18,875 research outputs found
The application of thermal analysis to the study of epoxy–clay nanocomposites
This is a copy of the author 's final draft version of an article published in the journal Journal of thermal analysis and calorimetry. The final publication is available at Springer via http://dx.doi.org/10.1007/s10973-016-5278-0The development of polymer layered silicate (PLS) nanocomposites goes back over 20 years now, and yet they still have not achieved their full potential. A principal reason for this is the difficulty of obtaining a truly exfoliated nanostructure. The fabrication procedure for such PLS nanocomposites based upon epoxy resin includes several stages, including dispersion of the clay in the resin, intercalation of the resin into the clay galleries, and finally curing of the nanocomposite system. Many attempts have been made to improve the degree of exfoliation in the final nanostructure by modifying the procedures involved in these fabrication stages, and the usual approach is to examine the nanostructure, by techniques such as small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), as a function of the fabrication procedure. We show here, however, that thermal analytical techniques, and in particular differential scanning calorimetry, can complement the techniques of SAXS and TEM in the search for ways in which to achieve improved degrees of exfoliation in PLS nanocomposites based upon epoxy resin.Peer ReviewedPostprint (author's final draft
Commentary : missing targets on drugs-related deaths, and a Scottish paradox
The 10-year drug strategy for England and Wales was published in February 2008. It dropped drugs-related deaths (DRDs) as a key performance indicator. Scotland retained a necessary strong focus on DRDs. Scotland's DRDs numbered 1006 in 2000–02 and 1009 in 2003–05. The previous Scottish administration's claim that its number of current injectors had decreased substantially between 2000 and 2003 implied, paradoxically, that their DRD rate would have to have increased. Worse was to come: Scotland's DRDs had increased to 876 in 2006 + 2007. We analyse UK's DRDs by sex and age-group to reveal temporal trends (2000–02 versus 2003–05 versus 2006 + 2007) with different public health and epidemiological implications. We also address the above Scottish paradox and assess, by age-group, how consistent Scotland's 876 DRDs in 2006 + 2007 are with Scottish injectors’ DRD rate in 2003–05 of around 1 per 100 injector-years. Public health success in the UK in reducing DRDs at younger ages should not be overshadowed by the late consequence in terms of older-age DRDs of UK's injector epidemics; in the early 1980s in Scotland, and late 1980s in England and Wales. Targets for reducing DRDs should pay heed to UK's injector epidemics
Non-isothermal cure and exfoliation of tri-functional epoxy-clay nanocomposites
The non-isothermal cure kinetics of polymer silicate layered nanocomposites based on a tri-functional epoxy resin has been investigated by differential scanning calorimetry. From an analysis of the kinetics as a function of the clay content, it can be concluded that the non-isothermal cure reaction can be considered to consist of four different processes: the reaction of epoxy groups with the diamine curing agent; an intra-gallery homopolymerisation reaction which occurs concurrently with the epoxy-amine reaction; and two extra-gallery homopolymerisation reactions, catalysed by the onium
ion of the organically modified clay and by the tertiary amines resulting from the epoxy-amine reaction. The final nanostructure displays a similar quality of exfoliation as that observed for the isothermal cure of the same nanocomposite system. This implies that the intra-gallery reaction, which is responsible for the exfoliation, is not significantly inhibited by the extra-gallery epoxy-amine cross-linking reaction.Peer ReviewedPostprint (published version
Education in Pediatrics in US Colleges and Schools of Pharmacy
Objective. To determine the extent to which pediatrics is taught at US doctor of pharmacy (PharmD) programs and to characterize what is being taught and how. Methods. A 40-question online survey instrument was sent to accredited and candidate-status US PharmD programs. Results. Of 86 participating programs (67.2% response rate), 81 (94.2%) indicated that pediatric topics were included in their required classroom curricula (mean, 21.9 contact hours). A pediatric elective course was offered by 61.0% of programs (mean, 25.9 contact hours). Advanced pharmacy practice experiences (APPEs) in pediatrics were offered by 97.4% of programs, with an average of 27 students per program completing this practice experience annually. Conclusions. Almost all responding programs incorporated pediatrics in their required curricula. Pediatric elective courses provided an adequate mean number of contact hours, but 39.0% of programs did not offer an elective course. One-fifth of students completed a pediatric APPE prior to graduation. Continued expansion of pediatric-focused classroom and experiential curricula across US PharmD programs is recommended
A novel comparative study of different layered silicate clay types on exfoliation process and final nanostructure of trifunctional epoxy nanocomposites
© 2016. This version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/The effect of three different organically modified layered silicate clays (Nanomer I.30E, Cloisite 30B and Nanofil SE 3000) on the exfoliation process and on the thermal properties and nanostructure of cured trifunctional epoxy resin based nanocomposites was studied. Optical microscopy showed that the best and poorest qualities of clay distribution in the epoxy matrix were obtained with Nanofil SE 3000 and Nanomer I.30E, respectively. However, the isothermal differential scanning calorimetry scans show that, of the three systems, it is only the Nanomer clay that promotes intra-gallery reaction due to homopolymerisation, appearing as an initial rapid peak prior to the cross-linking reaction. This rapid intra-gallery reaction is not present in the curing curve for the Cloisite and Nanofil systems. This fact implies that the fully cured nanostructure of the Cloisite and Nanofil system is poorly exfoliated, which is confirmed by small angle X-ray scattering which shows a scattering peak for these systems at around 2.53°, corresponding to about 3.5 nm d-spacing.Peer ReviewedPostprint (author's final draft
Methadone and Corrected QT Prolongation in Pain and Palliative Care Patients: A Case–Control Study
Background: Methadone (ME) is commonly used in pain and palliative care (PPC) patients with refractory pain or intolerable opioid adverse effects (AEs). A unique ME AE is its corrected QT (QTc) interval prolongation risk, but most evidence exists in methadone maintenance therapy patients.
