Unraveling loss mechanisms arising from energy‐level misalignment between metal halide perovskites and hole transport layers

Metal halide perovskites are promising light absorbers for multijunction photovoltaic applications because of their remarkable bandgap tunability, achieved through compositional mixing on the halide site. However, poor energy-level alignment at the interface between wide-bandgap mixed-halide perovskites and charge-extraction layers still causes significant losses in solar-cell performance. Here, the origin of such losses is investigated, focusing on the energy-level misalignment between the valence band maximum and the highest occupied molecular orbital (HOMO) for a commonly employed combination, FA0.83Cs0.17Pb(I1-xBrx)3 with bromide content x ranging from 0 to 1, and poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine] (PTAA). A combination of time-resolved photoluminescence spectroscopy and numerical modeling of charge-carrier dynamics reveals that open-circuit voltage (VOC) losses associated with a rising energy-level misalignment derive from increasing accumulation of holes in the HOMO of PTAA, which then subsequently recombine non-radiatively across the interface via interfacial defects. Simulations assuming an ideal choice of hole-transport material to pair with FA0.83Cs0.17Pb(I1-xBrx)3 show that such VOC losses originating from energy-level misalignment can be reduced by up to 70 mV. These findings highlight the urgent need for tailored charge-extraction materials exhibiting improved energy-level alignment with wide-bandgap mixed-halide perovskites to enable solar cells with improved power conversion efficiencies

S(C)ENTINEL - monitoring automated vehicles with olfactory reliability displays

Overreliance in technology is safety-critical and it is assumed that this could have been a main cause of severe accidents with automated vehicles. To ease the complex task of per- manently monitoring vehicle behavior in the driving en- vironment, researchers have proposed to implement relia- bility/uncertainty displays. Such displays allow to estimate whether or not an upcoming intervention is likely. However, presenting uncertainty just adds more visual workload on drivers, who might also be engaged in secondary tasks. We suggest to use olfactory displays as a potential solution to communicate system uncertainty and conducted a user study (N=25) in a high-fidelity driving simulator. Results of the ex- periment (conditions: no reliability display, purely visual reliability display, and visual-olfactory reliability display) comping both objective (task performance) and subjective (technology acceptance model, trust scales, semi-structured interviews) measures suggest that olfactory notifications could become a valuable extension for calibrating trust in automated vehicles

Compositional transformation and impurity-mediated optical transitions in co-evaporated Cu2AgBiI6 thin films for photovoltaic applications

Quaternary copper-silver-bismuth-iodide compounds represent a promising new class of wide-bandgap (2 eV) semiconductors for photovoltaic and photodetector applications. In this study, vapor phase co-evaporation is utilized to fabricate Cu2AgBiI6 thin films and photovoltaic devices. The findings show that the properties of vapor-deposited films are highly dependent upon processing temperature, exhibiting increased pinhole density and transforming into a mixture of quaternary, binary, and metallic phases depending on the post-deposition annealing temperature. This change in phase is accompanied by an enhancement in photoluminescence (PL) intensity and charge-carrier lifetime, along with the emergence of an additional absorption peak at high energy (≈3 eV). Generally, increased PL is a desirable property for a solar absorber material, but this change in PL is ascribed to the formation of CuI impurity domains, whose defect-mediated optical transition dominates the emission properties of the thin film. Via optical pump terahertz probe spectroscopy, it is revealed that CuI impurities hinder charge-carrier transport in Cu2AgBiI6 thin films. It is also revealed that the predominant performance limitation in Cu2AgBiI6 materials is the short electron-diffusion length. Overall, the findings pave the way for potential solutions to critical issues in copper-silver-bismuth-iodide materials and indicate strategies to develop environmentally compatible wide-bandgap semiconductors

Thermally stable perovskite solar cells by all-vacuum deposition

Vacuum deposition is a solvent-free method suitable for growing thin films of metal halide perovskite (MHP) semiconductors. However, most reports of high-efficiency solar cells based on such vacuum-deposited MHP films incorporate solution-processed hole transport layers (HTLs), thereby complicating prospects of industrial upscaling and potentially affecting the overall device stability. In this work, we investigate organometallic copper phthalocyanine (CuPc) and zinc phthalocyanine (ZnPc) as alternative, low-cost, and durable HTLs in all-vacuum-deposited solvent-free formamidinium-cesium lead triodide [CH(NH2)2]0.83Cs0.17PbI3 (FACsPbI3) perovskite solar cells. We elucidate that the CuPc HTL, when employed in an "inverted"p-i-n solar cell configuration, attains a solar-to-electrical power conversion efficiency of up to 13.9%. Importantly, unencapsulated devices as large as 1 cm2 exhibited excellent long-term stability, demonstrating no observable degradation in efficiency after more than 5000 h in storage and 3700 h under 85 °C thermal stressing in N2 atmosphere

