13 research outputs found
Biotemplating of Al<sub>2</sub>O<sub>3</sub>-Doped, CaO-Based Material from Bamboo Fiber for Efficient Solar Energy Storage
The high-temperature sintering of CaO-based materials leads to the serious decay of energy storage performance during the calcination/carbonation cycle. To overcome the loss in porosity problem, an efficient CaO-based material for thermal energy storage was synthesized using bamboo fiber as the biotemplate. The synthesis parameters (bamboo fiber addition, pyrolysis, Al2O3 loading) and the energy storage reaction characteristics of CaO-based energy storage material were optimized on the basis of cyclic calcination/carbonation experiments. The results show that the sacrificed biotemplate enhances the porosity of the synthetic material, denoting improved energy storage density. The cumulative energy storage density of the templated material over 50 cycles is 24,131.44 kJ/kg higher than that of limestone. The carbonation conversion and energy storage density of the templated CaO-based material doped with 5 wt.% Al2O3 and 0.5 g bamboo fiber reach 0.75 mol/mol and 2368.82 kJ/kg after 10 cycles, respectively, which is 2.7 times as high as that of original limestone. The maximum apparent carbonation rate of the templated CaO-based materials in the 1st cycle corresponds to a 240% increment compared to limestone. The maximum calcination rate of the synthetic CaO-based material in the 12th cycle remains 93%, as compared with the initial cycle. The microstructure analysis reveals that the hierarchically-stable structure during the cycle is beneficial for a more effective exposure of surface reactive sites for CaO and inward/outward diffusion for CO2 molecules through CaO. The method using the sacrificed biological template provides an advanced approach to fabricate porous materials, and the composite CaO-based material provides high-return solar energy storage for a potential application in industrial scale
Study on the Optimized Muffler with Function of PM Filtration for Non-Road Diesel Engines
With a high thermal efficiency, high reliability and good fuel economy, diesel engines have been widely used. However, with the increasingly stringent standards regarding non-road diesel engine emissions, diesel engines can hardly satisfy the particle emission requirements through internal purification alone. To reduce the particle emission and noise levels of the non-road diesel engine R180, this paper optimized the original muffler, and endowed the muffler with a particulate matter (PM) filtering function to improve the muffling. This study first proposed stainless steel fiber as the filtering medium as it is inexpensive and accessible; a bench experiment was conducted to verify the particle filtration performance and its effect on the overall engine performance. Then, the structure of the existing muffler in non-road diesel engines R180 was optimized, and the stainless steel fiber filtering was integrated. The internal flow field of the optimized muffler was obtained in the computational fluid dynamics software FLUENT, and the acoustic and filtration performance was studied. The experimental and simulation results indicated that the optimized muffler could achieve both particle filtration and noise reduction
A Monoclonal Antibody-Based Immunochromatographic Test Strip and Its Application in the Rapid Detection of Cucumber Green Mottle Mosaic Virus
Two specific monoclonal antibodies (mAbs) were screened, and an immunochromatographic strip (ICS) test for rapid and specific detection of cucumber green mottle mosaic virus (CGMMV) was developed. The coat protein of CGMMV was heterologously expressed as an immunogen, and specific capture mAb 2C9 and the detection mAb 4D4 were screened by an uncompetitive immunoassay. The test and control lines on the nitrocellulose membrane were coated with the purified 2C9 and a goat anti-mouse IgG, respectively, and a nanogold probe combined with 4D4 was applied to the conjugate pad. Using these mAbs, a rapid and sensitive ICS was developed. Within the sandwich mode of 2C9–CGMMV–4D4, the test line showed a corresponding positive relationship with CGMMV in infected samples. The ICS test had a detection limit of 1:5000 (w/v) for CGMMV in samples and was specific for CGMMV, with no observed cross-reaction with TMV or CMV
A Prospective Study of Fruit Juice Consumption and the Risk of Overall and Cardiovascular Disease Mortality
There is little evidence for the association between fruit juice, especially 100% fruit juice, and mortality risk. In addition, whether 100% fruit juice can be a healthy alternative to whole fruit remains uncertain. This prospective study utilized the data from the US National Health and Nutrition Examination Survey (NHANES) from 1999 to 2014. After a median follow-up of 7.8 years, 4904 deaths among 40,074 participants aged 18 years or older were documented. Compared to non-consumption, daily consumption of 250 g or more of 100% fruit juice was associated with higher overall mortality (hazard ratio (HR) = 1.30, 95% confidence interval (CI): 1.11–1.52) and mortality from heart disease (HR = 1.49, 95 CI: 1.01–2.21). A similar pattern was observed for total fruit juice, with HRs of 1.28 (95% CI: 1.09–1.49) for overall mortality and 1.48 (95% CI: 1.01–2.17) for heart disease mortality. Replacing 5% of energy from whole fruit with 100% or total fruit juice was associated with a 9% (95% CI: 2–16%) and 8% (95% CI: 1–15%) increased mortality risk, respectively. Our findings suggest that both total and 100% fruit juice could be associated with high mortality risk, and need to be validated in well-designed studies given the potential misclassification of diet and death reasons
Development of Low-Cost Porous Carbons through Alkali Activation of Crop Waste for CO<sub>2</sub> Capture
To achieve the “double carbon” (carbon
peak and carbon
neutrality) target, low-cost CO2 capture at large CO2 emission points is of great importance, during which the
development of low-cost CO2 sorbents will play a key role.
