2,312 research outputs found
Gibbs free energy difference between the undercooled liquid and the beta-phase of a Ti-Cr alloy
The heat of fusion and the specific heats of the solid and liquid have been experimentally determined for a Ti60Cr40 alloy. The data are used to evaluate the Gibbs free energy difference, DELTA-G, between the liquid and the beta-phase as a function of temperature to verify a reported spontaneous vitrification (SV) of the beta-phase in Ti-Cr alloys. The results show that SV of an undistorted beta-phase in the Ti60Cr40 alloy at 873 K is not feasible because DELTA-G is positive at the temperature. However, DELTA-G may become negative with additional excess free energy to the beta-phase in the form of defects
Synergetic aerosol retrieval from SCIAMACHY and AATSR onboard ENVISAT
International audienceThe synergetic aerosol retrieval method SYNAER (Holzer-Popp et al., 2002a) has been extended to the use of ENVISAT measurements. It exploits the complementary information of a radiometer and a spectrometer onboard one satellite platform to extract aerosol optical depth (AOD) and speciation (as choice from a representative set of pre-defined mixtures of water-soluble, soot, mineral dust, and sea salt components). SYNAER consists of two retrieval steps. In the first step the radiometer is used to do accurate cloud screening, and subsequently to quantify the aerosol optical depth (AOD) at 550 nm and spectral surface brightness through a dark field technique. In the second step the spectrometer is applied to choose the most plausible aerosol type through a least square fit of the measured spectrum with simulated spectra using the AOD and surface brightness retrieved in the first step. This method was developed and a first case study evaluation against few (15) multi-spectral ground-based AERONET sun photometer observations was conducted with a sensor pair (ATSR-2 and GOME) onboard ERS-2. However, due to instrumental limitations the coverage of SYNAER/ERS-2 and the AERONET network in 1997/98 is very sparse and thus only few coincidences with AERONET were found. Therefore, SYNAER was transferred to similar sensors AATSR and SCIAMACHY onboard ENVISAT. While transferring to the new sensor pair a thorough evaluation of the synergetic methodology and its information content has been conducted, which led to significant improvements in the methodology: an update of the aerosol model, an improved cloud detection, and an enhanced dark field albedo characterization. This paper describes the information content analysis and these improvements in detail and presents first results of applying the SYNAER methodology to AATSR and SCIAMACHY
Decay of scalar turbulence revisited
We demonstrate that at long times the rate of passive scalar decay in a
turbulent, or simply chaotic, flow is dominated by regions (in real space or in
inverse space) where mixing is less efficient. We examine two situations. The
first is of a spatially homogeneous stationary turbulent flow with both viscous
and inertial scales present. It is shown that at large times scalar
fluctuations decay algebraically in time at all spatial scales (particularly in
the viscous range, where the velocity is smooth). The second example explains
chaotic stationary flow in a disk/pipe. The boundary region of the flow
controls the long-time decay, which is algebraic at some transient times, but
becomes exponential, with the decay rate dependent on the scalar diffusion
coefficient, at longer times.Comment: 4 pages, no figure
A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets
A comparative investigation of the effectiveness of a high power diode laser (HPDL) and a CO2 laser for the forming of thin section EN3 mild steel sheet has been conducted. The buckling mechanism was identified as the laser forming mechanism responsible for the induced bending. For both lasers it was found that the induced bending angles increased with an increasing number of irradiations and high laser powers, whilst decreasing as the traverse speed was increased. Also, it was apparent from the experimental results that the laser bending angle was only linearly proportional to the number of irradiations when the latter was small due to local material thickening along the bend edge with a high number of irradiations. Owing to the mild steel’s greater beam absorption at the HPDL wavelength, larger bending angles were induced when using the HPDL. However, under certain conditions the performance of the CO2 laser in terms of induced bending angle was seen to approach that of the HPDL. Nevertheless, similar results between the two lasers were only achieved with increasing irradiations, thus it was concluded that the efficacy of the HPDL was higher than that of the CO2 laser insofar as it was more efficient. From graphical results and the employment of an analytical procedure, the laser line energy range in which accurate control of the HPDL bending of the mild steel sheets could be exercised efficiently was found to be 53 J mm-1 < P/v < 78 J mm-1, whilst for the CO2 laser the range was 61 J mm-1 < P/v < 85 J mm-1
Site-Directed Insertion: Decision Problems, Maximality and Minimality
Site-directed insertion is an overlapping insertion operation that can be
viewed as analogous to the overlap assembly or chop operations that concatenate
strings by overlapping a suffix and a prefix of the argument strings. We
consider decision problems and language equations involving site-directed
insertion. By relying on the tools provided by semantic shuffle on trajectories
we show that one variable equations involving site-directed insertion and
regular constants can be solved. We consider also maximal and minimal variants
of the site-directed insertion operation
On Measuring Non-Recursive Trade-Offs
We investigate the phenomenon of non-recursive trade-offs between
descriptional systems in an abstract fashion. We aim at categorizing
non-recursive trade-offs by bounds on their growth rate, and show how to deduce
such bounds in general. We also identify criteria which, in the spirit of
abstract language theory, allow us to deduce non-recursive tradeoffs from
effective closure properties of language families on the one hand, and
differences in the decidability status of basic decision problems on the other.
We develop a qualitative classification of non-recursive trade-offs in order to
obtain a better understanding of this very fundamental behaviour of
descriptional systems
Universality and saturation of intermittency in passive scalar turbulence
The statistical properties of a scalar field advected by the non-intermittent
Navier-Stokes flow arising from a two-dimensional inverse energy cascade are
investigated. The universality properties of the scalar field are directly
probed by comparing the results obtained with two different types of injection
mechanisms. Scaling properties are shown to be universal, even though
anisotropies injected at large scales persist down to the smallest scales and
local isotropy is not fully restored. Scalar statistics is strongly
intermittent and scaling exponents saturate to a constant for sufficiently high
orders. This is observed also for the advection by a velocity field rapidly
changing in time, pointing to the genericity of the phenomenon. The persistence
of anisotropies and the saturation are both statistical signatures of the
ramp-and-cliff structures observed in the scalar field.Comment: 4 pages, 8 figure
Turbulent spectrum of the Earth's ozone field
The Total Ozone Mapping Spectrometer (TOMS) database is subjected to an
analysis in terms of the Karhunen-Loeve (KL) empirical eigenfunctions. The
concentration variance spectrum is transformed into a wavenumber spectrum, . In terms of wavenumber is shown to be in the
inverse cascade regime, in the enstrophy cascade regime with the
spectral {\it knee} at the wavenumber of barotropic instability.The spectrum is
related to known geophysical phenomena and shown to be consistent with physical
dimensional reasoning for the problem. The appropriate Reynolds number for the
phenomena is .Comment: RevTeX file, 4 pages, 4 postscript figures available upon request
from Richard Everson <[email protected]
- …