89 research outputs found
High-speed spiral imaging technique for an atomic force microscope using a linear quadratic Gaussian controller
This paper demonstrates a high-speed spiral imaging technique for an atomic force microscope (AFM). As an alternative to traditional raster scanning, an approach of gradient pulsing using a spiral line is implemented and spirals are generated by applying single-frequency cosine and sine waves of slowly varying amplitudes to the X and Y-axes of the AFM's piezoelectric tube scanner (PTS). Due to these single-frequency sinusoidal input signals, the scanning process can be faster than that of conventional raster scanning. A linear quadratic Gaussian controller is designed to track the reference sinusoid and a vibration compensator is combined to damp the resonant mode of the PTS. An internal model of the reference sinusoidal signal is included in the plant model and an integrator for the system error is introduced in the proposed control scheme. As a result, the phase error between the input and output sinusoids from the X and Y-PTSs is reduced. The spirals produced have particularly narrow-band frequency measures which change slowly over time, thereby making it possible for the scanner to achieve improved tracking and continuous high-speed scanning rather than being restricted to the back and forth motion of raster scanning. As part of the post-processing of the experimental data, a fifth-order Butterworth filter is used to filter noises in the signals emanating from the position sensors and a Gaussian image filter is used to filter the images. A comparison of images scanned using the proposed controller (spiral) and the AFM PI controller (raster) shows improvement in the scanning rate using the proposed method
Improvement in the Imaging Performance of Atomic Force Microscopy: A Survey
Nanotechnology is the branch of science which deals with the manipulation of matters at an extremely high resolution down to the atomic level. In recent years, atomic force microscopy (AFM) has proven to be extremely versatile as an investigative tool in this field. The imaging performance of AFMs is hindered by: 1) the complex behavior of piezo materials, such as vibrations due to the lightly damped low-frequency resonant modes, inherent hysteresis, and creep nonlinearities; 2) the cross-coupling effect caused by the piezoelectric tube scanner (PTS); 3) the limited bandwidth of the probe; 4) the limitations of the conventional raster scanning method using a triangular reference signal; 5) the limited bandwidth of the proportional-integral controllers used in AFMs; 6) the offset, noise, and limited sensitivity of position sensors and photodetectors; and 7) the limited sampling rate of the AFM's measurement unit. Due to these limitations, an AFM has a high spatial but low temporal resolution, i.e., its imaging is slow, e.g., an image frame of a living cell takes up to 120 s, which means that rapid biological processes that occur in seconds cannot be studied using commercially available AFMs. There is a need to perform fast scans using an AFM with nanoscale accuracy. This paper presents a survey of the literature, presents an overview of a few emerging innovative solutions in AFM imaging, and proposes future research directions.This work was supported
in part by the Australian Research Council (ARC) under Grant FL11010002
and Grant DP160101121 and the UNSW Canberra under a Rector's Visiting
Fellowshi
Uma nova abordagem para modelagem e controle de sistemas não-lineares via inclusões diferenciais lineares limitadas por norma
A systematic approach to model nonlinear systems using norm-bounded linear differential inclusions (NLDIs) is proposed in this paper. The resulting NLDI model is suitable for the application of linear control design techniques and, therefore, it is possible to fulfill certain specifications for the underlying nonlinear system, within an operating region of interest in the state-space, using a linear controller designed for this NLDI model. Hence, a procedure to design a dynamic output feedback controller for the NLDI model is also proposed in this paper. One of the main contributions of the proposed modeling and control approach is the use of the mean-value theorem to represent the nonlinear system by a linear parameter-varying model, which is then mapped into a polytopic linear differential inclusion (PLDI) within the region of interest. To avoid the combinatorial problem that is inherent of polytopic models for medium- and large-sized systems, the PLDI is transformed into an NLDI, and the whole process is carried out ensuring that all trajectories of the underlying nonlinear system are also trajectories of the resulting NLDI within the operating region of interest. Furthermore, it is also possible to choose a particular structure for the NLDI parameters to reduce the conservatism in the representation of the nonlinear system by the NLDI model, and this feature is also one important contribution of this paper. Once the NLDI representation of the nonlinear system is obtained, the paper proposes the application of a linear control design method to this representation. The design is based on quadratic Lyapunov functions and formulated as search problem over a set of bilinear matrix inequalities (BMIs), which is solved using a two-step separation procedure that maps the BMIs into a set of corresponding linear matrix inequalities. Two numerical examples are given to demonstrate the effectiveness of the proposed approach
Design and application of a data driven controller using the small-gain constraint for positioning control of a nano-positioner
