On the identification of Ti-Ta-Nb-oxides in “wiikites” from Karelia

Purpose. With respect to the nature of Ti-Ta-Nb-oxides, which are included in the mineral associations that have historically gone by the now outdated name of “wiikites”, there is no unanimity of opinion. The main difficulty in identifying them is associated with the complexity of their chemical composition, their metamict structure and the substantial changes in their initial mineral form due to the effects of natural weathering. The aim of this work is the development of methodology to identify Ti-Ta-Nb-oxides corresponding to the mineral formulas AB2O6 and A2B2O7. Methods. The methodology developed in the work includes two experimental approaches: 1) electron probe microanalysis of phases revealed through use of the SEM-BSE method. Based on the resulting data, a hypothesis about the nature of the Ti-Ta-Nb-oxides in a number of wiikite samples is proposed. 2) XRD analysis of those phases that are formed in the course of thermal annealing of samples from 200 to 1000°C. Based on the resulting data here, the previous hypotheses are either accepted or rejected for each sample. Findings. Using this methodology, three “wiikite” samples were analyzed (the experimental codes were Wk-2, Wk-3 and Wk-7). The Ti-Ta-Nb-oxides in two of these wiikites (Wk-2 and Wk-3) were preliminarily determined to be hydroxyyttropyrochlore and hydroxycalciobetafite, respectively. In the third sample (Wk-7), the Ti-Ta-Nb-oxide was classified as polycrase. The results of XRD phase analysis of the annealed samples were compatible with the primary hypotheses that hydroxycalciobetafite and polycrase were the initial minerals in “wiikites” 3 and 7, respectively. Originality. The paper considers the issue of the chemical conditions necessary for the recovery of the original Ti-Ta-Nb-oxide during recrystallization of the metamict structures. This is a problem that has not been substantively addressed in the literature. Also for the first time experimentally proved the existence of the polycrase in “wiikites”. Practical implications. Completed work expands our knowledge of the mineral composition of the granitic pegmatites of the Baltic shield and the possibility of their use both for research purposes and for needs of national economy.Мета. Розробка методології ідентифікації Ti-Ta-Nb-оксидів складного хімічного складу з метаміктною структурою, що відповідають мінеральним формулами АВ2О6 та А2В2О7. Методика. Для розробки методології ідентифікації у роботі використано два експериментальних підходи: 1) рентген-спектральний мікроаналіз фаз, виявлених методом скануючої електронної мікроскопії зразків у назад відображених електронах. На основі отриманих результатів висунута гіпотеза щодо природи Ti-Ta-Nb-оксидів. 2) рентген-дифракційний аналіз фаз, що утворюються в процесі термічного відпалу зразків від 200 до 1000°С. На основі отриманих результатів для кожного зразка первинна гіпотеза приймалася або відкидалася. Результати. З використанням даної методики були вивчені три зразки “віікітів” (шифри зразків: Wk-2, Wk-3 і Wk-7). Наявність Ti-Ta-Nb-оксидів попередньо визначено e двох зразках (Wk-2 і Wk-3) відповідно, як гідроксііттропірохлор та гідроксікальціобетафіт. У третьому зразку (Wk-7) Ti-Ta-Nb діагностований як полікраз. Результати рентген-дифракційного аналізу відпалених зразків підтвердили гіпотези про те, що початковими мінералами у Wk-3 і Wk-7 були гідроксікальціобетафіт і полікраз відповідно. Наукова новизна. Визначено хімічні умови, необхідні для утворення початкового Тi-Ta-Nb під час рекристалізації метаміктної структури, що раніше не розглядалось у відповідній тематичній науковій літературі. Вперше експериментально виявлено присутність у “віікітах” полікраза. Практична значимість. Отримані результати розширюють й доповнюють знання щодо мінерального складу гранітних пегматитів Балтійського щита та надають можливість їх використання в дослідницьких цілях і потребах народного господарства.Цель. Разработка методологии идентификации Ti-Ta-Nb-оксидов сложного химического состава с метамиктной структурой, соответствующих минеральным формулам АВ2О6 и А2В2О7. Методика. Для разработки методологии идентификации в работе использовано два экспериментальных подхода: 1) рентген-спектральный микроанализ фаз, выявленных методом сканирующей электронной микроскопии образцов в обратно отраженных электронах. На основе полученных результатов выдвинута гипотеза о природе Ti-Ta-Nb-оксидов. 2) рентген-дифракционный анализ фаз, образующихся в процессе термического отжига образцов от 200 до 1000°С. На основе полученных результатов для каждого образца первоначальная гипотеза принималась или отвергалась. Результаты. С использованием данной методики были изучены три образца “виикитов” (шифры образцов: Wk-2, Wk-3 и Wk-7). Наличие Ti-Ta-Nb-оксидов предварительно определено в двух образцах (Wk-2 и Wk-3) соответственно, как гидроксииттропирохлор и гидроксикальциобетафит. В третьем образце (Wk-7) Ti-Ta-Nb диагностирован как поликраз. Результаты рентген-дифракционного анализа отожженных образцов подтвердили гипотезы о том, что первоначальными минералами в Wk-3 и Wk-7 были гидроксикальциобетафит и поликраз соответственно. Научная новизна. Определены химические условия, необходимые для образования первоначального Тi-Ta-Nb во время рекристаллизации метамиктной структуры, что ранее не рассматривалось в соответствующих тематических научных литературе. Впервые экспериментально выявлено присутствие в “виикитах” поликраза. Практическая значимость. Полученные результаты расширяют и дополняют знания о минеральном составе гранитных пегматитов Балтийского щита и дают возможности их использования в исследовательских целях и нуждах народного хозяйства.The study was conducted using equipment of the Center of X-ray Diffraction Studies and the Center for Microscopy and Microanalysis of the Research Park at Saint Petersburg State University, as well as the analytical laboratory of OJSC MMC Norilsk Nickel in Saint Petersburg

