2,052 research outputs found

    Enhanced photovoltaic performance of silver@titania plasmonic photoanode in dye-sensitized solar cells

    Get PDF
    In the present investigation, silver@titania (Ag@TiO2) plasmonic nanocomposite materials with different Ag content were prepared using a simple one-step chemical reduction method and used as a photoanode in high-performance dye-sensitized solar cells. Transmission electron microscopic images revealed the uniform distribution of ultra-small Ag nanoparticles with a particle size range of 2–4 nm on the TiO2 surface. The incorporation of Ag on the TiO2 surface significantly influenced the optical properties in the region of 400–500 nm because of the surface plasmon resonance effect. The dye-sensitized solar cells (DSSCs) assembled with the Ag@TiO2-modified photoanode demonstrated an enhanced solar-to-electrical energy conversion efficiency (4.86%) compared to that of bare TiO2 (2.57%), due to the plasmonic effect of Ag. In addition, the Ag nanoparticles acted as an electron sink, which retarded the charge recombination. The influence of the Ag content on the overall efficiency was also investigated, and the optimum Ag content with TiO2 was found to be 2.5 wt%. The enhanced solar energy conversion efficiency of the Ag@TiO2 nanocomposite makes it a promising alternative to conventional photoanode-based DSSCs

    IsaB Inhibits Autophagic Flux to Promote Host Transmission of Methicillin-Resistant Staphylococcus aureus.

    Get PDF
    Methicillin-resistant Staphylococcus aureus (MRSA) has emerged as a major nosocomial pathogen that is widespread in both health-care facilities and in the community at large, as a result of direct host-to-host transmission. Several virulence factors are associated with pathogen transmission to naive hosts. Immunodominant surface antigen B (IsaB) is a virulence factor that helps Staphylococcus aureus to evade the host defense system. However, the mechanism of IsaB on host transmissibility remains unclear. We found that IsaB expression was elevated in transmissible MRSA. Wild-type isaB strains inhibited autophagic flux to promote bacterial survival and elicit inflammation in THP-1 cells and mouse skin. MRSA isolates with increased IsaB expression showed decreased autophagic flux, and the MRSA isolate with the lowest IsaB expression showed increased autophagic flux. In addition, recombinant IsaB rescued the virulence of the isaB deletion strain and increased the group A streptococcus (GAS) virulence in vivo. Together, these results reveal that IsaB diminishes autophagic flux, thereby allowing MRSA to evade host degradation. These findings suggest that IsaB is a suitable target for preventing or treating MRSA infection

    Aerosol assisted chemical vapour deposited (AACVD) of TiO2 thin film as compact layer for dye-sensitised solar cell

    Get PDF
    Compact TiO2 has been introduced onto the surface of an indium tin oxide glass slide (ITO), using an aerosol-assisted chemical vapour deposition method. This serves as a blocking layer for a dye-sensitised solar cell (DSSC). The thickness of the compact TiO2 could be controlled by deposition time. X-ray diffraction and Raman spectroscopy analyses reveal that the compact TiO2 is made up of mixed anatase and rutile phases. The field emission scanning electron microscopy image displays a pyramidal morphology of the compact TiO2. A layer of P25 paste was then smeared onto the compact TiO2-modified ITO, using the doctor's blade method. A post-treatment procedure was applied to remove the contaminants from the prepared hybrid film, by immersing in a hydrochloric acid solution. The photoelectrochemical measurements and J–V characterisation of the hybrid film show an approximately fourfold increase in photocurrent density generation (114.22 µA/cm2), and approximately 25% enhancement of DSSC conversion efficiency (4.63%), compared to the acid-treated P25 paste alone (3.68%)

    Silver/titania nanocomposite-modified photoelectrodes for photoelectrocatalytic methanol oxidation

    Get PDF
    Silver deposited titania (Ag/TiO2) nanocomposite thin films were fabricated by the simple sonochemical deposition of Ag on preformed aerosol-assisted chemical vapor deposited TiO2 thin films. The photelectrocatalytic performance of a newly fabricated Ag/TiO2-modified photoelectrode was studied for methanol oxidation under simulated solar AM 1.5G irradiation (100 mW/cm2). The Ag/TiO2-modified photoelectrode showed a photocurrent density of 1 mA/cm2, which is four times that of an unmodified TiO2 photoelectrode. The modification of Ag on the TiO2 surface significantly enhanced the photoelectrocatalytic performance by improving the interfacial charge transfer processes, which minimized the charge recombination. Density functional theory (DFT) calculation studies revealed that methanol could be easily adsorbed onto the Ag surfaces of Ag/TiO2 via a partial electron transfer from Ag to methanol. The newly fabricated Ag/TiO2-modified photoelectrode could be a promising candidate for photoelectrochemical applications

    An ERP System Life Cycle-Wide Management and Support Framework for Small- and Medium-Sized Companies

    Get PDF
    Currently, the companies that have introduced the ERP system in Taiwan are mostly large enterprises. Due to the high cost of introduction and uncertain performance, however, ordinary small- and medium-sized enterprises can hardly afford the system. Thus, not only would a reference model for ERP life offer cycle-wide management support and assist large enterprises in evaluating and renewing the system, but it would also offer small- and medium-sized enterprises a set of procedures to successfully introduce the ERP system. The objective of this research is to explore the life cycle-wide management and support activities of an ERP system in order to establish a managerial model which can be used as a guideline for managers in dealing with their critical managerial activities. This study applied both the results from the literature review and Delphi study on the basis of Gowin\u27s Vee Approach. Through literature review, this research initially determined the life cycle-wide activities of the ERP system and then used the Grounded Theory to develop a prototype of the reference model for ERP life cycle-wide management and support. Subsequently, this study used the Delphi Method to collect the opinions of field experts. After analyzing and organizing the results, comparison and amendments were made to propose a final set of reference models for ERP life cycle-wide management and support. From the perspective of academic research, the authors believe that this study contributes to the development of a managerial model and provides prospective researchers with future directions in this subject area. As for the business sector, this managerial model can assist large enterprises through a better approach in management and support of the current ERP system, while small- and medium-sized enterprises are provided with a set of concrete steps to facilitate the successful introduction of the ERP system
    corecore