelles but localized to cellular membranes, in particular those with a high cholesterol content. Both proteins also showed some degree of colocalization with the cytoskeleton marker β-tubulin. Although the distribution of MNV and NV NS3s were similar, NV NS3 displayed a higher level of colocalization with the Golgi apparatus and the endoplasmic reticulum (ER). However, we observed that although both proteins colocalized in membranes counterstained with filipin, an indicator of cholesterol content, MNV NS3 displayed a greater association with flotillin and stomatin, proteins known to associate with sphingolipid- and cholesterol-rich microdomains. Utilizing time-lapse epifluorescence microscopy, we observed that the membrane-derived vesicular structures induced by MNV NS3 were highly motile and dynamic in nature, and their movement was dependent on intact microtubules. These results begin to interrogate the functions of NoV proteins during virus replication and highlight the conserved properties of the NoV NS3 proteins among the seven Norovirus genogroups

Neural basis of implicit motor sequence learning : Modulation of cortical power

Implicit sequence learning describes the acquisition of serially ordered movements and sequentially structured cognitive information, that occurs without awareness. Theta, alpha and beta cortical oscillations are present during implicit motor sequence learning, but their role in this process is unclear. The current study addressed this gap in the literature. A total of 50 healthy adults aged between 19 and 37 years participated in the study. Implicit motor sequence learning was examined using the Serial Reaction Time task where participants unknowingly repeat a sequence of finger movements in response to a visual stimulus. Sequence learning was examined by comparing reaction times and oscillatory power between sequence trials and a set of control trials comprising random stimulus presentations. Electroencephalography was recorded as participants completed the task. Analyses of the behavioral data revealed participants learnt the sequence. Analyses of oscillatory activity, using permutation testing, revealed sequence learning was associated with a decrease in theta band (4–7 Hz) power recorded over frontal and central electrode sites. Sequence learning effects were not observed in the alpha (7–12 Hz) or beta bands (12–20 Hz). Even though alpha and beta power modulations have long been associated with executing a motor response, it seems theta power is a correlate of sequence learning in the manual domain. Theta power modulations on the serial reaction time task may reflect disengagement of attentional resources, either promoting or occurring as a consequence of implicit motor sequence learnin

Multiscale modeling and evaluation of urban surface energy balance in the Phoenix metropolitan area

AbstractPhysical mechanisms of incongruency between observations and Weather Research and Forecasting (WRF) Model predictions are examined. Limitations of evaluation are constrained by (i) parameterizations of model physics, (ii) parameterizations of input data, (iii) model resolution, and (iv) flux observation resolution. Observations from a new 22.1-m flux tower situated within a residential neighborhood in Phoenix, Arizona, are utilized to evaluate the ability of the urbanized WRF to resolve finescale surface energy balance (SEB) when using the urban classes derived from the 30-m-resolution National Land Cover Database. Modeled SEB response to a large seasonal variation of net radiation forcing was tested during synoptically quiescent periods of high pressure in winter 2011 and premonsoon summer 2012. Results are presented from simulations employing five nested domains down to 333-m horizontal resolution. A comparative analysis of model cases testing parameterization of physical processes was done using four configurations of urban parameterization for the bulk urban scheme versus three representations with the Urban Canopy Model (UCM) scheme, and also for two types of planetary boundary layer parameterization: the local Mellor–Yamada–Janjić scheme and the nonlocal Yonsei University scheme. Diurnal variation in SEB constituent fluxes is examined in relation to surface-layer stability and modeled diagnostic variables. Improvement is found when adapting UCM for Phoenix with reduced errors in the SEB components. Finer model resolution is seen to have insignificant (&lt;1 standard deviation) influence on mean absolute percent difference of 30-min diurnal mean SEB terms.</jats:p