Acromioclavicular Joint Fixation Using an Acroplate Combined With a Coracoclavicular Screw

Background: Appropriate treatment of acromioclavicular joint dislocation is controversial. Acroplate fixation is one of the most common treatment methods of acromioclavicular joint (ACJ) dislocation. Based on the risk of re-dislocation after Acroplate fixation, we assumed that combined fixation with an Acroplate and a coracoclavicular screw helps improve the outcome. Objectives: The main purpose of the current study was to compare the outcome of ACJ dislocation treated with an Acroplate alone and in combination with coracoclavicular screw. Patients and Methods: This study was carried out on 40 patients with ACJ dislocation types III to VI who were divided randomly into two equal groups: Acroplate group (P) and Acroplate in combination with coracoclavicular screw group (P + S). The screws were extracted 3-6 months postoperatively. The patients were followed for 1 year and Imatani’s score was calculated. Finally, the data were compared between the groups. Results: The mean Imatani’s score was significantly higher in P + S group (83.4 ± 14.1) than P group (81.2 ± 10.3) (P < 0.001). The mean duration of surgery was the same in the two groups (59.8 ± 9.4 minutes in group P V.s 64.3 ± 10.9 minutes in group P + S; P = 0.169). There were no cases of re-dislocation, degenerative changes and ossification and all patients returned to their previous jobs or sporting activities. Conclusions: Using a coracoclavicular screw combined with an Acroplate can improve the patients’ function after ACJ disruption without any significant increase in surgical duration. Authors recommend this technique in the fixation of ACJ dislocation

Pure and social disparities in distribution of dentists: a cross-sectional province-based study in Iran

During past decades, the number of dentists has continuously increased in Iran. Beside the quantity, the distribution of dentists affects the oral health status of population. The current study aimed to assess the pure and social disparities in distribution of dentists across the provinces in Iran in 2009. Data on provinces' characteristics, including population and social situation, were obtained from multiple sources. The disparity measures (including Gini coefficient, index of dissimilarity, Gaswirth index of disparity and relative index of inequality (RII)) and pairwise correlations were used to evaluate the pure and social disparities in the number of dentists in Iran. On average, there were 28 dentists per 100,000 population in the country. There were substantial pure disparities in the distribution of dentists across the provinces in Iran. The unadjusted and adjusted RII values were 3.82 and 2.13, respectively; indicating area social disparity in favor of people in better-off provinces. There were strong positive correlations between density of dentists and better social rank. It is suggested that the results of this study should be considered in conducting plans for redistribution of dentists in the country. In addition, further analyses are needed to explain these disparities

