Comparative design study of a diesel exhaust gas heat exchanger for truck applications with conventional and state of the art heat transfer enhancements

The exhaust gas of heavy duty diesel engines can provide an important heat source that may be used in a number of ways to provide additional power and improve overall engine efficiency. The sizing of a heat exchanger that can manage the heat load and still be of reasonable size and weight without excessive pressure drop is of significant importance especially for truck applications. This is the subject of the present work. To approach the problem, a total of five different configurations are investigated and a comparison of conventional and state of the art heat transfer enhancement technologies is included. Two groups of configurations are examined: (a) a classical shell and tube heat exchanger using staggered cross-flow tube bundles with smooth circular tubes, finned tubes and tubes with dimpled surfaces and (b) a cross-flow plate heat exchanger, initially with finned surfaces on the exhaust gas side and then with 10 ppi and 40 ppi metal foam material substituting for the fins. Calculations were performed, using established heat exchanger design methodologies and recently published data from the literature to size the aforementioned configurations. The solutions provided reduce the overall heat exchanger size, with the plate and fin type consisting of plain fins presenting the minimum pressure drop (up to 98% reduction compared to the other configurations), and the 40 ppi metal foam being the most compact in terms of size and weight. Durability of the solutions is another issue which will be examined in a future investigation. However, coupling of the exhaust heat exchanger after a particulate trap appears to be the most promising solution to avoid clogging from soot accumulation

A methodology for the capture and analysis of hybrid data: a case study of program debugging

No description supplie

Effects of EGR rate on performance and emissions of a diesel power generator fueled by B7

This paper analyses the impacts of the application of an exhaust gas recirculation (EGR) system on the performance and emissions of a stationary, direct-injection diesel engine operating with diesel oil containing 7% biodiesel (B7). Experiments were carried out in a 49-kW diesel power generator with the adapted EGR system, and engine performance and emissions were evaluated for different load and EGR settings. The results were compared with the engine operating with its original configuration without the EGR system, and revealed a reduction of peak cylinder pressure and fuel conversion efficiency, mainly at high engine loads. The use of EGR caused opposite effects on carbon dioxide (CO2), carbon monoxide (CO) and total hydrocarbons (THC) emissions, depending on load and EGR rate, showing an increase in most situations. The application of EGR consistently reduced oxides of nitrogen (NOX) emissions, reaching a maximum reduction close to 30%. In general, the use of EGR increased CO2, CO and THC emissions at high loads. The use of 7.5% EGR was found to be at an adequate rate to simultaneously reduce CO, THC and NOX emissions at low and moderate loads, without major penalties on CO2 emissions and engine performance