Multimodal person recognition for human-vehicle interaction

Next-generation vehicles will undoubtedly feature biometric person recognition as part of an effort to improve the driving experience. Today's technology prevents such systems from operating satisfactorily under adverse conditions. A proposed framework for achieving person recognition successfully combines different biometric modalities, borne out in two case studies

Evaluation of Using Prenatalcare Services in Outpatients Applying to Gynecology and Obstetric Polyclinic

Purpose: Antenatal care, one of the strategies aimed at protecting maternal and child health, is to monitor the mother by trained health personnel at regular intervals throughout pregnancy. This study aimed to evaluate the prenatal care service use of pregnant women who attend Kartal Dr. Lütfi Kırdar City Hospital Gynecology and Obstetrics Polyclinics. Materials and Methods: The sample universe of this cross-sectional study was pregnant women attending Kartal Dr. Lütfi Kırdar City Hospital Gynecology and Obstetrics Polyclinic between 01.08.2020-01.09.2020. The questionnaire developed by the researchers was applied to the participants by face-to-face interview technique. Results: All the participants (n=403) received at least one prenatal care service from a health institution. 73.4% (n=296) of the pregnant women received prenatal care, which is required according to their weeks of gestation quantitatively. The highest rate of physical examination in antenatal care follow-ups was fetal heart rate, while the lowest rate was the cardiac auscultation and edema examination rates of the pregnant woman. Conclusion: It was seen that all of the pregnant women received antenatal care at least once, but the number of prenatal care follow-ups required in accordance with their gestational weeks was still not at the desired level. For this reason, there is a need for a study to determine the factors that prevent compliance with the follow-ups and to carry out the ideal four follow-ups of all pregnant women

Microfluidic-based virus detection methods for respiratory diseases

With the recent SARS-CoV-2 outbreak, the importance of rapid and direct detection of respiratory disease viruses has been well recognized. The detection of these viruses with novel technologies is vital in timely prevention and treatment strategies for epidemics and pandemics. Respiratory viruses can be detected from saliva, swab samples, nasal fluid, and blood, and collected samples can be analyzed by various techniques. Conventional methods for virus detection are based on techniques relying on cell culture, antigen-antibody interactions, and nucleic acids. However, these methods require trained personnel as well as expensive equipment. Microfluidic technologies, on the other hand, are one of the most accurate and specific methods to directly detect respiratory tract viruses. During viral infections, the production of detectable amounts of relevant antibodies takes a few days to weeks, hampering the aim of prevention. Alternatively, nucleic acid–based methods can directly detect the virus-specific RNA or DNA region, even before the immune response. There are numerous methods to detect respiratory viruses, but direct detection techniques have higher specificity and sensitivity than other techniques. This review aims to summarize the methods and technologies developed for microfluidic-based direct detection of viruses that cause respiratory infection using different detection techniques. Microfluidics enables the use of minimal sample volumes and thereby leading to a time, cost, and labor effective operation. Microfluidic-based detection technologies provide affordable, portable, rapid, and sensitive analysis of intact virus or virus genetic material, which is very important in pandemic and epidemic events to control outbreaks with an effective diagnosis.Qatar National Research Fun

The effects of perforated cylinders on the vortex shedding on the suppression of a circular cylinder

The aim of this study is the control of unsteady vortical flow occurred downstream of a circular cylinder located in shallow water flow using concentrically located outer perforated cylinder. The porosities, β have been changed between 0.1 and 0.8 in the present study. The increments of porosity β were taken as 0.05 in the range of 0.1 and 0.8 with a hole diameter of d=10 mm. The ratio of inner cylinder diameter to outer cylinder diameter, Di/Do was selected as 0.25, 0.3, 0.4, 0.5 and 0.6 the inner cylinder diameter is Di=50mm where the outer cylinder diameter is Dd=100mm. Experiments were performed at a constant depth of the water level as h=50mm (half of the outer cylinder diameter). Free stream velocity was taken as U∞=100 mm/s corresponding to a Reynolds number of Re Do=10000 based on the outer cylinder diameter. It has been observed that the inner circular cylinder was highly affected by the existence of surrounding outer perforated cylinders. It is observed that the intensity of Reynolds shear stress correlating, is completely attenuated in the region both downstream of concentric cylinder and between the concentric cylinders. It is determined from the experiments that porosity, β=0.55 is the most effective parameter for control of flow structure that is occurred from the inner cylinder