Flower-inducing technology facilitates speed breeding in cassava

Cassava is a tropical crop that provides daily carbohydrates to more than 800 million people. New cassava cultivars with improved yield, disease resistance, and food quality are critical to end hunger and reduce poverty in the tropics. However, the progress of new cultivar development has been dragged down by difficulties obtaining flowers from desired parental plants to enable designed crosses. Inducing early flowering and increasing seed production are crucial to improving the efficiency of developing farmer-preferred cultivars. In the present study, we used breeding progenitors to evaluate the effectiveness of flower-inducing technology, including photoperiod extension, pruning, and plant growth regulators. Photoperiod extension significantly reduced the time to flowering in all 150 breeding progenitors, especially late-flowering progenitors which were reduced from 6-7 months to 3-4 months. Seed production was increased by using the combination of pruning and plant growth regulators. Combining photoperiod extension with pruning and the PGR 6-benzyladenine (synthetic cytokinin) produced significantly more fruits and seeds than only photoperiod extension and pruning. Another growth regulator, silver thiosulfate, commonly used to block the action of ethylene, did not show a significant effect on fruit or seed production when combined with pruning. The present study validated a protocol for flower induction in cassava breeding programs and discussed factors to consider in implementing the technology. By inducing early flowering and increasing seed production, the protocol helped move one step further for speed breeding in cassava

Influence of the initial chemical conditions on the rational design of silica particles

The influence of the water content in the initial composition on the size of silica particles produced using the Stöber process is well known. We have shown that there are three morphological regimes defined by compositional boundaries. At low water levels (below stoichiometric ratio of water:tetraethoxysilane), very high surface area and aggregated structures are formed; at high water content (>40 wt%) similar structures are also seen. Between these two boundary conditions, discrete particles are formed whose size are dictated by the water content. Within the compositional regime that enables the classical Stöber silica, the structural evolution shows a more rapid attainment of final particle size than the rate of formation of silica supporting the monomer addition hypothesis. The clearer understanding of the role of the initial composition on the output of this synthesis method will be of considerable use for the establishment of reliable reproducible silica production for future industrial adoption

Effect of pruning young branches on fruit and seed set in cassava

Flowering in cassava is closely linked with branching. Early-flowering genotypes branch low and abundantly. Although farmers prefer late flowering genotypes because of their erect plant architecture, their usefulness as progenitors in breeding is limited by their low seed production. In general, the first inflorescence aborts in cassava. Preventing this abortion would result in early production of seeds and make cassava breeding more efficient. The objective of this study was to assess if pruning young branches prevents the abortion of first inflorescences and promotes early fruit and seed set. Four genotypes with early, late, very late, and no flowering habits were grown under an extended photoperiod (EP) or normal dark night conditions (DN). Additional treatments included pruning young branches at the first or second flowering event and spraying (or not) benzyladenine (BA) after pruning. One genotype failed to flower and was not considered further. For the remaining genotypes, EP proved crucial to induce an earlier flowering, which is a pre-requisite for pruning. Total production of seeds in EP plots was 2,971 versus 150 in DN plots. For plants grown under EP, the average number of seeds per plant without pruning was 3.88, whereas those pruned produced 17.60 seeds per plant. Pruning at the first branching event led to higher number of seeds per plant (26.25) than pruning at the second flowering event (8.95). In general, applying BA was beneficial (38.52 and 13.98 seeds/plant with or without spraying it, respectively). The best combination of treatments was different for each genotype. Pruning young branches and applying BA in the first flowering event not only prevented the abortion of inflorescences but also induced the feminization of male flowers into hermaphrodite or female-only flowers. The procedures suggested from this study (combining EP, pruning young branches, and spraying BA), allowed the production of a high number of seeds from erect cassava genotypes in a short period. The implementation of these procedures will improve the breeding efficiency in cassava