Here, we chose peanut shells (P) from crop waste as the raw material
and KOH and K2CO3 as activators to prepare porous
carbons by a simple one-step activation method. Interestingly, the
porous carbon showed a good adsorption capacity of 2.41 mmol/g for
15% CO2 when the mass ratio of K2CO3 to P and the activation time were only 0.5 and 0.5 h, respectively,
and the adsorption capacity remained at 98.76% after 10 adsorption–desorption
cycle regenerations. The characterization results suggested that the
activated peanut shell-based porous carbons were mainly microporous
and partly mesoporous, and hydroxyl (O–H), ether (C–O),
and pyrrolic nitrogen (N-5) functional groups that promoted CO2 adsorption were formed during activation. In conclusion,
KOH- and K2CO3-activated P, especially K2CO3-activated P, showed good CO2 adsorption
and regeneration performance. In addition, not only the use of a small
amount of the activator but also the raw material of crop waste reduces
the sorbent preparation costs and CO2 capture costs
Tailoring the co2-selectivity of interfacial polymerized thin film nanocomposite membrane via the barrier effect of functionalized boron nitride
Membrane-based separation is an appealing solution to mitigate CO2 emission sustainably due to its energy efficiency and environmental friendliness. Attributed to its excellent separation endowed by nanomaterial incorporation, nanocomposite membrane is rigorously developed. This study explored the feasibility of boron nitride (BN) embedment and changes to formation mechanism of ultrathin selective layer of thin film nanocomposite (TFN) are investigated. The effects of amine-functionalization on nanosheet-polymer interaction and CO2 separation performance are also identified. Participation of nanosheets during interfacial polymerization reduced the crosslinking of selective layer, hence, improved TFN permeance while the formation of contorted diffusion paths by the nanosheets favors transport of small gases. Amine-functionalization enhanced the nanosheet-polymer interaction and elevated the membrane affinity towards CO2 which led to enhanced CO2 selectivity. The best TFN prepared in this study exhibited 37% and 20% increment in permeability and selectivity, respectively with respect to neat thin film composite (TFC). It is found that the CO2 separation performance of BN incorporated TFN is on par with many non-porous nanosheet-incorporated TFNs reported in literatures. The transport and barrier effects of BN and functionalized BN are discussed in detail to provide further insights into the development of commercially attractive CO2 selective TFN membranes
Optimization of Chemical Looping Pyrolysis System of Coal Tar by Combined Simulation and Experiments
Dietary inflammatory potential is associated with higher odds of hepatic steatosis in US adults: a cross-sectional study
Abstract
Objective:
Inflammation plays a critical role in the progression of chronic liver diseases, and diet can modulate inflammation. Whether an inflammatory dietary pattern is associated with higher risk of hepatic steatosis or fibrosis remains unclear. We aimed to investigate the associations between inflammatory dietary pattern and the odds of hepatic steatosis and fibrosis.
Design:
In this nationwide cross-sectional study, diet was measured using two 24-h dietary recalls. Empirical dietary inflammatory pattern (EDIP) score was derived to assess the inflammatory potential of usual diet, which has been validated to highly predict inflammation markers in the study population. Controlled attenuation parameter (CAP) and liver stiffness measurement (LSM) were derived from FibroScan to define steatosis and fibrosis, respectively.
Setting:
US National Health and Nutrition Examination Survey.
Participants:
4171 participants aged ≥18 years.
Results:
A total of 1436 participants were diagnosed with S1 steatosis (CAP ≥ 274 dB/m), 255 with advanced fibrosis (LSM ≥ 9·7 kPa). Compared with those in the lowest tertile of EDIP-adherence scores, participants in the highest tertile had 74 % higher odds of steatosis (OR: 1·74, 95 % CI (1·26, 2·41)). Such positive association persisted among never drinkers, or participants who were free of hepatitis B and/or C. Similarly, EDIP was positively associated with CAP in multivariate linear model (P < 0·001). We found a non-significant association of EDIP score with advanced fibrosis or LSM (P = 0·837).
Conclusions:
Our findings suggest that a diet score that is associated with inflammatory markers is associated with hepatic steatosis. Reducing or avoiding pro-inflammatory diets intake might be an attractive strategy for fatty liver disease prevention
A Healthful Plant-Based Diet Is Associated with Lower Odds of Nonalcoholic Fatty Liver Disease
There is little evidence for the associations of the overall plant-based diet index (PDI), the healthful PDI (hPDI), and the unhealthful PDI (uPDI) with the odds of nonalcoholic fatty liver disease (NAFLD). We present a nationwide cross-sectional study among US adults aged 18 years or older. Diet was assessed by 24-h recalls. Overall PDI, hPDI, and uPDI were constructed based on 18 food groups. NAFLD was defined based on controlled attenuation parameter derived via transient elastography (TE) in the absence of other causes of chronic liver disease. Among 3900 participants with eligible TE examination, 1686 were diagnosed with NAFLD. The overall PDI was not associated with NAFLD prevalence (comparing extreme tertiles of PDI score OR = 1.03, 95% CI 0.76, 1.38, ptrend = 0.609). However, hPDI was inversely (OR = 0.50, 95% CI 0.35, 0.72, ptrend ptrend = 0.009) in the multivariable-adjusted models without body mass index (BMI). After further adjustment for BMI, only the association of hPDI with NAFLD remained statistically significant (OR = 0.64, 95% CI 0.46, 0.87, ptrend = 0.006). Such inverse association appeared stronger in non-Hispanic whites, but not in other racial/ethnic groups (pinteraction = 0.009). Our findings suggest that a plant-based diet rich in healthy plant foods might be associated with lower odds of NAFLD, particularly among US non-Hispanic whites. Clinical trials and cohort studies to validate our findings are needed