Energy Response and Longitudinal Shower Profiles Measured in CMS HCAL and Comparison With Geant4

The response of the CMS combined electromagnetic and hadron calorimeter to beams of pions with momenta in the range 5-300 GeV/c has been measured in the H2 test beam at CERN. The raw response with the electromagnetic compartment calibrated to electrons and the hadron compartment calibrated to 300 GeV pions may be represented by sigma = (1.2) sqrt{E} oplus (0.095) E. The fraction of energy visible in the calorimeter ranges from 0.72 at 5 GeV to 0.95 at 300 GeV, indicating a substantial nonlinearity. The intrinsic electron to hadron ratios are fit as a function of energy and found to be in the range 1.3-2.7 for the electromagnetic compartment and 1.4-1.8 for the hadronic compartment. The fits are used to correct the non-linearity of the e pi response to 5% over the entire measured range resulting in a substantially improved resolution at low energy. Longitudinal shower profile have been measured in detail and compared to Geant4 models, LHEP-3.7 and QGSP-2.8. At energies below 30 GeV, the data, LHEP and QGSP are in agreement. Above 30 GeV, LHEP gives a more accurate simulation of the longitudinal shower profile

Synchronization and Timing in CMS HCAL

The synchronization and timing of the hadron calorimeter (HCAL) for the Compact Muon Solenoid has been extensively studied with test beams at CERN during the period 2003-4, including runs with 40 MHz structured beam. The relative phases of the signals from different calorimeter segments are timed to 1 ns accuracy using a laser and equalized using programmable delay settings in the front-end electronics. The beam was used to verify the timing and to map out the entire range of pulse shapes over the 25 ns interval between beam crossings. These data were used to make detailed measurements of energy-dependent time slewing effects and to tune the electronics for optimal performance

Design, Performance and Calibration of the CMS Forward Calorimeter Wedges

We report on the test beam results and calibration methods using charged particles of the CMS Forward Calorimeter (HF). The HF calorimeter covers a large pseudorapidity region (3\l |\eta| \le 5), and is essential for large number of physics channels with missing transverse energy. It is also expected to play a prominent role in the measurement of forward tagging jets in weak boson fusion channels. The HF calorimeter is based on steel absorber with embedded fused-silica-core optical fibers where Cherenkov radiation forms the basis of signal generation. Thus, the detector is essentially sensitive only to the electromagnetic shower core and is highly non-compensating (e/h \approx 5). This feature is also manifest in narrow and relatively short showers compared to similar calorimeters based on ionization. The choice of fused-silica optical fibers as active material is dictated by its exceptional radiation hardness. The electromagnetic energy resolution is dominated by photoelectron statistics and can be expressed in the customary form as a/\sqrt{E} + b. The stochastic term a is 198% and the constant term b is 9%. The hadronic energy resolution is largely determined by the fluctuations in the neutral pion production in showers, and when it is expressed as in the electromagnetic case, a = 280% and b = 11%

Design, Performance, and Calibration of CMS Hadron Endcap Calorimeters

Detailed measurements have been made with the CMS hadron calorimeter endcaps (HE) in response to beams of muons, electrons, and pions. Readout of HE with custom electronics and hybrid photodiodes (HPDs) shows no change of performance compared to readout with commercial electronics and photomultipliers. When combined with lead-tungstenate crystals, an energy resolution of 8\% is achieved with 300 GeV/c pions. A laser calibration system is used to set the timing and monitor operation of the complete electronics chain. Data taken with radioactive sources in comparison with test beam pions provides an absolute initial calibration of HE to approximately 4\% to 5\%

Design, Performance, and Calibration of the CMS Hadron-Outer Calorimeter

The CMS hadron calorimeter is a sampling calorimeter with brass absorber and plastic scintillator tiles with wavelength shifting fibres for carrying the light to the readout device. The barrel hadron calorimeter is complemented with an outer calorimeter to ensure high energy shower containment in the calorimeter. Fabrication, testing and calibration of the outer hadron calorimeter are carried out keeping in mind its importance in the energy measurement of jets in view of linearity and resolution. It will provide a net improvement in missing \et measurements at LHC energies. The outer hadron calorimeter will also be used for the muon trigger in coincidence with other muon chambers in CMS