Observations on the Hydraulic Regime of the Ridge and Swale Topography of the Inner Virginia Shelf

The Virginia inner shelf is dominated by southwest-trending sand ridges. Wavelengths are 2 to 4 km; amplitudes are up to 10 m; crests can be traced for up to 10 cm, Nearshore ridges trend southwest into the shore face and merge with it at depths as shoal as 5 m. The ridges have been examined by bathymetric mapping, grab sampling, coring, seismic profiling, SCUBA diving, and current monitoring. They are hemi-cylindrical sand bodies of recent age, resting on a pre-recent substrate. In troughs a thin, medium- to coarse-gained, pebbly lag veneers the substrate. Crests consist of a better sorted, medium- to fine-grained sand, while the flank sands are well sorted and fine- to very fine-grained. The fair-weather hydraul1c regime has been assessed by means of a direct-readout, orthogonal, current meter system. Five, 12- or 24-hour bottom stations were monitored. Wave surge and long per1od, roast-wise, residual currents were generally sub-equal in intensity, ranging from 0 to 20 cm/sec. Four stations yielded records of weak currents that could not be readily related to ridge building. SCUBA dives indicate that main fair-weather bottom activity is the slow migrat1on of wave-generated ripples up to 5 cm high, obliquely shoreward across ridge crests. However, a station in the most landward trough recorded a current that appeared to be actively scouring the trough floor. During the station the wind built up from a calm to 25 knots from the northeast. Sea rose to 2 m, and began to break over the ridge seaward of the trough. A south trending bottom current of 20 cm/sec developed and continued despite the turn of the tide. Circumstantial evidence suggests that such strong south-trending currents dominate the inner shelf during storms, and are the ridge-building currents. Shortly after a storm, sand waves with a wavelength of 25 - 30 m and amplitudes of 1 - 2 m were observed on a ridge crest. Cores reveal cross-bedded horizons up to l m thick within ridge crests. Second-order ridges on the flanks of some major ridges are asymmetrical towards the main crest suggesting that during storms, south-trending bottom currents may diverge from trough axe and converge toward ridge crests

Analysis and design of a modular multilevel converter with trapezoidal modulation for medium and high voltage DC-DC transformers

Conventional dual active bridge topologies provide galvanic isolation and soft-switching over a reasonable operating range without dedicated resonant circuits. However, scaling the two-level dual active bridge to higher dc voltage levels is impeded by several challenges among which the high dv/dt stress on the coupling transformer insulation. Gating and thermal characteristics of series switch arrays add to the limitations. To avoid the use of standard bulky modular multilevel bridges, this paper analyzes an alternative modulation technique where staircase approximated trapezoidal voltage waveforms are produced; thus alleviating developed dv/dt stresses. Modular design is realized by the utilization of half-bridge chopper cells. Therefore, the analyzed converter is a modular multi-level converter operated in a new mode with no common-mode dc arm currents as well as reduced capacitor size, hence reduced cell footprint. Suitable switching patterns are developed and various design and operation aspects are studied. Soft switching characteristics will be shown to be comparable to those of the two-level dual active bridge. Experimental results from a scaled test rig validate the presented concept

Over The Radiophone : Please Let Me Talk To My Mammy

https://digitalcommons.library.umaine.edu/mmb-vp/3348/thumbnail.jp

Gas Sorption and Luminescence Properties of a Terbium(III)-Phosphine Oxide Coordination Material with Two-Dimensional Pore Topology

The structure, stability, gas sorption properties and luminescence behaviour of a new lanthanide-phosphine oxide coordination material are reported. The polymer PCM-15 is based on Tb(III) and tris(p-carboxylated) triphenylphosphine oxide and has a 5,5-connected net topology. It exhibits an infinite three-dimensional structure that incorporates an open, two-dimensional pore structure. The material is thermally robust and remains crystalline under high vacuum at 150 degrees C. When desolvated, the solid has a CO2 BET surface area of 1187 m(2) g(-1) and shows the highest reported uptake of both O-2 and H-2 at 77 K and 1 bar for a lanthanide-based coordination polymer. Isolated Tb(III) centres in the as-synthesized polymer exhibit moderate photoluminescence. However, upon removal of coordinated OH2 ligands, the luminescence intensity was found to approximately double; this process was reversible. Thus, the Tb(III) centre was used as a probe to detect directly the desolvation and resolvation of the polymer.Welch Foundation F-1738, F-1631National Science Foundation 0741973, CHE-0847763Chemistr

