27,853 research outputs found
Recommended from our members
Investigating the impact of remotely sensed precipitation and hydrologic model uncertainties on the ensemble streamflow forecasting
In the past few years sequential data assimilation (SDA) methods have emerged as the best possible method at hand to properly treat all sources of error in hydrological modeling. However, very few studies have actually implemented SDA methods using realistic input error models for precipitation. In this study we use particle filtering as a SDA method to propagate input errors through a conceptual hydrologic model and quantify the state, parameter and streamflow uncertainties. Recent progress in satellite-based precipitation observation techniques offers an attractive option for considering spatiotemporal variation of precipitation. Therefore, we use the PERSIANN-CCS precipitation product to propagate input errors through our hydrologic model. Some uncertainty scenarios are set up to incorporate and investigate the impact of the individual uncertainty sources from precipitation, parameters and also combined error sources on the hydrologic response. Also probabilistic measure are used to quantify the quality of ensemble prediction. Copyright 2006 by the American Geophysical Union
Anisotropic superconducting properties of aligned SmLaFeAsOF microcrystalline powder
The SmLaFeAsOF compound is a quasi-2D
layered superconductor with a superconducting transition temperature T = 52
K. Due to the Fe spin-orbital related anisotropic exchange coupling
(antiferromagnetic or ferromagnetic fluctuation), the tetragonal
microcrystalline powder can be aligned at room temperature using the
field-rotation method where the tetragonal -plane is parallel to the
aligned magnetic field B and -axis along the rotation axis.
Anisotropic superconducting properties with anisotropic diamagnetic ratio
2.4 + 0.6 was observed from low field susceptibility
(T) and magnetization M(B). The anisotropic low-field phase diagram
with the variation of lower critical field gives a zero-temperature penetration
depth (0) = 280 nm and (0) = 120 nm. The magnetic
fluctuation used for powder alignment at 300 K may be related with the pairing
mechanism of superconductivity at lower temperature.Comment: 4 pages, 6 figure
Recommended from our members
Uncertainty quantification of satellite precipitation estimation and Monte Carlo assessment of the error propagation into hydrologic response
The aim of this paper is to foster the development of an end-to-end uncertainty analysis framework that can quantify satellite-based precipitation estimation error characteristics and to assess the influence of the error propagation into hydrological simulation. First, the error associated with the satellite-based precipitation estimates is assumed as a nonlinear function of rainfall space-time integration scale, rain intensity, and sampling frequency. Parameters of this function are determined by using high-resolution satellite-based precipitation estimates and gauge-corrected radar rainfall data over the southwestern United States. Parameter sensitivity analysis at 16 selected 5° × 5° latitude-longitude grids shows about 12-16% of variance of each parameter with respect to its mean value. Afterward, the influence of precipitation estimation error on the uncertainty of hydrological response is further examined with Monte Carlo simulation. By this approach, 100 ensemble members of precipitation data are generated, as forcing input to a conceptual rainfall-runoff hydrologic model, and the resulting uncertainty in the streamflow prediction is quantified. Case studies are demonstrated over the Leaf River basin in Mississippi. Compared with conventional procedure, i.e., precipitation estimation error as fixed ratio of rain rates, the proposed framework provides more realistic quantification of precipitation estimation error and offers improved uncertainty assessment of the error propagation into hydrologic simulation. Further study shows that the radar rainfall-generated streamflow sequences are consistently contained by the uncertainty bound of satellite rainfall generated streamflow at the 95% confidence interval. Copyright 2006 by the American Geophysical Union
High Input Impedance Voltage-Mode Universal Biquadratic Filters With Three Inputs Using Three CCs and Grounding Capacitors
Two current conveyors (CCs) based high input impedance voltage-mode universal biquadratic filters each with three input terminals and one output terminal are presented. The first circuit is composed of three differential voltage current conveyors (DVCCs), two grounded capacitors and four resistors. The second circuit is composed of two DVCCs, one differential difference current conveyor (DDCC), two grounded capacitors and four grounded resistors. The proposed circuits can realize all the standard filter functions, namely, lowpass, bandpass, highpass, notch and allpass filters by the selections of different input voltage terminals. The proposed circuits offer the features of high input impedance, using only grounded capacitors and low active and passive sensitivities. Moreover, the x ports of the DVCCs (or DDCC) in the proposed circuits are connected directly to resistors. This design offers the feature of a direct incorporation of the parasitic resistance at the x terminal of the DVCC (DDCC), Rx, as a part of the main resistance
Effects of foliar applications of urea on apple trees
Typescript. Thesis (M.S.)--Iowa State College, 1952. Includes bibliography
Evaluation of innovative sprayed-concrete-lined tunnelling
The front-shunt tunnel was the first tunnel of the Terminal 5 project at Heathrow to be constructed, and was the first section of sprayed-concrete-lined (SCL) tunnel to be constructed using the method known as LaserShell. This innovation represented a significant deviation from the methods previously used in SCL construction. Therefore it was subjected to a careful examination before and during construction using sophisticated 3D numerical modelling and monitoring during construction. The paper presents typical results from surface settlement levelling, inclinometers and extensometers, pressure cells and tunnel lining displacement measurements, and comments on the performance of the methods and instruments used. The paper then presents the methodology and typical results of the numerical modelling, and shows that the predictions of displacements and stresses compared well with the field measurements. In terms of the control of ground deformations and structural safety the tunnel performed well
- …