Water disinfection with geopolymer–bentonite composite foam containing silver nanoparticles

Abstract Geopolymers resemble conventional ceramics but can be manufactured at near-ambient temperatures. In this work, geopolymer–bentonite composite foam with silver nanoparticles was prepared and applied for water disinfection, inspired by point-of-use ceramic water filters. The inactivation efficiency against Escherichia coli and intestinal enterococci bacteria was found to be promising (0.6–2.4 and 0.3–1.4 log₁₀ reductions, respectively) for ∼1 d. However, the inactivation efficiency against somatic coliphage viruses was poor (<0.05 log₁₀). The geopolymer matrix did not alter the chemical water quality. Thus, the pH and the concentrations of Ag, Si, Al, and Na remained in compliance with drinking water guideline values, and the foam showed no physical disintegration. These results provide preliminary proof of concept of the suitability of geopolymer foam composites for point-of-use water disinfection

Surface water intrusion, land use impacts, and bacterial community composition in shallow groundwater wells supplying potable water in sparsely populated areas of a boreal region

Abstract Rural communities often rely on groundwater for potable water supply. In this study, untreated groundwater samples from 28 shallow groundwater wells in Finland (<10 m deep and mostly supplying untreated groundwater to <200 users in rural areas) were assessed for physicochemical water quality, stable water isotopes, microbial water quality indicators, host-specific microbial source tracking (MST) markers, and bacterial community composition, activity, and diversity (using amplicon sequencing of the 16S rRNA gene and 16S rRNA). Indications of surface water intrusion were identified in five wells, and these indications were found to be negatively correlated, overall, with bacterial alpha diversity (based on amplicon sequencing of the 16S rRNA gene). High levels of turbidity, heterotrophs, and iron compromised water quality in two wells, with values up to 2.98 nephelometric turbidity units (NTU), 16,000 CFU/ml, and 2,300 μg/liter, respectively. Coliform bacteria and general fecal indicator Bacteroidales bacteria (GenBac3) were detected in 14 and 10 wells, respectively (albeit mostly at low levels), and correlations were identified between microbial, physicochemical, and environmental parameters, which may indicate impacts from nearby land use (e.g., agriculture, surface water, road salt used for deicing). Our results show that although water quality was generally adequate in most of the studied wells, the continued safe use of these wells should not be taken for granted. Importance: Standard physicochemical water quality analyses and microbial indicator analyses leave much of the (largely uncultured) complexity of groundwater microbial communities unexplored. This study combined these standard methods with additional analyses of stable water isotopes, bacterial community data, and environmental data about the surrounding areas to investigate the associations between physicochemical and microbial properties of 28 shallow groundwater wells in Finland. We detected impaired groundwater quality in some wells, identified potential land use impacts, and revealed indications of surface water intrusion which were negatively correlated with bacterial alpha diversity. The potential influence of surface water intrusion on groundwater wells and their bacterial communities is of particular interest and warrants further investigation because surface water intrusion has previously been linked to groundwater contamination, which is the primary cause of waterborne outbreaks in the Nordic region and one of the major causes in the United States and Canada

Monitoring groundwater quality with real-time data, stable water isotopes, and microbial community analysis:a comparison with conventional methods

Abstract Groundwater provides much of the world's potable water. Nevertheless, groundwater quality monitoring programmes often rely on a sporadic, slow, and narrowly focused combination of periodic manual sampling and laboratory analyses, such that some water quality deficiencies go undetected, or are detected too late to prevent adverse consequences. In an effort to address this shortcoming, we conducted enhanced monitoring of untreated groundwater quality over 12 months (February 2019–February 2020) in four shallow wells supplying potable water in Finland. We supplemented periodic manual sampling and laboratory analyses with (i) real-time online monitoring of physicochemical and hydrological parameters, (ii) analysis of stable water isotopes from groundwater and nearby surface waters, and (iii) microbial community analysis of groundwater via amplicon sequencing of the 16S rRNA gene and 16S rRNA. We also developed an early warning system (EWS) for detecting water quality anomalies by automating real-time online monitoring data collection, transfer, and analysis – using electrical conductivity (EC) and turbidity as indirect water quality indicators. Real-time online monitoring measurements were largely in fair agreement with periodic manual measurements, demonstrating their usefulness for monitoring water quality; and the findings of conventional monitoring, stable water isotopes, and microbial community analysis revealed indications of surface water intrusion and faecal contamination at some of the studied sites. With further advances in technology and affordability expected into the future, the supplementary methods used here could be more widely implemented to enhance groundwater quality monitoring – by contributing new insights and/or corroborating the findings of conventional analyses