Objective: Our goal was to identify QTc interval prolongation risk factors in PPC patients receiving ME and other medications known to prolong the QTc interval and develop a risk stratification tool.
Design: We performed a case–control study of adult inpatients receiving ME for pain management.
Settings/Subjects: Adult inpatients receiving ME with a QTc \u3e470 msec (males) and \u3e480 msec (females) were matched 1:2 according to age, history of QTc prolongation, and gender with ME patients who did not have a prolonged QTc interval. QTc prolongation risk factors were collected for both groups. Covariates were analyzed using conditional logistic regression. Classification and regression tree analysis was used to identify the ME dose associated with QTc prolongation.
Results: Predictors of QTc prolongation included congestive heart failure (CHF) (OR: 11.9; 95% CI: 3.7–38.2; p \u3c 0.00), peptic ulcer disease (PUD) (odds ratio [OR]: 8.3; 95% confidence interval [95% CI]: 2.4–28.9; p \u3c 0.00), hypokalemia (OR: 6.5; 95% CI: 1.5–28.2; p \u3c 0.01), rheumatologic diseases (OR: 4.7; 95% CI: 1.6–13.9; p \u3c 0.00), taking medications with a known torsades de pointes (TdP) risk (OR: 4.4; 95% CI: 1.8–10.7; p \u3c 0.01), malignancy (OR: 3.3; 95% CI: 1.2–9.3; p \u3c 0.03), hypocalcemia (OR: 2.1; 95% CI: 0.9–4.8; p \u3c 0.07), and ME doses \u3e45 mg per day (OR: 1.9; 95% CI: 0.8–4.8; p \u3c 0.16). Mild liver disease was protective against QTc prolongation (OR: 0.05; 95% CI: 0.0–0.46; p \u3c 0.01).
Conclusions: Predictors of QTc prolongation in our multivariate conditional logistic regression model included CHF, PUD, hypokalemia, rheumatologic disorders, use of medications with a known TdP risk, malignancy, hypocalcemia, and ME doses \u3e45 mg per day
Stability of Diluted Adenosine Solutions in Polyolefin Infusion Bags
Background
Intravenous or intracoronary adenosine is used in the cardiac catherization lab to achieve maximal coronary blood flow and determine fractional flow reserve.
Objective
To determine the stability of adenosine 10 and 50 µg/mL in either 0.9% sodium chloride injection or 5% dextrose injection in polyolefin infusion bags stored at 2 temperatures, refrigeration (2°C-8°C) or controlled room temperature (20°C-25°C).
Methods
Adenosine 10 µg/mL and 50 µg/mL solutions were prepared in 50 mL polyolefin infusion bags containing 0.9% sodium chloride injection or 5% dextrose injection and stored at controlled room temperature or under refrigeration. Each combination of concentration, diluent, and storage was prepared in triplicate. Samples were assayed using stability-indicating, reversed-phase high-performance liquid chromatography immediately at time 0 and at 24 hours, 48 hours, 7 days, and 14 days. Stability was defined as retaining 90% to 110% of the initial adenosine concentration. The samples were also visually inspected against a light background for clarity, color, and the presence of particulate matter.
Results
After 14 days, all samples retained 99% to 101% of the initial adenosine concentration. No considerable change in pH or visual appearance was noted. The stability data indicated no significant loss of drug due to chemical degradation or physical interactions during storage.
Conclusion
Adenosine solutions of 10 and 50 µg/mL were stable for at least 14 days in 50 mL polyolefin infusion bags of 0.9% sodium chloride injection or 5% dextrose injection stored at controlled room temperature and refrigerated conditions
- …