Narrow Linewidth 780 nm Distributed Feedback Lasers for Cold Atom Quantum Technology

Cold atom quantum technology systems have a wide range of potential applications which includes atomic clocks, rotational sensors, inertial sensors, quantum navigators, magnetometers and gravimeters. The UK Quantum Technology Hub in Sensors and Metrology has the aim of developing miniature cold atom systems using an approach similar to that pioneered by the chip scale atomic clock where microfabricated vacuum chambers have atomic transitions excited and probed by lasers. Whilst narrow linewidth Ti:Sa and external cavity diode lasers have been required for cooling and control, such lasers are too large, power hungry and expensive for future miniature cold atom systems. Here we demonstrate 1 mm long 780.24 nm GaAs/AlGaAs distributed feedback (DFB) lasers aimed at 87Rb cold atom systems operating at 20 ˚C with over 50 mW of power and side-mode suppression ratios of 46 dB using sidewall gratings and no regrowth. Rb spectroscopy is used to demonstrate linewidths below the required 6.07 MHz natural linewidth of the 87Rb D2 optical transition used for cooling. Initial packaged fibre-coupled devices demonstrate lifetimes greater than 200 hours. We also investigate the use of integrated semiconductor amplifiers (SOAs) and longer devices to further reduce the linewidths well below 1 MHz. A range of options to control the populations of electrons in the hyperfine split energy levels spaced by 3.417 GHz are examined. Two integrated lasers, integrated electro-absorption modulators (EAMs) and the direct modulation of a single DFB laser approaches are investigated and we will discuss which is best suited to integrated cold atom systems

Continuous wave room temperature external ring cavity quantum cascade laser

An external ring cavity quantum cascade laser operating at ∼5.2 μm wavelength in a continuous-wave regime at the temperature of 15 °C is demonstrated. Out-coupled continuous-wave optical powers of up to 23 mW are observed for light of one propagation direction with an estimated total intra-cavity optical power flux in excess of 340 mW. The uni-directional regime characterized by the intensity ratio of more than 60 for the light propagating in the opposite directions was achieved. A single emission peak wavelength tuning range of 90 cm-1 is realized by the incorporation of a diffraction grating into the cavity

A registry-based follow-up study, comparing the incidence of cardiovascular disease in native Danes and immigrants born in Turkey, Pakistan and the former Yugoslavia: do social inequalities play a role?

<p>Abstract</p> <p>Background</p> <p>This study compared the incidence of cardiovascular disease (CVD) and acute myocardial infarction (AMI) between native Danes and immigrants born in Turkey, Pakistan and the former Yugoslavia. Furthermore, we examined whether different indicators of socioeconomic status (SES), such as employment, income and housing conditions influenced potential differences.</p> <p>Methods</p> <p>In this registry-based follow-up study individuals were identified in a large database that included individuals from two major regions in Denmark, corresponding to about 60% of the Danish population. Incident cases of CVD and AMI included fatal and non-fatal events and were taken from registries. Using Cox regression models, we estimated incidence rates at 5-year follow-up.</p> <p>Results</p> <p>Immigrant men and women from Turkey and Pakistan had an increased incidence of CVD, compared with native Danish men. In the case of AMI, a similar pattern was observed; however, differences were more pronounced. Pakistanis and Turks with a shorter duration of residence had a lower incidence, compared with those of a longer residence. Generally, no notable differences were observed between former Yugoslavians and native Danes. In men, differences in CVD and AMI were reduced after adjustment for SES, in particular, among Turks regarding CVD. In women, effects were particularly reduced among Yugoslavians in the case of CVD and in Turks in the case of CVD and AMI after adjustment for SES.</p> <p>Conclusions</p> <p>In conclusion, country of birth-related differences in the incidence of CVD and AMI were observed. At least some of the differences that we uncovered were results of a socioeconomic effect. Duration of residence also played a certain role. Future studies should collect and test different indicators of SES in studies of CVD among immigrants.</p

Chemical vapour deposition synthetic diamond: materials, technology and applications

Substantial developments have been achieved in the synthesis of chemical vapour deposition (CVD) diamond in recent years, providing engineers and designers with access to a large range of new diamond materials. CVD diamond has a number of outstanding material properties that can enable exceptional performance in applications as diverse as medical diagnostics, water treatment, radiation detection, high power electronics, consumer audio, magnetometry and novel lasers. Often the material is synthesized in planar form, however non-planar geometries are also possible and enable a number of key applications. This article reviews the material properties and characteristics of single crystal and polycrystalline CVD diamond, and how these can be utilized, focusing particularly on optics, electronics and electrochemistry. It also summarizes how CVD diamond can be tailored for specific applications, based on the ability to synthesize a consistent and engineered high performance product.Comment: 51 pages, 16 figure

Barriers and facilitators of effective health education targeting people with mental illness: a theory-based ethnographic study

Abstract Background Health education is particularly important for people with mental illness because they are at higher risk of becoming overweight or obese and developing type 2 diabetes than are members of the general population. However, little is known about how to provide health education activities that promote engagement and motivation among people with mental illness. Methods This study used ethnographic methods to examine barriers and facilitators of effective health education targeting people with mental illness by applying the concept of flow as a theoretical framework. Flow refers to immersion in an activity and is related to motivation. Data were collected through participant observation during eight health-educating activities and were thematically analysed using the concept of flow. Fieldwork was carried out between May and July 2015 in Denmark. Results Barriers to flow included: 1) information overload, particularly of biomedical rationales for behaviour change; 2) a one-size-fits-all approach that failed to address the needs and preferences of the target group; and 3) one-way communication allowing little time for reflection. Educators promoted a state of flow when they spoke less and acted outside of a traditional expert role, thus engaging participants in the activity. Flow was facilitated when educators were attentive and responsive to people with mental illness, and when they stimulated reflection about health and health behaviour through open-ended questions, communication tools and in small group exercises. Conclusions This study suggests that more focus should be paid to training of educators in terms of skills to involve and engage people with mental illness in health education activities