1,018 research outputs found
Materials chemistry under high pressures - Some recent aspects
Among the thermodynamic parameters governing the preparation of novel materials, temperature (T) and pressure (p) play an important role. In Materials Chemistry, the synthesis of materials needs energy in order to enhance the diffusion of atoms to the equilibrium positions required by the specific structure and to induce the formation of chemical bonds..
Reformation of casein particles from alkaline-disrupted casein micelles
In this study, the properties of casein particles reformed from alkaline disrupted casein micelles were studied. For this purpose, micelles were disrupted completely by increasing milk pH to 10·0, and subsequently reformed by decreasing milk pH to 6·6. Reformed casein particles were smaller than native micelles and had a slightly lower zeta-potential. Levels of ionic and serum calcium, as well as rennet coagulation time did not differ between milk containing native micelles or reformed casein particles. Ethanol stability and heat stability, >pH7·0, were lower for reformed casein particles than native micelles. Differences in heat stability, ethanol stability and zeta-potential can be explained in terms of the influence of increased concentrations of sodium and chloride ions in milk containing reformed casein particles. Hence, these results indicate that, if performed in a controlled manner, casein particles with properties closely similar to those of native micelles can be reformed from alkaline disrupted casein micelle
Low Temperature Precursor Route for Highly Efficient Spherically Shaped LED-Phosphors M2Si5N8:Eu2+ (M = Eu, Sr, Ba)
The highly efficient nitridosilicate phosphors M2Si5N8 (M = Sr, Ba, Eu) for phosphor-converted pc-LEDs were synthesized at low temperatures using a novel precursor route involving metal amides M(NH2)2. These precursors have been synthesized by dissolution of the respective metals in supercritical ammonia at 150°C and 300 bar. The thermal behavior and decomposition process of the amides were investigated with temperature programmed powder X-ray diffractometry and thermoanalytical measurements (DTA/TG). These investigations rendered the amides as suitable intermediates for reaction with silicon diimide (Si(NH)2). Thus, the desired nitridosilicate phosphors were obtained at relatively low temperatures around 1150â1400°C which is approximately 300°C lower compared to common synthetic approaches starting from metals or oxides. The influence of the thermal treatment on the phosphor morphology has been studied extensively. The accessibility of spherical phosphor particles represents another striking feature of this route since it improves light extraction from the crystallites due to decreasing light guiding and decreasing re-absorption inside the phosphor particle. The synthesized luminescent materials M2Si5N8:Eu2+ (M = Sr, Ba) exhibit quantum efficiencies and emission band widths (FWHM 70â90 nm) comparable to standard phosphor powders. Employment of Eu(NH2)2 as dopant reagent for synthesis of Ba2Si5N8:Eu2+ proved favorable for the formation of spherical crystallites compared to doping with Eu metal, halides, or oxide
Active flow control by means of synthetic jets on a highly loaded compressor cascade
Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugÀnglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.This article presents the potential of active flow control to increase the aerodynamic performance of highly loaded turbomachinery compressor blades. Experimental investigations on a large-scale compressor cascade equipped with 30 synthetic jet actuators mounted to the sidewalls and the blades themselves have been carried out. Results for a variation of the inflow angle, the jet amplitude, and the actuation frequency are presented. The wake measurements show total pressure loss reductions of nearly 10 per cent for the synthetic jet actuation. An efficiency calculation reveals that the energy saved by actuation is nearly twice the energy consumption of the synthetic jets
Experimental and numerical results of active flow control on a highly loaded stator cascade
Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugĂ€nglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.This article presents experimental and numerical results for a compressor cascade with active flow control. Steady and pulsed blowing has been used to control the secondary flow and separation characteristics of a highly loaded controlled diffusion airfoil. Investigations were performed at the design incidence for blowing ratios from approximately 0.7 to 3.0 (jet-to-inlet velocity) and a Reynolds number of 840â000 (based on axial chord and inlet velocity). Detailed flow field data were collected using a five-hole pressure probe, pressure taps on the blade surfaces, and time-resolved Particle Image Velocimetry. Unsteady Reynolds-averaged NavierâStokes simulations were performed for a wide range of flow control parameters. The experimental and numerical results are used to understand the interaction between the jet and the passage flow. The benefit of the flow control on the cascade performance is weighted against the costs of the actuation by introducing an efficiency which takes the presence of the jets into account.DFG, SFB 557, Beeinflussung komplexer turbulenter Scherströmunge
