Stator Design of Alternate Slot Winding for Reducing Torque Pulsation With Magnet Designs in Surface-Mounted Permanent Magnet Motors

This paper proposes a stator design that consists of a combination of an alternate slot winding and dummy slots to minimize pulsating torque in surface-mounted permanent magnet synchronous motors. The alternate arrangement of winding coils is designed to eliminate a harmonic component of back electromotive force that gives rise to a harmonic component of pulsating torque. However, the non-uniform arrangement of slots decreases the frequency of the cogging torque by half and may aggravate torque pulsation. To compensate for the drawback or the decrease in the frequency of the cogging torque, dummy slots are introduced in the alternately slotted stator. A theoretical method is developed for the proposed stator combination. The proposed stator design is applied to a prototype in combination with other rotor magnet design techniques, such as magnet shifting and the adjustment of magnet width, to minimize pulsating torque. The results show that the designed motor reduces the ripple factor of the torque by approximately 30% relative to the original value. In addition, the proposed alternate slot winding is validated by comparing the design with equal slot-winding designs optimized through finite-element method analysis

Consideration for fractional slot winding of permanent magnet type synchronous machine

Fractional Winding is used for permanent magnet type synchronous machine to improve the EMF form and cogging etc. This paper report the characteristics of q=1/2 and q=3/8 (q<0.5) especially. And the mixed coils in each phase winding we called, can give the flexibility of winding design. We report the advantages of this winging method with theory and measured data.2011 International Conference on Electrical Machines and Systems, ICEMS 2011; Beijing; 20 August 2011 through 23 August 201

Fundamental characteristics of a novel self-starting type permanent magnet synchronous motor

Wide use of permanent magnet synchronous motors produces a request for adding self-starting function to them. We propose a squirrel-cage rotor with permanent magnets for the self-starting synchronous motors. This paper shows the rotor configuration of a proposed motor and investigates the fundamental characteristics associated with the self-starting function.15th International Conference on Electrical Machines and Systems, ICEMS 2012; Sapporo; Japan; 21 October 2012 ～ 24 October 201

Performance of segment type switched reluctance motor using grain-oriented

Authors developed a segment type switched reluctance motor (SRM) as a rare earth less motor. The object is to reduce the acoustic noise and vibration as well as improve the torque characteristics. In this paper, we propose the performance improve method using grain-oriented electric steel as the segment core. The validity is confirmed experimentally.15th International Conference on Electrical Machines and Systems, ICEMS 2012; Sapporo; Japan; 21 October 2012 ～ 24 October 201

A characteristic experiment of 4-phase segment type switched reluctance motor

Authors developed a novel segment type switched reluctance motor (SRM) as a rare earth less motor. The torque was increased by 40% and the radial force was decreased by 76% compared with the same size VR type SRM. Increasing the average torque, however, caused increasing torque ripple. In this paper we propose a 4-phase segment type switched reluctance motor and show that the torque ripple can be decreased by controlling the excitation current.15th International Conference on Electrical Machines and Systems, ICEMS 2012; Sapporo; Japan; 21 October 2012 ～ 24 October 201

Prilocaine-and Lidocaine-Induced Methemoglobinemia Is Caused by Human Carboxylesterase-, CYP2E1-, and CYP3A4-Mediated Metabolic Activation

ABSTRACT Prilocaine and lidocaine are classified as amide-type local anesthetics for which serious adverse effects include methemoglobinemia. Although the hydrolyzed metabolites of prilocaine (o-toluidine) and lidocaine (2,6-xylidine) have been suspected to induce methemoglobinemia, the metabolic enzymes that are involved remain uncharacterized. In the present study, we aimed to identify the human enzymes that are responsible for prilocaine-and lidocaine-induced methemoglobinemia. Our experiments revealed that prilocaine was hydrolyzed by recombinant human carboxylesterase (CES) 1A and CES2, whereas lidocaine was hydrolyzed by only human CES1A. When the parent compounds (prilocaine and lidocaine) were incubated with human liver microsomes (HLM), methemoglobin (MetHb) formation was lower than when the hydrolyzed metabolites were incubated with HLM. In addition, Met-Hb formation when prilocaine and o-toluidine were incubated with HLM was higher than that when lidocaine and 2,6-xylidine were incubated with HLM. Incubation with diisopropyl fluorophosphate and bis-(4-nitrophenyl) phosphate, which are general inhibitors of CES, significantly decreased Met-Hb formation when prilocaine and lidocaine were incubated with HLM. An anti-CYP3A4 antibody further decreased the residual formation of Met-Hb. Met-Hb formation after the incubation of o-toluidine and 2,6-xylidine with HLM was only markedly decreased by incubation with an anti-CYP2E1 antibody. o-Toluidine and 2,6-xylidine were further metabolized by CYP2E1 to 4-and 6-hydroxy-o-toluidine and 4-hydroxy-2,6-xylidine, respectively, and these metabolites were shown to more efficiently induce Met-Hb formation than the parent compounds. Collectively, we found that the metabolites produced by human CES-, CYP2E1-, and CYP3A4-mediated metabolism were involved in prilocaine-and lidocaineinduced methemoglobinemia

On the improvement performance of a dual rotor segment type SRM

A dual rotor segment type switched reluctance motor (SRM) is proposed for flat configuration. It has toroidal stator coil and has inner rotor as well as outer rotor. The performance characteristics are calculated using finite element method. On a flat type SRM, leakage flux is greatly generated at both side coil. To reduce the leakage flux we propose shield structure. Effectiveness of the shield structure is verified analytically.2013 IEEE 10th International Conference on Power Electronics and Drive Systems, PEDS 2013; Kitakyushu; Japan; 22 April 2013 through 25 April 201

Characteristics of a half-wave rectified brushless synchronous generator

The paper proposes the half-wave rectified brushless synchronous generator and analyzes the basic characteristics using the finite element method. It is based on the half-wave rectified excitation theory and doesn\u27t need brush and slip ring system or permanent magnets for field excitation.7th International Power Electronics Conference, IPEC-Hiroshima - ECCE Asia 2014; Hiroshima; Japan; 18 May 2014 through 21 May 201