A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics

Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction WS₂ solar cells, with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high specific power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly

Combining random forest and 2D correlation analysis to identify serum spectral signatures for neuro-oncology

Fourier transform infrared (FTIR) spectroscopy has long been established as an analytical tech- nique for the measurement of vibrational modes of molecular systems. More recently, FTIR has been used for the analysis of biofluids with the aim of becoming a tool to aid diagnosis. For the clinician, this represents a convenient, fast, non-subjective option for the study of biofluids and the diagnosis of disease states. The patient also benefits from this method, as the procedure for the collection of serum is much less invasive and stressful than traditional biopsy. This is especially true of patients in whom brain cancer is suspected. A brain biopsy carries a degree of morbidity and mortality and on occasion may even be inconclusive. We therefore present a method for the diagnosis of brain cancer from serum samples using FTIR and machine learning techniques. The scope of the study involved 433 patients from whom were collected 9 spectra each in the range 600-4000 cm−1. To begin development of the novel method, various pre-processing steps were investigated and ranked in terms of final accuracy of the diagnosis. Random Forest machine learning was utilised as a classifier to separate patients into cancer or non-cancer categories based upon the intensities of wavenumbers present in their spectra. Generalised 2D correlational analysis was then employed to further augment the machine learning, and also to establish spec- tral features important for the distinction between cancer and non-cancer serum samples. Using these methods, sensitivities of up to 92.8% and specificities of up to 91.5% were possible. Fur- thermore, ratiometrics were also investigated in order to establish any correlations present in the dataset. We show a rapid, computationally light, accurate, statistically robust methodology for the identification of spectral features present in differing disease states. With current advances in IR technology, such as the development of rapid discrete frequency collection, this approach is import to allow future clinical translation and enables IR to achieve its potential

Energy Content of Seeds of Texas Doveweed (Croton texensis) from the Diet of Mourning Doves (Zenaida macroura) from Southeastern New Mexico

We analyzed the energy content of seeds of Texas doveweed (Croton texensis) obtained from the crops of mourning doves (Zenaida macroura) collected from plains-mesa sand-scrub habitat in Eddy and Lea counties, New Mexico. Seeds were removed from crops and dried for 48 hours at 60°C to remove moisture and to standardize masses. Seeds were then analyzed for gross caloric value (i.e., energy content) in an oxygen bomb calorimeter. Energy content of seeds of Texas doveweed was greater than many seeds previously reported from the diet of mourning doves

Olfactory flow in the sea catfish, <i>Ariopsis felis</i> (L.): origin, regulation, and resampling

The olfactory epithelium of the sea catfish, Ariopsis felis, is found on a pinnate array of lamellae (the olfactory rosette) housed within a nasal chamber. The nasal anatomy of A. felis suggests an ability to capture external water currents. We prepared models from X-ray micro-computed tomography scans of two preserved specimens of A. felis. We then used dye visualisation and computational fluid dynamics to show that an external current induced a flow of water through a) the nasal chamber and b) the sensory channels of the olfactory rosette. The factors responsible for inducing flow through the nasal chamber are common to fishes from two other orders. The dye visualisation experiments, together with observations of sea catfishes in vivo, indicate that flow through the nasal chamber is regulated by a mobile nasal flap. The position of the nasal flap – elevated (significant flow) or depressed (reduced flow) – is controlled by the sea catfish’s movements. Flow in the sensory channels of the olfactory rosette can pass through either a single channel or, via multiple pathways, up to four consecutive channels. Flow through consecutive sensory channels (olfactory resampling) is more extensive at lower Reynolds numbers (200 and 300, equivalent to swimming speeds of 0.5 – 1.0 total lengths s-1), coinciding with the mean swimming speed of the sea catfishes observed in vivo (0.6 total lengths s-1). Olfactory resampling may also occur, via a vortex, within single sensory channels. In conclusion, olfactory flow in the sea catfish is regulated and thoroughly sampled by novel mechanisms

Total Neoadjuvant Therapy With Short-Course Radiation: US Experience of a Neoadjuvant Rectal Cancer Therapy

