Nitrate and Chloride Concentrations in Groundwater beneath a Portion of the Trinity Group Outcrop Zone, Texas

ABSTRACT: Using a geographic information system and statistics, we evaluated spatial distributions of nitrate and chloride concentrations in groundwater in an area of north-central Texas with agricultural activity, in addition to oil and natural gas exploration and production. Data were compiled from 40 water wells sampled in 2007. Nitrate concentrations in three wells exceeded the maximum contaminant level (44 mg/L) for drinking water. The highest nitrate concentration was 149 mg/L, and concentrations were generally higher in shallower wells. Chloride concentrations exceeded the 250 mg/L secondary drinking water standard in two wells, with no significant association between chloride concentration and well depth. Results of this study suggest localized human impacts, especially for nitrate, and identify areas warranting future monitoring

Nitrate and Chloride Concentrations in Groundwater beneath a Portion of the Trinity Group Outcrop Zone, Texas

ABSTRACT: Using a geographic information system and statistics, we evaluated spatial distributions of nitrate and chloride concentrations in groundwater in an area of north-central Texas with agricultural activity, in addition to oil and natural gas exploration and production. Data were compiled from 40 water wells sampled in 2007. Nitrate concentrations in three wells exceeded the maximum contaminant level (44 mg/L) for drinking water. The highest nitrate concentration was 149 mg/L, and concentrations were generally higher in shallower wells. Chloride concentrations exceeded the 250 mg/L secondary drinking water standard in two wells, with no significant association between chloride concentration and well depth. Results of this study suggest localized human impacts, especially for nitrate, and identify areas warranting future monitoring

Nitrate, Arsenic and Selenium Concentrations in the Pecos Valley Aquifer

ABSTRACT: Nitrate, arsenic, and selenium concentrations in the Pecos Valley Aquifer of west Texas were compiled, mapped, and analyzed in the context of local geology and land use. Alluvial deposits of sand, silt, clay, and gravel compose the unconfined aquifer. Ranching and farming are predominant land uses in the rural study area. Data were tabulated from 79 water wells with a median depth of 75 m and mapped with a geographic information system (GIS). The wells were sampled between the years 2003 and 2008. Total dissolved solids (TDS) concentrations in the aquifer were very high, with a median value of 2,687 mg/L. Approximately 18% of observations exceeded the 44.27 mg/L drinking water standard for nitrate, whereas 6% exceeded the 10 µg/L standard for arsenic, and only 4% surpassed the 50 µg/L standard for selenium. There was a statistically significant, direct correlation between arsenic and selenium, as well as between nitrate and selenium concentrations. Moreover, arsenic and selenium concentrations were significantly higher in shallower wells. Probable sources of groundwater contamination in the study area include natural (geological) sources and agricultural activity

Nitrate, Arsenic and Selenium Concentrations in the Pecos Valley Aquifer

ABSTRACT: Nitrate, arsenic, and selenium concentrations in the Pecos Valley Aquifer of west Texas were compiled, mapped, and analyzed in the context of local geology and land use. Alluvial deposits of sand, silt, clay, and gravel compose the unconfined aquifer. Ranching and farming are predominant land uses in the rural study area. Data were tabulated from 79 water wells with a median depth of 75 m and mapped with a geographic information system (GIS). The wells were sampled between the years 2003 and 2008. Total dissolved solids (TDS) concentrations in the aquifer were very high, with a median value of 2,687 mg/L. Approximately 18% of observations exceeded the 44.27 mg/L drinking water standard for nitrate, whereas 6% exceeded the 10 µg/L standard for arsenic, and only 4% surpassed the 50 µg/L standard for selenium. There was a statistically significant, direct correlation between arsenic and selenium, as well as between nitrate and selenium concentrations. Moreover, arsenic and selenium concentrations were significantly higher in shallower wells. Probable sources of groundwater contamination in the study area include natural (geological) sources and agricultural activity

Does inter-vertebral range of motion increase after spinal manipulation? A prospective cohort study.

