Experimental Studies on Slurry Based Thermal Barrier Coatings

Thermal barrier coatings were introduced to reduce operating temperatures and thermal stresses in structures and machine components across a wide range of industries and applications. The focus of the present study is to develop a new, relatively simple and low cost technique of manufacturing thermal barrier coatings based upon the slurry spray method. The challenge of this work is to make this technique comparable, in terms of the quality of the coating, to existing manufacturing methods, which are often expensive and inapplicable to coat large or curved surfaces. This paper describes the developed technique and selected results of thermo-mechanical testing of fabricated coatings including functionally graded coatings

A Scanned Perturbation Technique For Imaging Electromagnetic Standing Wave Patterns of Microwave Cavities

We have developed a method to measure the electric field standing wave distributions in a microwave resonator using a scanned perturbation technique. Fast and reliable solutions to the Helmholtz equation (and to the Schrodinger equation for two dimensional systems) with arbitrarily-shaped boundaries are obtained. We use a pin perturbation to image primarily the microwave electric field amplitude, and we demonstrate the ability to image broken time-reversal symmetry standing wave patterns produced with a magnetized ferrite in the cavity. The whole cavity, including areas very close to the walls, can be imaged using this technique with high spatial resolution over a broad range of frequencies.Comment: To be published in Review of Scientific Instruments,September, 199

LIFTED CODES OVER FINITE CHAIN RINGS

In this paper, we study lifted codes over finite chain rings. We use γ-adic codes over a formal power series ring to study codes over finite chain rings

Gaseous, PM2.5 Mass, and Speciated Emission Factors from Laboratory Chamber Peat Combustion

Peat fuels representing four biomes of boreal (western Russia and Siberia), temperate (northern Alaska, USA), subtropical (northern and southern Florida, USA), and tropical (Borneo, Malaysia) regions were burned in a laboratory chamber to determine gas and particle emission factors (EFs). Tests with 25 % fuel moisture were conducted with predominant smoldering combustion conditions (average modified combustion efficiency (MCE) =0.82+/-0.08). Average fuel-based EFCO2 (carbon dioxide) are highest (1400 +/- 38 g kg(-1)) and lowest (1073 +/- 63 g kg(-1)) for the Alaskan and Russian peats, respectively. EFCO (carbon monoxide) and EFCH4 (methane) are similar to 12 %15 % and similar to 0.3 %0.9 % of EFCO2, in the range of 157171 and 310 g kg(-1), respectively. EFs for nitrogen species are at the same magnitude as EFCH4, with an average of 5.6 +/- 4.8 and 4.7 +/- 3.1 g kg(-1) for EFNH3 (ammonia) and EFHCN (hydrogen cyanide); 1.9+/-1.1 g kg(-1) for EFNOx (nitrogen oxides); and 2.4+/-1.4 and 2.0 +/- 0.7 g kg(-1) for EFNOy (total reactive nitrogen) and EFN2O (nitrous oxide). An oxidation flow reactor (OFR) was used to simulate atmospheric aging times of similar to 2 and similar to 7 d to compare fresh (upstream) and aged (downstream) emissions. Filter-based EFPM2.5 varied by \u3e 4-fold (1461 g kg(-1)) without appreciable changes between fresh and aged emissions. The majority of EFPM2.5 consists of EFOC (organic carbon), with EFOC / EFPM2.5 ratios in the range of 52 %98 % for fresh emissions and similar to 14 %23 % degradation after aging. Reductions of EFOC (similar to 79 g kg(-1)) after aging are most apparent for boreal peats, with the largest degradation in low-temperature OC1 that evolves at \u3c 140 degrees C, indicating the loss of high-vapor-pressure semivolatile organic compounds upon aging. The highest EFLevoglucosan is found for Russian peat (similar to 16 g kg(-1)), with similar to 35 %50 % degradation after aging. EFs for water-soluble OC (EFWSOC) account for similar to 20 %62 % of fresh EFOC. The majority (\u3e 95 %) of the total emitted carbon is in the gas phase, with 54 %75 % CO2, followed by 8 %30 % CO. Nitrogen in the measured species explains 24 %52 % of the consumed fuel nitrogen, with an average of 35 +/- 11 %, consistent with past studies that report similar to 1/3 to 2/3 of the fuel nitrogen measured in biomass smoke. The majority (\u3e 99 %) of the total emitted nitrogen is in the gas phase, with an average of 16.7 % as NH3 and 9.5 % as HCN center dot N2O and NOy constituted 5.7 % and 2.9 % of consumed fuel nitrogen. EFs from this study can be used to refine current emission inventories