Beyond the hybrid library : libraries in a Web 2.0 world

Considers the development of social networking and the concept of Web 2.0. Looks at the implications for libraries and how traditional competences remain relevant. Explores what libraries are doing and must do to remain relevan

AC voltage sag-swell compensator based on unified non-inverting and inverting output voltage AC chopper

This paper proposes a unified AC chopper topology that can generate both non-inverting and inverting AC voltages. It is therefore suitable for compensating utility voltage sag-swell in domestic consumer and industry infeeds. The proposed converter is able to save on the passive device footprint and improve dynamic performance compared to other similar candidates. The topology derivation, operating principle and performance evaluation are analysed in this paper. Simulation results are presented to assess the proposed scheme with in-phase and out-phase AC voltages generated from a fixed grid input to compensate the voltage sag-swell disturbances in the utility

Reducing smoking in adolescents: cost-effectiveness results from the cluster randomized ASSIST (A Stop Smoking In Schools Trial)

Introduction: School-based smoking prevention programmes can be effective, but evidence on cost-effectiveness is lacking. We conducted a cost-effectiveness analysis of a school-based “peer-led” intervention.<p></p> Methods: We evaluated the ASSIST (A Stop Smoking In Schools Trial) programme in a cluster randomized controlled trial. The ASSIST programme trained students to act as peer supporters during informal interactions to encourage their peers not to smoke. Fifty-nine secondary schools in England and Wales were randomized to receive the ASSIST programme or usual smoking education. Ten thousand seven hundred and thirty students aged 12–13 years attended participating schools. Previous work has demonstrated that the ASSIST programme achieved a 2.1% (95% CI = 0%–4.2%) reduction in smoking prevalence. We evaluated the public sector cost, prevalence of weekly smoking, and cost per additional student not smoking at 24 months.<p></p> Results: The ASSIST programme cost of £32 (95% CI = £29.70–£33.80) per student. The incremental cost per student not smoking at 2 years was £1,500 (95% CI = £669–£9,947). Students in intervention schools were less likely to believe that they would be a smoker at age 16 years (odds ratio [OR] = 0.80; 95% CI = 0.66–0.96).<p></p> Conclusions: A peer-led intervention reduced smoking among adolescents at a modest cost. The intervention is cost-effective under realistic assumptions regarding the extent to which reductions in adolescent smoking lead to lower smoking prevalence and/or earlier smoking cessation in adulthood. The annual cost of extending the intervention to Year 8 students in all U.K. schools would be in the region of £38 million and could result in 20,400 fewer adolescent smokers.<p></p&gt

Space-Time Clustering and Correlations of Major Earthquakes

Earthquake occurrence in nature is thought to result from correlated elastic stresses, leading to clustering in space and time. We show that occurrence of major earthquakes in California correlates with time intervals when fluctuations in small earthquakes are suppressed relative to the long term average. We estimate a probability of less than 1% that this coincidence is due to random clustering.Comment: 5 pages, 3 figures. Submitted to PR

Single-stage ac–dc buck–boost converter for medium-voltage high-power applications

This study proposes three topologies based on single-stage three-phase ac-dc buck-boost converters suitable for medium-voltage high-power applications. The first two topologies are based on a dual three-phase buck-boost converter, with a three-winding phase-shifted transformer to achieve sinusoidal input currents, with relatively small ac filters. The limitation of these two topologies is the switching devices are exposed either to a high voltage beyond that tolerable by a single device. The third topology is based on three single-phase buck-boost converters; with their dc output terminals connected in series to generate high voltage. By using this approach, voltage stresses on the switching devices are greatly reduced, and sinusoidal input currents with nearly unity power factor is achieved over the entire operating range when using small ac filters. Analysis, PSCAD/EMTDC simulations and experimentation are used to assess the feasibility of the proposed topologies during normal operation. Major findings of this study are discussed and summarised as a comparison between the three topologies