617 research outputs found
Diagnostic development through the decades (mostly a Los Alamos perspective)
Author Institution: National Security Technologies, LLCSlides presented at the 2014 Photonic Doppler Velocimetry (PDV) Workshop Hosted by National Security Technologies, LLC, and the University of Nevada Las Vegas, June 24-26, 2014, Las Vegas, Nevada
Agricultural scene understanding, volume 1
There are no author-identified significant results in this report
High-pressure melt curve of shock-compressed tin measured using pyrometry and reflectance techniques
We have developed a new technique to measure the melt curve of a shocked metal sample and have used it to measure the high-pressure solid-liquid phase boundary of tin from 10 to 30 GPa and 1000 to 1800 K. Tin was shock compressed by plate impact using a single-stage powder gun, and we made accurate, time-resolved radiance, reflectance, and velocimetry measurements at the interface of the tin sample and a lithium fluoride window. From these measurements, we determined temperature and pressure at the interface vs time. We then converted these data to temperature vs pressure curves and plotted them on the tin phase diagram. The tin sample was initially shocked into the high-pressure solid γ phase, and a subsequent release wave originating from the back of the impactor lowered the pressure at the interface along a constant entropy path (release isentrope). When the release isentrope reaches the solid-liquid phase boundary, melt begins and the isentrope follows the phase boundary to low pressure. The onset of melt is identified by a significant change in the slope of the temperature-pressure release isentrope. Following the onset of melt, we obtain a continuous and highly accurate melt curve measurement. The technique allows a measurement along the melt curve with a single radiance and reflectance experiment. The measured temperature data are compared to the published equation of state calculations. Our data agree well with some but not all of the published melt curve calculations, demonstrating that this technique has sufficient accuracy to assess the validity of a given equation of state model
Recommended from our members
Suitability of Magnesium Oxide as a Visar Window
Impedance matching of a velocity interferometer for any reflector (VISAR) window to a material under study helps simplify a shock experiment by effectively allowing one to measure an in situ particle velocity. The shock impedance of magnesium oxide (MgO) falls roughly midway between those of sapphire and LiF, two of the most frequently used VISAR window materials. A series of symmetric impact experiments was performed to characterize the suitability of single crystal, (100) oriented magnesium oxide as a VISAR window material. These experiments yielded good results and show the viability of MgO as a VISAR window up to 23 GPa. Results were used to determine window correction factors and, subsequently, to estimate the pressure induced change in index of refraction. In many of the shots in this work we exceeded the Hugoniot elastic limit (HEL) of MgO, and both elastic and plastic waves are evident in the velocity profiles. The presence of both waves within the VISAR window complicates the typical VISAR window correction analysis. Preliminary analysis of the elastic and plastic contributions to the window correction is presented
Melting of tantalum at high pressure determined by angle dispersive x-ray diffraction in a double-sided laser-heated diamond-anvil cell
The high pressure and high temperature phase diagram of Ta has been studied
in a laser-heated diamond-anvil cell (DAC) using x-ray diffraction measurements
up to 52 GPa and 3800 K. The melting was observed at nine different pressures,
being the melting temperature in good agreement with previous laser-heated DAC
experiments, but in contradiction with several theoretical calculations and
previous piston-cylinder apparatus experiments. A small slope for the melting
curve of Ta is estimated (dTm/dP = 24 K/GPa at 1 bar) and a possible
explanation for this behaviour is given. Finally, a P-V-T equation of states is
obtained, being the temperature dependence of the thermal expansion coefficient
and the bulk modulus estimated.Comment: 31 pages, 8 figures, to appear in J.Phys.:Cond.Matte
An amphitropic cAMP-binding protein in yeast mitochondria
ABSTRACT: We describe the first example of a mitochondrial protein with a covalently attached phos-phatidylinositol moiety acting as a membrane anchor. The protein can be metabolically labeled with both stearic acid and inositol. The stearic acid label is removed by phospholipase D whereupon the protein with the retained inositol label is released from the membrane. This protein is a cAMP receptor of the yeast Saccharomyces cereuisiae and tightly associated with the inner mitochondrial membrane. However, it is converted into a soluble form during incubation of isolated mitochondria with Ca2+ and phospholipid (or lipid derivatives). This transition requires the action of a proteinaceous, N-ethylmaleimide-sensitive component of the intermembrane space and is accompanied by a decrease in the lipophilicity of the cAMP receptor. We propose that the component of the intermembrane space triggers the amphitropic behavior of the mitochondrial lipid-modified CAMP-binding protein through a phospholipase activity. Only in recent years specific fatty acids have been recog-nized to play important roles in the association of proteins with membranes. Both noncovalent and covalent interactions be-tween fatty acids and proteins have been reported. Among the latter are GTP-binding proteins (Molenaar et al., 1988)
Recommended from our members
Dynamic deformation of advanced materials
This is the final report of a three-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The objective of this project was to provide high-quality experimental measurements on composite materials and to develop computational models describing the deformation response of these materials. Specifically, the authors studied the influence of strain rate and shock loading on the deformation and fracture response of a 6061-T6 Al-50 vol.% Al{sub 2}O{sub 3} continuous fiber-reinforced composite as a function of composite orientation. The stress-strain response was found to vary substantially as a function of loading orientation with the quasi-static yield changing from nominally 300 MPa transverse to the fibers to {approximately}1,000 MPa parallel to the fibers. Transverse VISAR wave profile and spall measurements revealed a small, well-defined elastic precursor followed by a reasonably sharp shock rise. The failure response of the composite transverse to the fibers, under both uniaxial stress (quasi-static and dynamic) and uniaxial strain loading, displays a protracted but substantial load drop after yield followed by continued degradation in load carrying capacity. Lack of ideal parallel fiber construction leads to systematic bending failure of the alumina fibers through the sample under uniaxial stress and slow spallation kinetics as various fibers fail and pull out of the matrix across the spall plane
Announcing the Minderoo - Monaco Commission on Plastics and Human Health.
© The Author(s), 2022. This article is distributed under the terms of the Creative Commons Attribution License. The definitive version was published in Landrigan, P., Raps, H., Symeonides, C., Chiles, T., Cropper, M., Enck, J., Hahn, M., Hixson, R., Kumar, P., Mustapha, A., Park, Y., Spring, M., Stegeman, J., Thompson, R., Wang, Z., Wolff, M., Yousuf, A., & Dunlop, S. Announcing the Minderoo – Monaco Commission on Plastics and Human Health. Annals of Global Health, 88(1), (2022): 73, https://doi.org/10.5334/aogh.3916.Plastic is the signature material of our age. In the 75 years since large-scale production began in the aftermath of World War II, plastic has transformed our world, supported many of the most significant advances of modern civilization, and enabled breakthroughs in virtually every field of human endeavor. But plastic also poses great and growing dangers to human health and the environment, harms that fall disproportionately on the world’s poorest and most vulnerable populations. The extent and magnitude of these dangers are only beginning to be understood.The funding is from the Minderoo Foundation, the Centre Scientifique de Monaco, and the Prince Albert II of Monaco Foundation
First, do no harm: time for a systems approach to address the problem of health-care-derived pharmaceutical pollution.
- …