1,171 research outputs found
Evidence for length-dependent wire expansion, filament dedensification and consequent degradation of critical current density in Ag-alloy sheathed Bi-2212 wires
It is well known that longer Bi-2212 conductors have significantly lower
critical current density (Jc) than shorter ones, and recently it has become
clear that a major cause of this reduction is internal gas pressure generated
during heat treatment, which expands the wire diameter and dedensifies the
Bi-2212 filaments. Here we report on the length-dependent expansion of 5 to 240
cm lengths of state-of-the-art, commercial Ag alloy-sheathed Bi-2212 wire after
full and some partial heat treatments. Detailed image analysis along the wire
length shows that the wire diameter increases with distance from the ends,
longer samples often showing evident damage and leaks provoked by the internal
gas pressure. Comparison of heat treatments carried out just below the melting
point and with the usual melt process makes it clear that melting is crucial to
developing high internal pressure. The decay of Jc away from the ends is
directly correlated to the local wire diameter increase, which decreases the
local Bi-2212 filament mass density and lowers Jc, often by well over 50%. It
is clear that control of the internal gas pressure is crucial to attaining the
full Jc of these very promising round wires and that the very variable
properties of Bi-2212 wires are due to the fact that this internal gas pressure
has so far not been well controlled
Reduction of gas bubbles and improved critical current density in Bi-2212 round wire by swaging
Bi-2212 round wire is made by the powder-in-tube technique. An unavoidable
property of powder-in-tube conductors is that there is about 30% void space in
the as-drawn wire. We have recently shown that the gas present in the as-drawn
Bi-2212 wire agglomerates into large bubbles and that they are presently the
most deleterious current limiting mechanism. By densifying short 2212 wires
before reaction through cold isostatic pressing (CIPping), the void space was
almost removed and the gas bubble density was reduced significantly, resulting
in a doubled engineering critical current density (JE) of 810 A/mm2 at 5 T, 4.2
K. Here we report on densifying Bi-2212 wire by swaging, which increased JE
(4.2 K, 5 T) from 486 A/mm2 for as-drawn wire to 808 A/mm2 for swaged wire.
This result further confirms that enhancing the filament packing density is of
great importance for making major JE improvement in this round-wire magnet
conductor.Comment: To be published in IEEE Transactions on Applied Superconductivity,
23, xxxxxx (2013
The World Heritage Naracoorte Caves beyond 500 ka: U-Pb dating and charcoal analysis from speleothems with implications for Pleistocene vertebrate fossil deposits
Session CL1.19Under the current rapid global warming, studying how environments responded to past climate change becomes increasingly important to better understand what impact climate variability has on regional flora and fauna. Our new multi-proxy study to the World Heritage Naracoorte Caves in southern Australia provides a unique window into the past climate as they are heavily decorated with speleothems but also contain in-fill deposits rich in Pleistocene vertebrate fossils including the extinct Australian megafauna. Until now, these speleothems have been dated using U-Th series and the fossil-bearing sediments with Optical Stimulated Luminescence and Electro Spin Resonance techniques, but only up to ca. 500 ka. We have U-Pb dated speleothems from the Naracoorte Caves for the first time and extended the record beyond 500 ka. We combined precise chronology with analyses of pollen and charcoal within the speleothems which allows us to better understand how southern Australiaâs climate and its vegetation changed during the Quaternary. It also provides a unique insight into the timing and extent of cave opening with important potential for much older vertebrate fossil deposits than previously thought.Rieneke Weij, Jon Woodhead, Liz Reed, Kale Sniderman, John Hellstrom, and Russell Drysdal
Recommended from our members
Tripled critical current in racetrack coils made of Bi-2212 Rutherford cables with overpressure processing and leakage control
We fabricated three racetrack coils (RC1, RC2, and RC3) from Bi-2212 Rutherford cables (17-strand, thickness Ă width = 1.44 mm Ă 7.8 mm, strand diameter = 0.8 mm) and applied overpressure processing heat treatment (OPHT). The quench currents of RC1 and RC2 reached 5268 A and 5781 A, respectively, despite them still, surprisingly, exhibiting some Bi-2212 leakage to the surface. After removing most of the leakages using a simple-to-implement insulation scheme, the quench current of RC3 improved to 6485 A, which is about three times the average quench current of a dozen racetrack coils that had been fabricated and reacted using the conventional 1 bar heat treatment. The results confirm the effectiveness of the OPHT technology and the new leakage control scheme for coils made from Bi-2212 Rutherford cables. Coils exhibited an increased quench current with increasing the current ramp rate from 5 to 200 A s ; they were quite stable against point and transient disturbances, and were capable of adsorbing persistent Joule heating at âŒ80 mW for >15 s before quenching. These behaviors are different from Nb-Ti and Nb Sn accelerator magnets. Overall, our results provide a critical evaluation and verification of Bi-2212 wire and magnet technologies (wire, insulation, heat treatment, coil fabrication, and coil operation), reveal crucial new stability features of Bi-2212 magnets, and demonstrate technological options for it to become a practical high-field magnet technology. -1
Strongly linked current flow in polycrystalline forms of the new superconductor MgB2
The discovery of superconductivity at 39 K in MgB2[1] raises many issues. One
of the central questions is whether this new superconductor resembles a
high-temperature-cuprate superconductor or a low-temperature metallic
superconductor in terms of its current carrying characteristics in applied
magnetic fields. In spite of the very high transition temperatures of the
cuprate superconductors, their performance in magnetic fields has several
drawbacks[2]. Their large anisotropy restricts high bulk current densities to
much less than the full magnetic field-temperature (H-T) space over which
superconductivity is found. Further, weak coupling across grain boundaries
makes transport current densities in untextured polycrystalline forms low and
strongly magnetic field sensitive[3,4]. These studies of MgB2 address both
issues. In spite of the multi-phase, untextured, nano-scale sub-divided nature
of our samples, supercurrents flow throughout without the strong sensitivity to
weak magnetic fields characteristic of Josephson-coupled grains[3].
