Propagation and nanofocusing of infrared surface plasmons on tapered transmission lines: Influence of the substrate

We study the propagation of mid-infrared surface plasmons on non-tapered and tapered two-wire transmission lines on Si and CaF 2 substrates, the two materials representing substrates with large and small refractive index, respectively. A comparative numerical study predicts a larger effective wavelength and an increased propagation length (i.e. weaker damping) for the CaF 2 substrate. By near-field microscopy we image the near-field distribution along the transmission lines and experimentally verify surface plasmon propagation. Amplitude- and phase-resolved near-field images of a non-tapered transmission line on CaF 2 reveal a standing wave pattern caused by back-reflection of the surface plasmons at the open-ended transmission line. Calculated and experimental near-field images of tapered transmission lines on Si and CaF 2 demonstrate that for both substrates the mid-IR surface plasmons are compressed when propagating along the taper. Importantly, the nanofocus at the taper apex yields a stronger local field enhancement for the low-refractive index substrate CaF 2. We assign the more efficient nanofocusing on CaF 2 to the weaker damping of the surface plasmons.Fil: Sarriugarte, P.. No especifíca;Fil: Schnell, M.. No especifíca;Fil: Alonso González, P.. No especifíca;Fil: Arzubiaga, L.. No especifíca;Fil: Golmar, Federico. Instituto Nacional de Tecnología Industrial; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Casanova, F.. No especifíca;Fil: Hueso, L. E.. No especifíca;Fil: Hillenbrand, R.. No especifíca

Two-dimensional simulation of the electron transport in a photomultiplier tube

Photomultiplier tubes are widely used in experimental physics because they convert small light signals into a measurable electric current. Although their working principle is well known, it is very difficult to find simulations of the electron transport in these devices. For this reason, the electron transport in the Hamamatsu R13408-100 photomultiplier tube has been simulated in 2D. The software SUPERFISH is used for calculating the electrostatic fields and the Boris method for the effective electron dynamics. The secondary electron emission in the dynodes is implemented using an effective electron model and the modified Vaughan’s model. Some figures of merit for photomultiplier tubes (e.g. the gain, the electron transit time or the transit time spread) in function of the supply voltage and an external magnetic field have been studied obtaining a good qualitative accordance with the Hamamatsu datasheet. In further studies, we are going to compare our simulations with experimental measurements

Experimental characterization and test-beam results of MACACO III Compton camera

The IRIS group at IFIC-Valencia is developing a Compton camera prototype with the aim of applying it in hadron therapy treatment monitoring. Recently, a third version of the prototype MACACO (Medical Applications CompAct COmpton camera) has been built. The system is composed of three Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. To improve its performance for the final application, several detectors are tested, two different silicon photomultipliers (25 and 50 um) have been chosen as possible candidates. The 25 up photodetector provided better performance in therms of dynamic range, energy resolution (5.2/ FWHM at 511 keV) and stability with temperature variations. MACACO III has also been tested in the CNA cyclotron (Seville) with 18 MeV proton beam to produce 4.439 MeV gamma rays. Data have been acquired with a graphite target in five different positions at 2.5 nA nominal beam intensity. Images with 4.439 MeV photons have been reconstructed, demonstrating the system capability to reconstruct images at energies relevant for hadron therapy. Moreover, the system has been able to distinguish 1mm displacements in the target position

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p

Gamma-ray sources imaging and test-beam results with MACACO III Compton camera

Hadron therapy is a radiotherapy modality which offers a precise energy deposition to the tumors and a dose reduction to healthy tissue as compared to conventional methods. However, methods for real-time monitoring are required to ensure that the radiation dose is deposited on the target. The IRIS group of IFIC-Valencia developed a Compton camera prototype for this purpose, intending to image the Prompt Gammas emitted by the tissue during irradiation. The system detectors are composed of Lanthanum (III) bromide scintillator crystals coupled to silicon photomultipliers. After an initial characterization in the laboratory, in order to assess the system capabilities for future experiments in proton therapy centers, different tests were carried out in two facilities: PARTREC (Groningen, The Netherlands) and the CNA cyclotron (Sevilla, Spain). Characterization studies performed at PARTREC indicated that the detectors linearity was improved with respect to the previous version and an energy resolution of 5.2 % FWHM at 511 keV was achieved. Moreover, the imaging capabilities of the system were evaluated with a line source of 68Ge and a point-like source of 241Am-9Be. Images at 4.439 MeV were obtained from irradiation of a graphite target with an 18 MeV proton beam at CNA, to perform a study of the system potential to detect shifts at different intensities. In this sense, the system was able to distinguish 1 mm variations in the target position at different beam current intensities for measurement times of 1800 and 600 s.</p