In this paper, the design of a data driven controller using a small-gain theorem approach for improving the positioning accuracy of a piezoelectric tube scanner (PTS) is demonstrated. Open-loop frequency responses of both the X-PTS and Y-PTS are measured using a band-limited sweep sine signal and are used as primary data for this control design. The frequency response of the controllers is synthesized by the application of the small-gain theorem constraints over the entire frequency range for both the axes. The experimental implementation of this feedback data driven controller provides significant vibration reduction, with 19 dB and 15 dB damping at the resonance frequencies of the X and Y-axes of the PTS, respectively. A comparison between the open-loop and closed-loop tracking performance for triangular signals shows significant improvement up to the scanning frequency of 150 Hz. Moreover, the design of this data driven controller is less complex than conventional controller design methods as it does not need a system model.This work was supported by the Australian Research Council under
grant DP160101121
Experiments on a real-time energy management system for islanded prosumer microgrids
This paper presents an experimental demonstration of a novel real-time Energy Management System (EMS) for inverter-based microgrids to achieve optimal economic operation using a simple dynamic algorithm without offline optimization process requirements. The dynamic algorithm solves the economic dispatch problem offering an adequate stability performance and an optimal power reference tracking under sudden load and generation changes. Convergence, optimality and frequency regulation properties of the real-time EMS are shown, and the effectiveness and compatibility with inner and primary controllers are validated in experiments, showing better performance on optimal power tracking and frequency regulation than conventional droop control power sharing techniques
Two-Tier Prediction of Solar Power Generation with Limited Sensing Resource
This paper considers a typical solar installations scenario with limited
sensing resources. In the literature, there exist either day-ahead solar
generation prediction methods with limited accuracy, or high accuracy short
timescale methods that are not suitable for applications requiring longer term
prediction. We propose a two-tier (global-tier and local-tier) prediction
method to improve accuracy for long term (24 hour) solar generation prediction
using only the historical power data. In global-tier, we examine two popular
heuristic methods: weighted k-Nearest Neighbors (k-NN) and Neural Network (NN).
In local-tier, the global-tier results are adaptively updated using real-time
analytical residual analysis. The proposed method is validated using the UCLA
Microgrid with 35kW of solar generation capacity. Experimental results show
that the proposed two-tier prediction method achieves higher accuracy compared
to day-ahead predictions while providing the same prediction length. The
difference in the overall prediction performance using either weighted k-NN
based or NN based in the global-tier are carefully discussed and reasoned. Case
studies with a typical sunny day and a cloudy day are carried out to
demonstrate the effectiveness of the proposed two-tier predictions
A novel compact dq-reference frame model for inverter-based microgrids
The development and the experimental validation of a novel dynamic model of an islanded three-phase Inverter-based Microgrid (IMG) is presented in this paper. The proposed model reproduces the relevant system dynamics without excessive complexity and enough accuracy. The dynamics of the IMG are captured with a compact and scalable dynamic model, considering inverter based distributed generators with d-current droop primary and proportional resonant inner controllers. The complete development of the model, the practical assumptions, and the accurate proportional power sharing of the primary control technique are shown. The accuracy performance was verified in experiments performed at the Aalborg Intelligent Microgrids Laboratory for an islanded IMG case
Cyber Physical Energy Systems Modules for Power Sharing Controllers in Inverter Based Microgrids
The Microgrids (MGs) are an effective way to deal with the smart grid challenges, including service continuity in the event of a grid interruption, and renewable energy integration. The MGs are compounded by multiple distributed generators (DGs), and the main control goals are load demand sharing and voltage and frequency stability. Important research has been reported to cope with the implementation challenges of the MGs including the power sharing control problem, where the use of cybernetic components such as virtual components, and communication systems is a common characteristic. The use of these cybernetic components to control complex physical systems generates new modeling challenges in order to achieve an adequate balance between complexity and accuracy in the MG model. The standardization problem of the cyber-physical MG models is addressed in this work, using a cyber-physical energy systems (CPES) modeling methodology to build integrated modules, and define the communication architectures that each power sharing control strategy requires in an AC-MG. Based on these modules, the control designer can identify the signals and components that eventually require a time delay analysis, communication requirements evaluation, and cyber-attacks’ prevention strategies. Similarly, the modules of each strategy allow for analyzing the potential advantages and drawbacks of each power sharing control technique from a cyber physical perspective
- …