Magnetization measurements over nearly all of the superconducting H-T plane
show good temperature scaling of the flux pinning force, suggestive of a
current density determined by flux pinning. At least two length scales are
suggested by the magnetization and magneto optical (MO) analysis but the cause
of this seems to be phase inhomogeneity, porosity, and minority insulating
phase such as MgO rather than by weakly coupled grain boundaries. Our results
suggest that polycrystalline ceramics of this new class of superconductor will
not be compromised by the weak link problems of the high temperature
superconductors, a conclusion with enormous significance for applications if
higher temperature analogs of this compound can be discovered
Multi-gap superconductivity in a BaFe1.84Co0.16As2 film from optical measurements at terahertz frequencies
We measured the THz reflectance properties of a high quality epitaxial thin
film of the Fe-based superconductor BaFeCoAs with
T=22.5 K. The film was grown by pulsed laser deposition on a DyScO
substrate with an epitaxial SrTiO intermediate layer. The measured
spectrum, i.e. the reflectivity ratio between the superconducting and
normal state reflectance, provides clear evidence of a superconducting gap
close to 15 cm. A detailed data analysis shows that a
two-band, two-gap model is absolutely necessary to obtain a good description of
the measured spectrum. The low-energy gap results to be
well determined (=15.50.5 cm), while the value of the
high-energy gap is more uncertain (=557 cm).
Our results provide evidence of a nodeless isotropic double-gap scenario, with
the presence of two optical gaps corresponding to 2 values close
to 2 and 7.Comment: Published Versio
Very high upper critical fields in MgB2 produced by selective tuning of impurity scattering
We report a significant enhancement of the upper critical field of
different samples alloyed with nonmagnetic impurities. By studying
films and bulk polycrystals with different resistivities , we show a
clear trend of increase as increases. One particular high
resistivity film had zero-temperature well above the
values of competing non-cuprate superconductors such as and Nb-Ti. Our
high-field transport measurements give record values and for high resistivity films and
for untextured bulk polycrystals. The highest
film also exhibits a significant upward curvature of , and
temperature dependence of the anisotropy parameter opposite to that of single crystals: decreases as the
temperature decreases, from to .
This remarkable enhancement and its anomalous temperature dependence
are a consequence of the two-gap superconductivity in , which offers
special opportunities for further increase by tuning of the impurity
scattering by selective alloying on Mg and B sites. Our experimental results
can be explained by a theory of two-gap superconductivity in the dirty limit.
The very high values of observed suggest that can be made
into a versatile, competitive high-field superconductor.Comment: An updated version of the paper (12/12/2002)that was placed on
cond-mat on May 7 200
Cave opening and fossil accumulation in Naracoorte, Australia, through charcoal and pollen in dated speleothems
Caves are important fossil repositories which provide records extending back over million-year timescales. While the physical processes of cave formation are well understood, the timing of initial cave development and openingâa more important parameter to studies of palaeontology, palaeoanthropology and archaeologyâhas proved more difficult to constrain. Here we investigate speleothems from the Naracoorte Cave Complex in southern Australia, with a rich record of Pleistocene vertebrate fossils (including extinct megafauna) and partly World Heritage-listed, using U-Th-Pb dating and analyses of their charcoal and pollen content. We find that, although speleothem formation began at least 1.34 million years ago, pollen and charcoal only began to be trapped within growing speleothems from 600,000 years ago. We interpret these two ages to represent the timing of initial cave development and the subsequent opening of the caves to the atmosphere respectively. These findings demonstrate the potential of U-Th-Pb dating combined with charcoal and pollen as proxies to assess the potential upper age limit of vertebrate fossil records found within caves.Rieneke Weij, Jon D. Woodhead, J. M. Kale Sniderman, John C. Hellstrom, Elizabeth Reed, Steven Bourne, Russell N. Drysdale and Timothy J. Pollar
Associations between health-related quality of life, physical function and fear of falling in older fallers receiving home care
Falls and injuries in older adults have significant consequences and costs, both personal and to society. Although having a high incidence of falls, high prevalence of fear of falling and a lower quality of life, older adults receiving home care are underrepresented in research on older fallers. The objective of this study is to determine the associations between health-related quality of life (HRQOL), fear of falling and physical function in older fallers receiving home care
- âŠ