Simple and Safe Packing Method for High-Grade Liver Injuries

Background: Injury to the liver is a commonly encountered problem in trauma cases and is a frequent cause of morbidity and mortality. Because gauze packing is easy to use and has the potential for rapid hemorrhage control, it is the most commonly used method for patients with severe liver injuries, particularly those with coagulopathy. Objectives: In this study, OpSite sheets were used to make three-layer packs for decreasing the complication associated with removing gauze packing. Patients and Methods: Twenty male patients with grade IV or V liver injuries that required laparotomy were enrolled in the study. Ten patients were treated using conventional packing, while the other 10 were treated using the three-layer pack. In the case group, the liver was mobilized as much as possible. The three-layer pack was then placed at the site of liver damage and extended onto the liver surface, and the other pads were placed on top of this pad. After 72 h, reoperation was performed, the packs were removed, and the packs causing injury were recorded. Additionally, if rebleeding due to the adhesive bands of the pack was observed, the blood was suctioned and bleeding volume was measured. Data were analyzed using the Mann–Whitney test. Results: Patients in the case and control groups were similar in age and admission vital signs. During the second operation, the bleeding volumes measured in the case and control groups were 66 ± 27.01 mL and 152 ± 85.4 mL, respectively. There was some pad-induced damage after the removal of the pad in the control group. Conclusions: Our study has provided a simple and safe packing method for high-grade liver injuries

Effect of hydrogen peroxide on bovine serum albumin adsorption on Ti6Al4V alloy: A scanning Kelvin probe force microscopy study

Abstract Protein adsorption on the surface of implant materials greatly affects the performance of the implants, such as their stability as well as the release of metal ions from and the adhesion of cells to their surface. In addition, the production of extracellular H2O2 from the activation of inflammatory cells could interfere with protein–metal interactions and/or modify the conformation of adsorbed proteins. In this study, we utilised scanning Kelvin probe force microscopy (SKPFM) to visualise the impact of H2O2 on bovine serum albumin (BSA) adsorption on the positively polarised Ti6Al4V alloy in a phosphate-buffered saline (PBS) solution. We show that the negatively charged BSA adsorbs onto the surface of polished and anodically polarised Ti6Al4V in a dense layer with a continuous network-like morphology or cluster shape and reduces the variation in the total surface potential compared to that of blank Ti6Al4V. However, addition of H2O2 to the PBS solution interferes with the formation of the dense protein network, and only a thin and discontinuous protein layer adsorbs onto the surface of the Ti6Al4V alloy, lowering the total surface potential difference. The information presented in this work provides new insights into the adsorption distribution of proteins on metallic substrates in biomaterials field

Effect of substrate grain size on structural and corrosion properties of electrodeposited nickel layer protected with self-assembled film of stearic acid

In the present study, the impact of copper substrate grain size on the structure of the succeeding electrodeposited nickel film and its consequent corrosion resistance in 3.5% NaCl medium were evaluated before and after functionalization with stearic acid. Nickel layers were electrodeposited on two different copper sheets with average grain size of 12 and 25 \u3bcm, followed by deposition of stearic acid film through self-assembly. X-ray diffraction analysis of the electrodeposited nickel films revealed that the deposition of nickel film on the Cu substrate with small (12 \u3bcm) and large (25 \u3bcm) grains is predominantly governed by growth in the (220) and (111) planes, respectively. Both electrodeposited films initially exhibited a hydrophilic nature, with water-contact angles of 56\ub0 and <10\ub0, respectively. After functionalization with stearic acid, superhydrophobic films with contact angles of ~150\ub0 were obtained on both samples. In a 3.5% NaCl medium, the corrosion resistance of the nickel layer electrodeposited on the copper substrate with 25 \u3bcm grains was three times greater than that deposited on the copper substrate with 12 \u3bcm grains. After functionalization, the corrosion resistance of both films was greatly improved in both short and long immersion times in 3.5% NaCl medium

A Comparison Between Foley and Nelatone Urinary Catheters in Causing Urinary Tract Infection in Animal Models