Powder Bed Fusion of nickel-based superalloys: A review

Powder Bed Fusion (PBF) techniques constitute a family of Additive Manufacturing (AM) processes, which are characterised by high design flexibility and no tooling requirement. This makes PBF techniques attractive to many modern manufacturing sectors (e.g. aerospace, defence, energy and automotive) where some materials, such as Nickel-based superalloys, cannot be easily processed using conventional subtractive techniques. Nickel-based superalloys are crucial materials in modern engineering and underpin the performance of many advanced mechanical systems. Their physical properties (high mechanical integrity at high temperature) make them difficult to process via traditional techniques. Consequently, manufacture of nickel-based superalloys using PBF platforms has attracted significant attention. To permit a wider application, a deep understanding of their mechanical behaviour and relation to process needs to be achieved. The motivation for this paper is to provide a comprehensive review of the mechanical properties of PBF nickel-based superalloys and how process parameters affect these, and to aid practitioners in identifying the shortcomings and the opportunities in this field. Therefore, this paper aims to review research contributions regarding the microstructure and mechanical properties of nickel-based superalloys, manufactured using the two principle PBF techniques: Laser Powder Bed Fusion (LPBF) and Electron Beam Melting (EBM). The ‘target’ microstructures are introduced alongside the characteristics of those produced by PBF process, followed by an overview of the most used building processes, as well as build quality inspection techniques. A comprehensive evaluation of the mechanical properties, including tensile strength, hardness, shear strength, fatigue resistance, creep resistance and fracture toughness of PBF nickel-based superalloys are analysed. This work concludes with summary tables for data published on these properties serving as a quick reference to scholars. Characteristic process factors influencing functional performance are also discussed and compared throughout for the purpose of identifying research opportunities and directing the research community toward the end goal of achieving part integrity that extends beyond static components only

Scripts of Sexual Desire and Danger in US and Dutch Teen Girl Magazines: A Cross-National Content Analysis

The aim of this comparative quantitative content analysis was to investigate how US and Dutch teen girl magazines cover sexual desire (i.e., sexual wanting, and pleasure) and sexual danger (i.e., sexual risk, and negative physical/health consequences of sex). Relying on the sexual scripts framework and Hofstede’s cultural dimension of masculinity/femininity, we examined (a) how the coverage varied for boys and girls, (b) how it differed between the United States and the Netherlands, and (c) how gender differences varied by country. The sample comprised 627 sex-related feature stories from all 2006–2008 issues of three US (i.e., Seventeen, CosmoGirl! United States edition, and Teen) and three Dutch teen girl magazines (i.e., Fancy, CosmoGirl! Netherlands edition, and Girlz!). Overall, sexual wanting occurred more frequently in the US magazines than in the Dutch magazines. In the US coverage, boys’ sexual wanting received more attention than girls’ sexual wanting, whereas in the Dutch coverage sexual wanting was depicted equally often for boys and girls. The depiction of sexual pleasure did not vary by gender in either country, but was generally more visible in the Dutch magazines than in the US magazines. Sexual risks and the negative consequences of sex were associated with girls more than with boys, and were primarily depicted in the US magazines rather than in the Dutch magazines

Tuning Curvature and Stability of Monoolein Bilayers by Designer Lipid-Like Peptide Surfactants

This study reports the effect of loading four different charged designer lipid-like short anionic and cationic peptide surfactants on the fully hydrated monoolein (MO)-based Pn3m phase (Q224). The studied peptide surfactants comprise seven amino acid residues, namely A6D, DA6, A6K, and KA6. D (aspartic acid) bears two negative charges, K (lysine) bears one positive charge, and A (alanine) constitutes the hydrophobic tail. To elucidate the impact of these peptide surfactants, the ternary MO/peptide/water system has been investigated using small-angle X-ray scattering (SAXS), within a certain range of peptide concentrations (R≤0.2) and temperatures (25 to 70°C). We demonstrate that the bilayer curvature and the stability are modulated by: i) the peptide/lipid molar ratio, ii) the peptide molecular structure (the degree of hydrophobicity, the type of the hydrophilic amino acid, and the headgroup location), and iii) the temperature. The anionic peptide surfactants, A6D and DA6, exhibit the strongest surface activity. At low peptide concentrations (R = 0.01), the Pn3m structure is still preserved, but its lattice increases due to the strong electrostatic repulsion between the negatively charged peptide molecules, which are incorporated into the interface. This means that the anionic peptides have the effect of enlarging the water channels and thus they serve to enhance the accommodation of positively charged water-soluble active molecules in the Pn3m phase. At higher peptide concentration (R = 0.10), the lipid bilayers are destabilized and the structural transition from the Pn3m to the inverted hexagonal phase (H2) is induced. For the cationic peptides, our study illustrates how even minor modifications, such as changing the location of the headgroup (A6K vs. KA6), affects significantly the peptide's effectiveness. Only KA6 displays a propensity to promote the formation of H2, which suggests that KA6 molecules have a higher degree of incorporation in the interface than those of A6K