Evolution of prokaryotic SPFH proteins

BACKGROUND: The SPFH protein superfamily is a diverse family of proteins whose eukaryotic members are involved in the scaffolding of detergent-resistant microdomains. Recently the origin of the SPFH proteins has been questioned. Instead, convergent evolution has been proposed. However, an independent, convergent evolution of three large prokaryotic and three eukaryotic families is highly unlikely, especially when other mechanisms such as lateral gene transfer which could also explain their distribution pattern have not yet been considered.To gain better insight into this very diverse protein family, we have analyzed the genomes of 497 microorganisms and investigated the pattern of occurrence as well as the genomic vicinity of the prokaryotic SPFH members. RESULTS: According to sequence and operon structure, a clear division into 12 subfamilies was evident. Three subfamilies (SPFH1, SPFH2 and SPFH5) show a conserved operon structure and two additional subfamilies are linked to those three through functional aspects (SPFH1, SPFH3, SPFH4: interaction with FtsH protease). Therefore these subgroups most likely share common ancestry. The complex pattern of occurrence among the different phyla is indicative of lateral gene transfer. Organisms that do not possess a single SPFH protein are almost exclusively endosymbionts or endoparasites. CONCLUSION: The conserved operon structure and functional similarities suggest that at least 5 subfamilies that encompass almost 75% of all prokaryotic SPFH members share a common origin. Their similarity to the different eukaryotic SPFH families, as well as functional similarities, suggests that the eukaryotic SPFH families originated from different prokaryotic SPFH families rather than one. This explains the difficulties in obtaining a consistent phylogenetic tree of the eukaryotic SPFH members. Phylogenetic evidence points towards lateral gene transfer as one source of the very diverse patterns of occurrence in bacterial species

Optical Properties of Pentacene and Perfluoropentacene Thin Films

The optical properties of pentacene (PEN) and perfluoropentacene(PFP) thin films on various SiO2 substrates were studied using variable angle spectroscopic ellipsometry. Structural characterization was performed using X-ray reflectivity and atomic force microscopy. A uniaxial model with the optic axis normal to the sample surface was used to analyze the ellipsometry data. A Strong optical anisotropy was observed and enabled the direction of the transition dipole of the absorption bands to be determined. Furthermore, comparison of the optical constants of PEN and PFP thin films with the absorption spectra of the monomers in solution shows significant changes due to the crystalline environment. Relative to the monomer spectrum the HOMO-LUMO transition observed in PEN (PFP) thin film is reduced by 210 meV (280 meV). Surprisingly, a second absorption band in the PFP thin film shows a slight blueshift (40 meV) compared to the spectrum of the monomer with its transition dipole perpendicular to that of the first absorption band.Comment: 6 pages, 6 figures, submitted to J. Chem. Phy

Elucidating Structure Formation in Highly Oriented Triple Cation Perovskite Films

Metal halide perovskites are an emerging class of crystalline semiconductors of great interest for application in optoelectronics. Their properties are dictated not only by their composition, but also by their crystalline structure and microstructure. While significant efforts are dedicated to the development of strategies for microstructural control, significantly less is known about the processes that govern the formation of their crystalline structure in thin films, in particular in the context of crystalline orientation. This work investigates the formation of highly oriented triple cation perovskite films fabricated by utilizing a range of alcohols as an antisolvent. Examining the film formation by in situ grazing-incidence wide-angle X-ray scattering reveals the presence of a short-lived highly oriented crystalline intermediate, which is identified as FAI-PbI2-xDMSO. The intermediate phase templates the crystallization of the perovskite layer, resulting in highly oriented perovskite layers. The formation of this dimethylsulfoxide (DMSO) containing intermediate is triggered by the selective removal of N,N-dimethylformamide (DMF) when alcohols are used as an antisolvent, consequently leading to differing degrees of orientation depending on the antisolvent properties. Finally, this work demonstrates that photovoltaic devices fabricated from the highly oriented films, are superior to those with a random polycrystalline structure in terms of both performance and stability

FMR1 and AKT/mTOR signaling in human granulosa cells : functional interaction and impact on ovarian response