Background: Spinal manipulation for nonspecific neck pain is thought to work in part by improving inter-vertebral range of motion (IV-RoM), but it is difficult to measure this or determine whether it is related to clinical outcomes. Objectives: This study undertook to determine whether cervical spine flexion and extension IV-RoM increases after a course of spinal manipulation, to explore relationships between any IV-RoM increases and clinical outcomes and to compare palpation with objective measurement in the detection of hypo-mobile segments. Method: Thirty patients with nonspecific neck pain and 30 healthy controls matched for age and gender received quantitative fluoroscopy (QF) screenings to measure flexion and extension IV-RoM (C1-C6) at baseline and 4-week follow-up between September 2012-13. Patients received up to 12 neck manipulations and completed NRS, NDI and Euroqol 5D-5L at baseline, plus PGIC and satisfaction questionnaires at follow-up. IV-RoM accuracy, repeatability and hypo-mobility cut-offs were determined. Minimal detectable changes (MDC) over 4 weeks were calculated from controls. Patients and control IV-RoMs were compared at baseline as well as changes in patients over 4 weeks. Correlations between outcomes and the number of manipulations received and the agreement (Kappa) between palpated and QF-detected of hypo-mobile segments were calculated. Results: QF had high accuracy (worst RMS error 0.5o) and repeatability (highest SEM 1.1o, lowest ICC 0.90) for IV-RoM measurement. Hypo-mobility cut offs ranged from 0.8o to 3.5o. No outcome was significantly correlated with increased IV-RoM above MDC and there was no significant difference between the number of hypo-mobile segments in patients and controls at baseline or significant increases in IV-RoMs in patients. However, there was a modest and significant correlation between the number of manipulations received and the number of levels and directions whose IV-RoM increased beyond MDC (Rho=0.39, p=0.043). There was also no agreement between palpation and QF in identifying hypo-mobile segments (Kappa 0.04-0.06). Conclusions: This study found no differences in cervical sagittal IV-RoM between patients with non-specific neck pain and matched controls. There was a modest dose-response relationship between the number of manipulations given and number of levels increasing IV-RoM - providing evidence that neck manipulation has a mechanical effect at segmental levels. However, patient-reported outcomes were not related to this

Liberal Typing for Functional Logic Programs

We propose a new type system for functional logic programming which is more liberal than the classical Damas-Milner usually adopted, but it is also restrictive enough to ensure type soundness. Starting from Damas-Milner typing of expressions we propose a new notion of well-typed program that adds support for type-indexed functions, existential types, opaque higher-order patterns and generic functions-as shown by an extensive collection of examples that illustrate the possibilities of our proposal. In the negative side, the types of functions must be declared, and therefore types are checked but not inferred. Another consequence is that parametricity is lost, although the impact of this flaw is limited as "free theorems" were already compromised in functional logic programming because of non-determinism

An overview of the ciao multiparadigm language and program development environment and its design philosophy

We describe some of the novel aspects and motivations behind the design and implementation of the Ciao multiparadigm programming system. An important aspect of Ciao is that it provides the programmer with a large number of useful features from different programming paradigms and styles, and that the use of each of these features can be turned on and off at will for each program module. Thus, a given module may be using e.g. higher order functions and constraints, while another module may be using objects, predicates, and concurrency. Furthermore, the language is designed to be extensible in a simple and modular way. Another important aspect of Ciao is its programming environment, which provides a powerful preprocessor (with an associated assertion language) capable of statically finding non-trivial bugs, verifying that programs comply with specifications, and performing many types of program optimizations. Such optimizations produce code that is highly competitive with other dynamic languages or, when the highest levéis of optimization are used, even that of static languages, all while retaining the interactive development environment of a dynamic language. The environment also includes a powerful auto-documenter. The paper provides an informal overview of the language and program development environment. It aims at illustrating the design philosophy rather than at being exhaustive, which would be impossible in the format of a paper, pointing instead to the existing literature on the system

Shape Analysis in the Absence of Pointers and Structure

discover properties of dynamic and/or mutable structures. We ask, “Is there an equivalent to shape analysis for purely functional programs, and if so, what ‘shapes ’ does it discover? ” By treating binding environments as dynamically allocated structures, by treating bindings as addresses, and by treating value environments as heaps, we argue that we can analyze the “shape ” of higher-order functions. To demonstrate this, we enrich an abstract-interpretive control-flow analysis with principles from shape analysis. In particular, we promote “anodization ” as a way to generalize both singleton abstraction and the notion of focusing, and we promote “binding invariants ” as the analog of shape predicates. Our analysis enables two optimizations known to be beyond the reach of control-flow analysis (globalization and super-β inlining) and one previously unknown optimization (higher-order rematerialization).

Open reduction and internal fixation compared to closed reduction and external fixation in distal radial fractures: A randomized study of 50 patients

Background and purpose In unstable distal radial fractures that are impossible to reduce or to maintain in reduced position, the treatment of choice is operation. The type of operation and the choice of implant, however, is a matter of discussion. Our aim was to investigate whether open reduction and internal fixation would produce a better result than traditional external fixation