Strong absorption and ultrafast localisation in NaBiS2 nanocrystals with slow charge carrier recombination

I V VI2 ternary chalcogenides are gaining attention as earth abundant, nontoxic, and air stable absorbers for photovoltaic applications. However, the semiconductors explored thus far have slowly rising absorption onsets, and their charge carrier transport is not well understood yet. Herein, we investigate cation disordered NaBiS2 nanocrystals, which have a steep absorption onset, with absorption coefficients reaching gt;105 cm amp; 8722;1 just above its pseudo direct bandgap of 1.4 eV. Surprisingly, we also observe an ultrafast picosecond time scale photoconductivity decay and long lived charge carrier population persisting for over onemicrosecond in NaBiS2 nanocrystals. These unusual features arise because of the localised, non bonding S p character of the upper valence band, which leads to a high density of electronic states at the band edges, ultrafast localisation of spatially separated electrons and holes, as well as the slow decay of trapped holes. Thiswork reveals the critical role of cation disorder in these systems on both absorption characteristics and charge carrier kinetic

Researching COVID to enhance recovery (RECOVER) pregnancy study: Rationale, objectives and design

Importance Pregnancy induces unique physiologic changes to the immune response and hormonal changes leading to plausible differences in the risk of developing post-acute sequelae of SARS-CoV-2 (PASC), or Long COVID. Exposure to SARS-CoV-2 during pregnancy may also have long-term ramifications for exposed offspring, and it is critical to evaluate the health outcomes of exposed children. The National Institutes of Health (NIH) Researching COVID to Enhance Recovery (RECOVER) Multi-site Observational Study of PASC aims to evaluate the long-term sequelae of SARS-CoV-2 infection in various populations. RECOVER-Pregnancy was designed specifically to address long-term outcomes in maternal-child dyads. Methods RECOVER-Pregnancy cohort is a combined prospective and retrospective cohort that proposes to enroll 2,300 individuals with a pregnancy during the COVID-19 pandemic and their offspring exposed and unexposed in utero, including single and multiple gestations. Enrollment will occur both in person at 27 sites through the Eunice Kennedy Shriver National Institutes of Health Maternal-Fetal Medicine Units Network and remotely through national recruitment by the study team at the University of California San Francisco (UCSF). Adults with and without SARS-CoV-2 infection during pregnancy are eligible for enrollment in the pregnancy cohort and will follow the protocol for RECOVER-Adult including validated screening tools, laboratory analyses and symptom questionnaires followed by more in-depth phenotyping of PASC on a subset of the overall cohort. Offspring exposed and unexposed in utero to SARS-CoV-2 maternal infection will undergo screening tests for neurodevelopment and other health outcomes at 12, 18, 24, 36 and 48 months of age. Blood specimens will be collected at 24 months of age for SARS-CoV-2 antibody testing, storage and anticipated later analyses proposed by RECOVER and other investigators. Discussion RECOVER-Pregnancy will address whether having SARS-CoV-2 during pregnancy modifies the risk factors, prevalence, and phenotype of PASC. The pregnancy cohort will also establish whether there are increased risks of adverse long-term outcomes among children exposed in utero

Roadmap on organic inorganic hybrid perovskite semiconductors and devices

Metal halide perovskites are the first solution processed semiconductors that can compete in their functionality with conventional semiconductors, such as silicon. Over the past several years, perovskite semiconductors have reported breakthroughs in various optoelectronic devices, such as solar cells, photodetectors, light emitting and memory devices, and so on. Until now, perovskite semiconductors face challenges regarding their stability, reproducibility, and toxicity. In this Roadmap, we combine the expertise of chemistry, physics, and device engineering from leading experts in the perovskite research community to focus on the fundamental material properties, the fabrication methods, characterization and photophysical properties, perovskite devices, and current challenges in this field. We develop a comprehensive overview of the current state of the art and offer readers an informed perspective of where this field is heading and what challenges we have to overcome to get to successful commercializatio