TDP-43 condensation properties specify its RNA binding and regulation
Summary:
Mutations causing amyotrophic lateral sclerosis (ALS) often affect the condensation properties of RNA-binding proteins (RBPs). However, the role of RBP condensation in the specificity and function of protein-RNA complexes remains unclear. We created a series of TDP-43 C-terminal domain (CTD) variants that exhibited a gradient of low to high condensation propensity, as observed in vitro and by nuclear mobility and foci formation. Notably, a capacity for condensation was required for efficient TDP-43 assembly on subsets of RNA-binding regions, which contain unusually long clusters of motifs of characteristic types and density. These âbinding-region condensatesâ are promoted by homomeric CTD-driven interactions and required for efficient regulation of a subset of bound transcripts, including autoregulation of TDP-43 mRNA. We establish that RBP condensation can occur in a binding-region-specific manner to selectively modulate transcriptome-wide RNA regulation, which has implications for remodeling RNA networks in the context of signaling, disease, and evolution
Moisture sorption by dairy powders studied by low-field NMR
The influence of moisture sorption on spinâspin (T2) relaxation times for skim milk powder (SMP), milk protein concentrates (MPC50 and MPC80) and amorphous lactose was studied by low-field nuclear magnetic resonance (NMR). For amorphous lactose and MPC80, only one main peak was observed in the T2 distribution, whereas for SMP and MCP50, two main peaks, relating to the water associated with the amorphous lactose and protein, were observed at aw w >0.4 lactose crystallised and no peak relating to water associated with lactose was visible in the T2 spectrum (water of crystallisation for crystalline lactose has shorter relaxation times, which cannot be detected by low-field NMR). T2 peak position and peak area for the protein fraction increased with increasing aw. Shifts in the T2 peak position showed the transition from mono- and bilayer water at low aw to more rapidly exchanging forms of water at higher aw.</p
Open label multicenter study of once weekly Etanercept 0.8 mg/kg in active polyarticular Juvenile idiopathic arthritis (JIA)
Cd[B2(SO4)4] and H2[B2(SO4)4] â a phyllosilicate-analogous borosulfate and its homeotypic heteropolyacid
Borosulfates consist of heteropolyanionic networks of corner-shared (SO4)- and (BO4)-tetrahedra charge compensated by metal or non-metal cations. The anionic substructures differ significantly, depending on the different branching of the silicate-analogous borosulfate building blocks. However, only one acid has been characterized by single crystal X-ray diffraction so far. Herein, we present H-2[B-2(SO4)(4)] as the first phyllosilicate analogue representative, together with the homeotypic representative Cd[B-2(SO4)(4)]. The latter can be considered the cadmium salt of the former. Their crystal structures and crystallographic relationship are elucidated. For H-2[B-2(SO4)(4)], the bonding situation is examined using Hirshfeld-surface analysis. Further, the optical and thermal properties of Cd[B-2(SO4)(4)] are investigated by FTIR and UV-Vis spectroscopy, thermogravimetry, as well as temperature-programmed powder X-ray diffraction
The Randomized Shortened Dental Arch Study: Tooth Loss
The evidence concerning the management of shortened dental arch (SDA) cases is sparse. This multi-center study was aimed at generating data on outcomes and survival rates for two common treatments, removable dental prostheses (RDP) for molar replacement or no replacement (SDA). The hypothesis was that the treatments lead to different incidences of tooth loss. We included 215 patients with complete molar loss in one jaw. Molars were either replaced by RDP or not replaced, according to the SDA concept. First tooth loss after treatment was the primary outcome measure. This event occurred in 13 patients in the RDP group and nine patients in the SDA group. The respective Kaplan-Meier survival rates at 38 months were 0.83 (95% CI: 0.74-0.91) in the RDP group and 0.86 (95% CI: 0.78-0.95) in the SDA group, the difference being non-significant
- âŠ