Seasonal variations of anhydrosugars in PM2.5 in the Pearl River Delta Region, China

Anhydrosugars including levoglucosan and mannosan are the most effective organic tracers for biomass burning aerosol in the atmosphere. In this study, to investigate the contribution of biomass burning emissions to the aerosol burden in the Pearl River Delta (PRD) region, China, 24-hour integrated PM2.5 samples were collected simultaneously at four locations, (i) Guangzhou (GZ), (ii) Zhaoqing (ZQ) in Guangdong province, (iii) Hok Tsui (HT) and (iv) Hong Kong Polytechnic University (PU) in Hong Kong, in four seasons between 2006 and 2007. Levoglucosan and mannosan, together with water-soluble inorganic ions and water-soluble organic carbon (WSOC), were determined to elucidate the seasonal and spatial variations in biomass burning contributions. The concentrations of levoglucosan and mannosan were on average 82.4±123 and 5.8±8.6 ng m−3, respectively. The WSOC concentrations ranged from 0.2 to 9.4 µg m−3, with an average of 2.1±1.6 µg m−3. The relative contributions of biomass burning emissions to OC were 33% in QZ, 12% in GZ, 4% at PU and 5% at HT, respectively, estimated by the measured levoglucosan to organic carbon ratio (LG/OC) relative to literature-derived LG/OC values. The contributions from biomass burning emissions were in general 1.7–2.8 times higher in winter than those in other seasons. Further, it was inferred from diagnostic tracer ratios that a significant fraction of biomass burning emissions was derived from burning of hard wood and likely also from field burning of agricultural residues, such as rice straw, in the PRD region. Our results highlight the contributions from biomass/biofuel burning activities on the regional aerosol budget in South China

Optimization Based Rate Control for Multicast with Network Coding

Recent advances in network coding have shown great potential for efficient information multicasting in communication networks, in terms of both network throughput and network management. In this paper, we address the problem of rate control at end-systems for network coding based multicast flows. We develop two adaptive rate control algorithms for the networks with given coding subgraphs and without given coding subgraphs, respectively. With random network coding, both algorithms can be implemented in a distributed manner, and work at transport layer to adjust source rates and at network layer to carry out network coding. We prove that the proposed algorithms converge to the globally optimal solutions for intrasession network coding. Some related issues are discussed, and numerical examples are provided to complement our theoretical analysis

Studi Kasus Terhadap Pelaksanaan Basement 5 Lantai Di Wilayah Surabaya Barat

Pembuatan basement pada bangunan bertingkat saat ini sangat banyak dilakukan untuk dijadikan lahan parkir. Basement yang akan dibuat memiliki kedalaman dan kondisi lapangan yang berbeda-beda, sehingga dibutuhkan metode yang berbeda-beda pula dalam pelaksanaannya. Skripsi ini menganalisa tentang metode pelaksanaan dalam pembuatan basement 5 lantai di wilayah Surabaya Barat. Metode untuk pelaksanaan basement tersebut ada 2, yaitu bottom-up dan top-down. Lalu dilakukan analisa data berupa studi literatur dari referensi dan data proyek, kemudian dilakukan pengecekan kestabilan dinding penahan tanah yang dipakai menggunakan program PLAXIS. Pemilihan alat-alat berat yang akan digunakan pada proyek juga disesuaikan dengan metode yang dipilih. Dari hasil studi literatur dan analisa menggunakan program PLAXIS, metode bottom-up harus melakukan pemasangan ground anchor untuk membantu kestabilan dinding penahan tanah. Tetapi dengan dilakukannya pemasangan ground anchor, hal tersebut bisa membahayakan bangunan sekitar proyek. Oleh karena itu metode top-down merupakan metode yang tepat untuk diaplikasikan dalam pelaksanaan basement, karena top-down memenuhi syarat kestabilan dinding penahan tanah dan aman dalam pelaksanaannya