BACKGROUND: Short-course radiation followed by chemotherapy as total neoadjuvant therapy has been investigated primarily in Europe and Australia with increasing global acceptance. There are limited data on this regimen\u27s use in the United States, however, potentially delaying implementation. OBJECTIVE: This study aimed to compare clinical performance and oncologic outcomes of 2 rectal cancer neoadjuvant treatment modalities: short-course total neoadjuvant therapy versus standard chemoradiation. DESIGN: This is a retrospective cohort study. SETTING: This study was performed at a National Cancer Institute-designated cancer center. PATIENTS: A total of 413 patients had locally advanced rectal cancers diagnosed from June 2009 to May 2018 and received either short-course total neoadjuvant therapy or standard chemoradiation. INTERVENTIONS: There were 187 patients treated with short-course total neoadjuvant therapy (5 × 5 Gy radiation followed by consolidation oxaliplatin-based chemotherapy) compared with 226 chemoradiation recipients (approximately 50.4 Gy radiation in 28 fractions with concurrent fluorouracil equivalent). MAIN OUTCOME MEASURES: Primary end points were tumor downstaging, measured by complete response and low neoadjuvant rectal score rates, and progression-free survival. Secondary analyses included treatment characteristics and completion, sphincter preservation, and recurrence rates. RESULTS: Short-course total neoadjuvant therapy was associated with higher rates of complete response (26.2% vs 17.3%; p = 0.03) and low neoadjuvant rectal scores (40.1% vs 25.7%; p \u3c 0.01) despite a higher burden of node-positive disease (78.6% vs 68.9%; p = 0.03). Short-course recipients also completed trimodal treatment more frequently (88.4% vs 50.4%; p \u3c 0.01) and had fewer months with temporary stomas (4.8 vs 7.0; p \u3c 0.01). Both regimens achieved comparable local control (local recurrence: 2.7% short-course total neoadjuvant therapy vs 2.2% chemoradiation, p = 0.76) and 2-year progression-free survival (88.2% short-course total neoadjuvant therapy (95% CI, 82.9-93.5) vs 85.6% chemoradiation (95% CI, 80.5-90.7)). LIMITATIONS: Retrospective design, unbalanced disease severity, and variable dosing of neoadjuvant consolidation chemotherapy were limitations of this study. CONCLUSIONS: Short-course total neoadjuvant therapy was associated with improved downstaging and similar progression-free survival compared with chemoradiation. These results were achieved with shortened radiation courses, improved treatment completion, and less time with diverting ostomies. Short-course total neoadjuvant therapy is an optimal regimen for locally advanced rectal cancer

FDG-PET/MRI for nonoperative management of rectal cancer: A prospective pilot study

Nonoperative management (NOM) is increasingly utilized for rectal cancer patients with a clinical complete response (cCR) following total neoadjuvant therapy (TNT). The objective of this pilot study was to determine whether FDG-PET/MRI alters clinical response assessments among stage I-III rectal cancer patients undergoing TNT followed by NOM, relative to MRI alone. This prospective study included 14 subjects with new rectal cancer diagnoses. Imaging consisted of FDG-PET/MRI for initial staging, post-TNT restaging, and surveillance during NOM. Two independent readers assessed treatment response on MRI followed by FDG-PET/MRI. Inter-reader differences were resolved by consensus review. The reference standard for post-TNT restaging consisted of surgical pathology or clinical follow-up. 7/14 subjects completed post-TNT restaging FDG-PET/MRIs. 5/7 subjects had evidence of residual disease and underwent total mesorectal excision; 2/7 subjects had initial cCR with no evidence of disease after 12 months of NOM. FDG-PET/MRI assessments of cCR status at post-TNT restaging had an accuracy of 100%, compared with 71% for MRI alone, as FDG-PET detected residual tumor in 2 more subjects. Inter-reader agreement for cCR status on FDG-PET/MRI was moderate (kappa, 0.56). FDG-PET provided added value in 82% (9/11) of restaging/surveillance scans. Our preliminary data indicate that FDG-PET/MRI can detect more residual disease after TNT than MRI alone, with the FDG-PET component providing added value in most restaging/surveillance scans

