28,933 research outputs found
Estimating Carotid Pulse and Breathing Rate from Near-infrared Video of the Neck
Objective: Non-contact physiological measurement is a growing research area
that allows capturing vital signs such as heart rate (HR) and breathing rate
(BR) comfortably and unobtrusively with remote devices. However, most of the
approaches work only in bright environments in which subtle
photoplethysmographic and ballistocardiographic signals can be easily analyzed
and/or require expensive and custom hardware to perform the measurements.
Approach: This work introduces a low-cost method to measure subtle motions
associated with the carotid pulse and breathing movement from the neck using
near-infrared (NIR) video imaging. A skin reflection model of the neck was
established to provide a theoretical foundation for the method. In particular,
the method relies on template matching for neck detection, Principal Component
Analysis for feature extraction, and Hidden Markov Models for data smoothing.
Main Results: We compared the estimated HR and BR measures with ones provided
by an FDA-cleared device in a 12-participant laboratory study: the estimates
achieved a mean absolute error of 0.36 beats per minute and 0.24 breaths per
minute under both bright and dark lighting.
Significance: This work advances the possibilities of non-contact
physiological measurement in real-life conditions in which environmental
illumination is limited and in which the face of the person is not readily
available or needs to be protected. Due to the increasing availability of NIR
imaging devices, the described methods are readily scalable.Comment: 21 pages, 15 figure
Bound state of dimers on a spherical surface
The study of particle motion on spherical surfaces is relevant to adsorption
on buckyballs and other solid particles. This paper reports results for the
binding energy of such dimers, consisting of two light particles (He atoms or
hydrogen molecules) constrained to move on a spherical surface. The binding
energy reaches a particularly large value when the radius of the sphere is
about 3/4 of the particles' diameter.Comment: 6 pages, 3 figures, submitted to JLTP, conference proceedings QFS
200
Flight measured and calculated exhaust jet conditions for an F100 engine in an F-15 airplane
The exhaust jet conditions, in terms of temperature and Mach number, were determined for a nozzle-aft end acoustic study flown on an F-15 aircraft. Jet properties for the F100 EMD engines were calculated using the engine manufacturer's specification deck. The effects of atmospheric temperature on jet Mach number, M10, were calculated. Values of turbine discharge pressure, PT6M, jet Mach number, and jet temperature were calculated as a function of aircraft Mach number, altitude, and power lever angle for the test day conditions. At a typical test point with a Mach number of 0.9, intermediate power setting, and an altitude of 20,000 ft, M10 was equal to 1.63. Flight measured and calculated values of PT6M were compared for intermediate power at altitudes of 15500, 20500, and 31000 ft. It was found that at 31000 ft, there was excellent agreement between both, but for lower altitudes the specification deck overpredicted the flight data. The calculated jet Mach numbers were believed to be accurate to within 2 percent
Reported Impacts of Coaches’ Facework on Motivation and Credibility
Coaches’ credibility and athletes’ motivation were examined in the context of the coaches’ facework skills. Young and older adults were surveyed with questionnaires that looked at facework, credibility, and motivation in order for them to reflect on their past experiences with coaches. Analysis revealed that the perceived credibility of the coaches by their athletes was significantly correlated with the coaches’ reported facework during performance feedback. In contrast, facework showed no significant correlation with the athletes’ reported levels of motivation. Together these findings show that the facework of coaches holds differing importance for different outcomes in the coaching process and can affect the potential of the athletes’ growth in sport
Interrelationship of Ground and Surface Water Quality in the El Paso-Juarez and Mesilla Valleys
Experiences in porting mini-applications to OpenACC and OpenMP on heterogeneous systems
This article studies mini-applications—Minisweep, GenASiS, GPP, and FF—that use computational methods commonly encountered in HPC. We have ported these applications to develop OpenACC and OpenMP versions, and evaluated their performance on Titan (Cray XK7 with K20x GPUs), Cori (Cray XC40 with Intel KNL), Summit (IBM AC922 with Volta GPUs), and Cori-GPU (Cray CS-Storm 500NX with Intel Skylake and Volta GPUs). Our goals are for these new ports to be useful to both application and compiler developers, to document and describe the lessons learned and the methodology to create optimized OpenMP and OpenACC versions, and to provide a description of possible migration paths between the two specifications. Cases where specific directives or code patterns result in improved performance for a given architecture are highlighted. We also include discussions of the functionality and maturity of the latest compilers available on the above platforms with respect to OpenACC or OpenMP implementations
- …