Background: Urinary catheterization is one of the main measures used to treat and care for hospitalized patients. Several complications have been attributed to the presence of latex with routine Foley catheters. Therefore, some studies have recommended that Nelatone catheters be substituted for the ordinary Foley catheters to prevent these complications. Objectives: This study aimed to compare the rates of urinary tract infection (UTI) in rabbits catheterized either with Foley or with Nelatone catheters. Materials and Methods: A randomized controlled trial was conducted on 60 rabbits that were randomly assigned to three groups of twenty. The first group was catheterized using Nelatone catheter; the second group was catheterized using Foley catheter and the third group was studied without performing any catheterization. After seven days, urine samples were collected using suprapubic aspiration and were sent to the laboratory for culture. Descriptive statistics were calculated. Moreover, chi-square and Fisher’s exact tests were used for data analysis. Results: At the end of the study, four 4 cases in the Nelatone group and 12 cases in the Foley group presented with UTI (P = 0.01). No positive urine cultures were found in the control group. Conclusions: The Nelatone catheters, compared with the Foley ones, had a lower risk of UTI in the long term use. Verifying this claim by further studies can have an important role in reducing UTIs in patients using urinary catheters

Electrophysiological Assessment of Injury to the Infra-patellar Branch(es) of the Saphenous Nerve during Anterior Cruciate Ligament Reconstruction Using Medial Hamstring Auto-grafts: Vertical versus Oblique Harvest Site Incisions

Background: It was suggested that the direction of incision for medial hamstring tendons harvesting\n influences the incidence of injury to the infrapatellar branch of the saphenous nerve\n (IPBSN), a common complication following arthroscopically-assisted anterior cruciate\n ligament reconstruction (ACLR). Objectives: The main purpose of current study was to compare the incidence of IPBSN injury between\n vertical and oblique incisions utilizing electrophysiological evaluation. Patients and Methods: There were 60 patients underwent arthroscopically-assisted ACLR assigned to two equal\n vertical or oblique incision groups, randomly. One year postoperatively, the patients\n were electrophysiologically examined to detect whether IPBSN is injured. The Lysholm\n score was completed. The patients' satisfaction with surgical outcomes determined\n utilizing visual analogue scale (VAS). Finally, two groups were compared and the effect\n of IPBSN injury on function and satisfaction was investigated. Results: The incidence of IPBSN injury was higher in the vertical group (4 patients vs. 10\n patients), but the difference was not statistically significant. The mean of Lysholm and\n VAS scores were the same. Also, the mean of Lysholm score was the same in patients with\n and without IPBSN injury. However, patients without IPBSN injury were more satisfied\n (8.9 ± 9 vs. 7.4 ± 1.1; P < 0.001). Conclusions: IPBSN injury is a common complication following arthroscopically-assisted ACLR and, if\n not significant, oblique direction of the incision is associated with decreased\n incidence of the injury. IPBSN injury has no effect on the function but because of the\n disturbance with patients' satisfaction, authors believe the oblique incision is\n preferable to avoid the nerve injury during medial hamstring tendons harvesting

Pseudomonas aeruginosa infection among cystic fibrosis and ICU patients in the referral Children Medical Hospital in Tehran, Iran

Introduction. Pseudomonas aeruginosa is one of the important causes of hospital-acquired infections in Intensive Care Unit (ICU) and considered as a major determinant of morbidity and mortality in patients affected by cystic fibrosis (CF). The aim of this study was to investigate clonal diversity among randomly picked P. aeruginosa isolates of CF and the other hospitalized patients in ICU. Methods. Cultivation, identification, and antimicrobial suscep- tibility testing of P. aeruginosa isolates were performed using standard techniques. The genetic similarity of the strains was investigated by amplification of the Enterobacterial Repetitive Intergenic Consensus-polymerase chain reaction (ERIC-PCR) sequence. Results and discussion. Among 49 isolates, sixteen were isolated from 11 patients affected by CF and 33 came from an epidemiologi- cal investigation of 25 P. aeruginosa infected patients of ICU. Five clusters were generated for all isolates analyzed through ERIC-PCR genotyping. Two major clusters (B and C) were discovered in P. aer- uginosa isolates of ICU and CF patients during the whole period of this study. Fifteen unique antibiogram patterns obtained from all iso- lates and multi-resistant P. aeruginosa (MRPA) were identified in 23 isolates (47%). MRPA isolates were detected in all clusters (except A) while pan-resistant isolates were recovered only in cluster C. The high prevalence of related or identical isolates in CF and non-CF patients can be due to transmission of particular domi- nant clones in ICU ward. Therefore, enhanced infection-control may become necessary to prevent further spread of clonal strains