Turbulent ‘stopping plumes’ and plume pinch-off in uniform surroundings

Observations of turbulent convection in the environment are of variously sus- tained plume-like flows or intermittent thermal-like flows. At different times of the day the prevailing conditions may change and consequently the observed flow regimes may change. Understanding the link between these flows is of practical importance meteorologically, and here we focus our interest upon plume-like regimes that break up to form thermal-like regimes. It has been shown that when a plume rises from a boundary with low conductivity, such as arable land, the inability to maintain a rapid enough supply of buoyancy to the plume source can result in the turbulent base of the plume separating and rising away from the source. This plume ‘pinch-off’ marks the onset of the intermittent thermal-like behavior. The dynamics of turbulent plumes in a uniform environment are explored in order to investigate the phenomenon of plume pinch-off. The special case of a turbulent plume having its source completely removed, a ‘stopping plume’, is considered in particular. The effects of forcing a plume to pinch-off, by rapidly reducing the source buoyancy flux to zero, are shown experi- mentally. We release saline solution into a tank filled with fresh water generating downward propagating steady turbulent plumes. By rapidly closing the plume nozzle, the plumes are forced to pinch-off. The plumes are then observed to detach from the source and descend into the ambient. The unsteady buoyant region produced after pinch-off, cannot be described by the power-law behavior of either classical plumes or thermals, and so the terminology ‘stopping plume’ (analogous to a ‘starting plume’) is adopted for this type of flow. The propagation of the stopping plume is shown to be approximately linearly dependent on time, and we speculate therefore that the closure of the nozzle introduces some vorticity into the ambient, that may roll up to form a vortex ring dominating the dynamics of the base of a stopping plume

Two-photon Lithography for 3D Magnetic Nanostructure Fabrication

Ferromagnetic materials have been utilised as recording media within data storage devices for many decades. Confinement of the material to a two dimensional plane is a significant bottleneck in achieving ultra-high recording densities and this has led to the proposition of three dimensional (3D) racetrack memories that utilise domain wall propagation along nanowires. However, the fabrication of 3D magnetic nanostructures of complex geometry is highly challenging and not easily achievable with standard lithography techniques. Here, by using a combination of two-photon lithography and electrochemical deposition, we show a new approach to construct 3D magnetic nanostructures of complex geometry. The magnetic properties are found to be intimately related to the 3D geometry of the structure and magnetic imaging experiments provide evidence of domain wall pinning at a 3D nanostructured junction

Research methods of Talking About The Smokes: an International Tobacco Control Policy Evaluation Project study with Aboriginal and Torres Strait Islander Australians

Objective: To describe the research methods and baseline sample of the Talking About The Smokes (TATS) project.Design: The TATS project is a collaboration between research institutions and Aboriginal community-controlled health services (ACCHSs) and their state and national representative bodies. It is one of the studies within the International Tobacco Control Policy Evaluation Project, enabling national and international comparisons. It includes a prospective longitudinal study of Aboriginal and Torres Strait Islander smokers and recent ex-smokers; a survey of non-smokers; repeated cross-sectional surveys of ACCHS staff; and descriptions of the tobacco policies and practices at the ACCHSs. Community members completed face-to-face surveys; staff completed surveys on paper or online. We compared potential biases and the distribution of variables common to the main community baseline sample and unweighted and weighted results of the 2008 National Aboriginal and Torres Strait Islander Social Survey (NATSISS). The baseline survey (Wave 1) was conducted between April 2012 and October 2013.Setting and participants: 2522 Aboriginal and Torres Strait Islander people in 35 locations (the communities served by 34 ACCHSs and one community in the Torres Strait), and 645 staff in the ACCHSs.Main outcome measures: Sociodemographic and general health indicators, smoking status, number of cigarettes smoked per day and quit attempts.Results: The main community baseline sample closely matched the distribution of the Aboriginal and Torres Strait Islander population in the weighted NATSISS by age, sex, jurisdiction and remoteness. There were inconsistent differences in some sociodemographic factors between our sample and the NATSISS: our sample had higher proportions of unemployed people, but also higher proportions who had completed Year 12 and who lived in more advantaged areas. In both surveys, similar percentages of smokers reported having attempted to quit in the past year, and daily smokers reported similar numbers of cigarettes smoked per day.Conclusion: The TATS project provides a detailed and nationally representative description of Aboriginal and Torres Strait Islander smoking behaviour, attitudes, knowledge and exposure to tobacco control activities and policies, and their association with quitting