We aimed to determine whether a functional link with impact on female ovarian reserve exists between FMR1 expression and expression ratios of AKT/mTOR signaling genes in human granulosa cells in vivo, as suggested from prior in vitro data. Three hundred and nine women, who were classified as normal (NOR; n = 225) and poor (POR; n = 84) responders based on their ovarian reserve, were recruited during stimulation for assisted reproductive techniques. Expressions of FMR1 and of key genes of the AKT/mTOR and AKT/FOXO1/3 signaling pathways were comparatively analyzed in their granulosa cells. FMR1 expression in granulosa cells of NOR and POR correlated significantly with AKT1, TSC2, mTOR, and S6K expression. No correlation was found between FMR1 and FOXO1 in all, and FOXO3 expression in POR, patients. AKT1 expression was significantly higher and FOXO1 expression lower in POR samples, whereas AKT1 expression was lower and FOXO1 expression was higher in NOR samples. In human native granulosa cells, FMR1 expression significantly correlated with the expression of key genes of the AKT/mTOR signaling pathway, but not with the FOXO1/3 signaling pathway. Our data point to a functional link between FMR1 expression and expression of the AKT/mTOR signaling pathway genes controlling human follicular maturation

FMR1 expression in human granulosa cells increases with exon 1 CGG repeat length depending on ovarian reserve

Background: Fragile-X-Mental-Retardation-1- (FMR1)-gene is supposed to be a key gene for ovarian reserve and folliculogenesis. It contains in its 5’-UTR a triplet-base-repeat (CGG), that varies between 26 and 34 in general population. CGG-repeat-lengths with 55–200 repeats (pre-mutation = PM) show instable heredity with a tendency to increase and are associated with premature-ovarian-insufficiency or failure (POI/POF) in about 20%. FMR1-mRNA-expression in leucocytes and granulosa cells (GCs) increases with CGG-repeat-length in PM-carriers, but variable FMR1-expression profiles were also described in women with POI without PM-FMR1 repeat-length. Additionally, associations between low numbers of retrieved oocytes and elevated FMR1-expression levels have been shown in GCs of females with mid-range PM-CGG-repeats without POI. Effects of FMR1-repeat-lengths-deviations (n < 26 or n > 34) below the PM range (n < 55) on ovarian reserve and response to ovarian stimulation remain controversial. Methods: We enrolled 229 women undergoing controlled ovarian hyperstimulation for IVF/ICSI-treatment and devided them in three ovarian-response-subgroups: Poor responder (POR) after Bologna Criteria, polycystic ovary syndrome (PCO) after Rotterdam Criteria, or normal responder (NOR, control group). Subjects were subdivided into six genotypes according to their be-allelic CGG-repeat length. FMR1-CGG-repeat-length was determined using ALF-express-DNA-sequencer or ABI 3100/3130 × 1-sequencer. mRNA was extracted from GCs after follicular aspiration and quantitative FMR1-expression was determined using specific TaqMan-Assay and applying the ΔΔCT method. Kruskall-Wallis-Test or ANOVA were used for simple comparison between ovarian reserve (NOR, POR or PCO) and CGG-subgroups or cohort demographic data. All statistical analysis were performed with SPSS and statistical significance was set at p ≤ 0.05. Results: A statistically significant increase in FMR1-mRNA-expression-levels was detected in GCs of PORs with heterozygous normal/low-CGG-repeat-length compared with other genotypes (p = 0.044). Conclusion: Female ovarian response may be negatively affected by low CGG-alleles during stimulation. In addition, due to a low-allele-effect, folliculogenesis may be impaired already prior to stimulation leading to diminished ovarian reserve and poor ovarian response. A better understanding of FMR1 expression-regulation in GCs may help to elucidate pathomechanisms of folliculogenesis disorders and to develop risk-adjusted treatments for IVF/ICSI-therapy. Herewith FMR1-genotyping potentially provides a better estimatation of treatment outcome and allows the optimal adaptation of stimulation protocols in future

Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%

Perovskite solar cells (PSCs) with efficiencies greater than 20% have been realized only with expensive organic hole-transporting materials. We demonstrate PSCs that achieve stabilized efficiencies exceeding 20% with copper(I) thiocyanate (CuSCN) as the hole extraction layer. A fast solvent removal method enabled the creation of compact, highly conformal CuSCN layers that facilitate rapid carrier extraction and collection. The PSCs showed high thermal stability under long-term heating, although their operational stability was poor. This instability originated from potential-induced degradation of the CuSCN/Au contact. The addition of a conductive reduced graphene oxide spacer layer between CuSCN and gold allowed PSCs to retain >95% of their initial efficiency after aging at a maximum power point for 1000 hours under full solar intensity at 60 degrees C. Under both continuous full-sun illumination and thermal stress, CuSCN-based devices surpassed the stability of spiro-OMeTAD-based PSCs

Function Follows Form: Correlation between the Growth and Local Emission of Perovskite Structures and the Performance of Solar Cells

Understanding the relationship between the growth and local emission of hybrid perovskite structures and the performance of the devices based on them demands attention. This study investigates the local structural and emission features of CH3NH3PbI3, CH3NH3PbBr3, and CH(NH2) 2PbBr(3) perovskite films deposited under different yet optimized conditions using X-ray scattering and cathodoluminescence spectroscopy, respectively. X-ray scattering shows that a CH3NH3PbI3 film involving spin coating of CH3NH3I instead of dipping is composed of perovskite structures exhibiting a preferred orientation with [202] direction perpendicular to the surface plane. The device based on the CH3NH3PbI3 film composed of oriented crystals yields a relatively higher photovoltage. In the case of CH3NH3PbBr3, while the crystallinity decreases when the HBr solution is used in a single-step method, the photovoltage enhancement from 1.1 to 1.46 V seems largely stemming from the morphological improvements, i.e., a better connection between the crystallites due to a higher nucleation density. Furthermore, a high photovoltage of 1.47 V obtained from CH(NH2)(2)PbBr3 devices could be attributed to the formation of perovskite films displaying uniform cathodoluminescence emission. The comparative analysis of the local structural, morphological, and emission characteristics of the different perovskite films supports the higher photovoltage yielded by the relatively better performing devices

From Chalcogen Bonding to S–π Interactions in Hybrid Perovskite Photovoltaics

The stability of hybrid organic–inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low‐dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provides an effective strategy to improve their stability, yet often at the expense of their performance. To address this limitation, supramolecular engineering of noncovalent interactions between organic and inorganic components has shown potential by relying on hydrogen bonding and conventional van der Waals interactions. Here, the capacity to access novel LD perovskite structures that uniquely assemble through unorthodox S‐mediated interactions is explored by incorporating benzothiadiazole‐based moieties. The formation of S‐mediated LD structures is demonstrated, including one‐dimensional (1D) and layered two‐dimensional (2D) perovskite phases assembled via chalcogen bonding and S–π interactions, through a combination of techniques, such as single crystal and thin film X‐ray diffraction, as well as solid‐state NMR spectroscopy, complemented by molecular dynamics simulations, density functional theory calculations, and optoelectronic characterization, revealing superior conductivities of S‐mediated LD perovskites. The resulting materials are applied in n‐i‐p and p‐i‐n perovskite solar cells, demonstrating enhancements in performance and operational stability that reveal a versatile supramolecular strategy in photovoltaics

From Chalcogen Bonding to S–π Interactions in Hybrid Perovskite Photovoltaics

The stability of hybrid organic–inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low‐dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provides an effective strategy to improve their stability, yet often at the expense of their performance. To address this limitation, supramolecular engineering of noncovalent interactions between organic and inorganic components has shown potential by relying on hydrogen bonding and conventional van der Waals interactions. Here, the capacity to access novel LD perovskite structures that uniquely assemble through unorthodox S‐mediated interactions is explored by incorporating benzothiadiazole‐based moieties. The formation of S‐mediated LD structures is demonstrated, including one‐dimensional (1D) and layered two‐dimensional (2D) perovskite phases assembled via chalcogen bonding and S–π interactions, through a combination of techniques, such as single crystal and thin film X‐ray diffraction, as well as solid‐state NMR spectroscopy, complemented by molecular dynamics simulations, density functional theory calculations, and optoelectronic characterization, revealing superior conductivities of S‐mediated LD perovskites. The resulting materials are applied in n‐i‐p and p‐i‐n perovskite solar cells, demonstrating enhancements in performance and operational stability that reveal a versatile supramolecular strategy in photovoltaics