24,529 research outputs found
Temperature effect on space charge dynamics in XLPE insulation
This paper reports on space charge evolution in crosslinked polyethylene (XLPE) planar samples approximately 1.20 mm thick subjected to electric stress level of 30 kVdc/mm under four temperature 25 oC, 50 oC, 70 oC and 90 oC for 24 hours. Space charge profiles in both as-received and degassed samples were measured using the laser induced pressure pulse (LIPP) technique. The dc threshold stresses at which space charge initiates are greatly affected by testing temperatures. The results suggest that testing temperature has numerous effects on space charge dynamics such as enhancement of ionic dissociation of polar crosslinked by-products, charge injection, charge mobility and electrical conductivity. Space charge distributions of very different nature were seen at lower temperatures when comparing the results of as-received samples with degassed samples. However at higher temperature, the space charge distribution took the same form, although of lower concentration in degassed samples. Space charge distributions are dominated by positive charge when tested at high temperatures regardless of sample treatment and positive charge propagation enhances as testing temperature increases. This can be a major cause of concern as positive charge propagation has been reported to be related to insulation breakdown
The effect of degassing on morphology and space charge
It is believed that space charge buildup in cross-linked polyethylene (XLPE) insulation is the main cause for premature failure of underground power cables. The space charge activities in XLPE depend on many factors such as additives, material treatment, ambient temperature, insulator/electrode interface, etc. Degassing is one of the material treatment process commonly employ in cable manufacturing to improve insulation performance. In this paper, investigation on the effect of degassing period has on the morphology and space charge was carried out. Planar XLPE samples of the same composite were subjected to different degassing time. It is discovered that apart from removing volatile by-products, degassing also anneal XLPE material; changing the morphology as a result
Recommended from our members
A micro-electro-mechanical-system-based thermal shear-stress sensor with self-frequency compensation
By applying the micro-electro-mechanical-system (MEMS) fabrication technology, we developed a micro-thermal sensor to measure surface shear stress. The heat transfer from a polysilicon heater depends on the normal velocity gradient and thus provides the surface shear stress. However, the sensitivity of the shear-stress measurements in air is less than desirable due to the low heat capacity of air. A unique feature of this micro-sensor is that the heating element, a film 1 µm thick, is separated from the substrate by a vacuum cavity 2 µm thick. The vacuum cavity prevents the conduction of heat to the substrate and therefore improves the sensitivity by an order of magnitude. Owing to the low thermal inertia of the miniature sensing element, this shear-stress micro-sensor can provide instantaneous measurements of small-scale turbulence. Furthermore, MEMS technology allows us make multiple sensors on a single chip so that we can perform distributed measurements. In this study, we use multiple polysilicon sensor elements to improve the dynamic performance of the sensor itself. It is demonstrated that the frequency-response range of a constant-current sensor can be extended from the order of 100 Hz to 100 kHz
Semimetalic graphene in a modulated electric potential
The -electronic structure of graphene in the presence of a modulated
electric potential is investigated by the tight-binding model. The low-energy
electronic properties are strongly affected by the period and field strength.
Such a field could modify the energy dispersions, destroy state degeneracy, and
induce band-edge states. It should be noted that a modulated electric potential
could make semiconducting graphene semimetallic, and that the onset period of
such a transition relies on the field strength. There exist infinite
Fermi-momentum states in sharply contrast with two crossing points (Dirac
points) for graphene without external fields. The finite density of states
(DOS) at the Fermi level means that there are free carriers, and, at the same
time, the low DOS spectrum exhibits many prominent peaks, mainly owing to the
band-edge states.Comment: 12pages, 5 figure
Macro aerodynamic devices controlled by micro systems
Micro-ElectroMechanical-Systems (MEMS) have emerged as a major enabling technology across the engineering disciplines. In this study, the possibility of applying MEMS to the aerodynamic field was explored. We have demonstrated that microtransducers can be used to control the motion of a delta wing in a wind tunnel and can even maneuver a scaled aircraft in flight tests. The main advantage of using micro actuators to replace the traditional control surface is the significant reduction of radar cross-sections. At a high angle of attack, a large portion of the suction loading on a delta wing is contributed by the leading edge separation vortices which originate from thin boundary layers at the leading edge. We used microactuators with a thickness comparable to that of the boundary layer in order to alter the separation process and thus achieved control of the global motion by minute perturbations
Efficient out-coupling and beaming of Tamm optical states via surface plasmon polariton excitation
We present evidence of optical Tamm states to surface plasmon polariton (SPP) coupling. We experimentally demonstrate that for a Bragg stack with a thin metal layer on the surface, hybrid Tamm-SPP modes may be excited when a grating on the air-metal interface is introduced. Out-coupling via the grating to free space propagation is shown to enhance the transmission as well as the directionality and polarization selection for the transmitted beam. We suggest that this system will be useful on those devices, where a metallic electrical contact as well as beaming and polarization control is needed
Ab-initio calculation of all-optical time-resolved calorimetry of nanosized systems: Evidence of nanosecond-decoupling of electron and phonon temperatures
The thermal dynamics induced by ultrashort laser pulses in nanoscale systems,
i.e. all-optical time-resolved nanocalorimetry is theoretically investigated
from 300 to 1.5 K. We report ab-initio calculations describing the temperature
dependence of the electron-phonon interactions for Cu nanodisks supported on
Si. The electrons and phonons temperatures are found to decouple on the ns time
scale at 10 K, which is two orders of magnitude in excess with respect to that
found for standard low-temperature transport experiments. By accounting for the
physics behind our results we suggest an alternative route for overhauling the
present knowledge of the electron-phonon decoupling mechanism in nanoscale
systems by replacing the mK temperature requirements of conventional
experiments with experiments in the time-domain.Comment: 5 pages, 3 figures. Accepted on Physical Review B
- …