Multilayer infrared beamsplitter film system

Multilayer infrared beamsplitter film system on a potassium bromide crystal substrate is operational over a wavelength range of 2.5 to 25 microns with nearly equal broadband reflectance and transmittance. It is useful in optical coating, vacuum deposition, radiometry, interferometry, and spectrometry

High efficiency optical beamsplitter designed for operation in the infrared region

Beamsplitter system uses potassium bromide as substrate for operating in the spectral region between 5 and 30 microns and calcium fluoride for narrowband applications. It uses a 13-layer film which yields nearly equal broadband infrared reflectance and transmittance

Cantilever-based Resonant Microsensors with Integrated Temperature Modulation for Transient Chemical Analysis

This work introduces a resonant cantilever platform with integrated temperature modulation for real-time chemical sensing. Embedded heaters allow for rapid thermal cycling of individual sensors, thereby enabling real-time transient signal analysis without the need for a microfluidic setup to switch between analyte and reference gases. Compared to traditional mass-sensitive microsensors operating in steady state, the on-chip generation of signal transients provides additional information for analyte discrimination

Development of Analytical Models of T- and U-shaped Cantilever-based MEMS Devices for Sensing and Energy Harvesting Applications

Dynamic-mode cantilever-based structures supporting end masses are frequently used as MEMS/NEMS devices in application areas as diverse as chemical/biosensing, atomic force microscopy, and energy harvesting. This paper presents a new analytical solution for the free vibration of a cantilever with a rigid end mass of finite size. The effects of both translational and rotational inertia as well as horizontal eccentricity of the end mass are incorporated into the model. This model is general regarding the end-mass distribution/geometry and is validated here for the commonly encountered geometries of T- and U-shaped cantilevers. Comparisons with 3D FEA simulations and experiments on silicon and organic MEMS are quite encouraging. The new solution gives insight into device behavior, provides an efficient tool for preliminary design, and may be extended in a straightforward manner to account for inherent energy dissipation in the case of organic-based cantilevers

Cantilever-based Resonant Gas Sensors with Integrated Recesses for Localized Sensing Layer Deposition

This work presents mass-sensitive hammerhead resonators with integrated recesses as a gas-phase chemical microsensor platform. Recesses are etched into the head region of the resonator to locally deposit chemically sensitive polymers by ink-jet printing. This permits the sensing films to be confined to areas that (a) are most effective in detecting mass loading and (b) are not strained during the in-plane vibrations of the resonator. As a result of the second point, even 5-μm thick polymer coatings on resonators with a 9-12 μm silicon thickness barely affect the Q-factor in air. This translates into higher frequency stability and ultimately higher sensor resolution compared to uniformly coated devices

Gilbert Damping in Magnetic Multilayers

We study the enhancement of the ferromagnetic relaxation rate in thin films due to the adjacent normal metal layers. Using linear response theory, we derive the dissipative torque produced by the s-d exchange interaction at the ferromagnet-normal metal interface. For a slow precession, the enhancement of Gilbert damping constant is proportional to the square of the s-d exchange constant times the zero-frequency limit of the frequency derivative of the local dynamic spin susceptibility of the normal metal at the interface. Electron-electron interactions increase the relaxation rate by the Stoner factor squared. We attribute the large anisotropic enhancements of the relaxation rate observed recently in multilayers containing palladium to this mechanism. For free electrons, the present theory compares favorably with recent spin-pumping result of Tserkovnyak et al. [Phys. Rev. Lett. \textbf{88},117601 (2002)].Comment: 1 figure, 5page

Size-dependent Surface States on Strained Cobalt Nanoislands on Cu(111)

Low-temperature scanning tunneling spectroscopy over Co nanoislands on Cu(111) showed that the surface states of the islands vary with their size. Occupied states exhibit a sizeable downward energy shift as the island size decreases. The position of the occupied states also significantly changes across the islands. Atomic-scale simulations and ab inito calculations demonstrate that the driving force for the observed shift is related to size-dependent mesoscopic relaxations in the nanoislands.Comment: 4 pages, 4 figure

Percolating through networks of random thresholds: Finite temperature electron tunneling in metal nanocrystal arrays

We investigate how temperature affects transport through large networks of nonlinear conductances with distributed thresholds. In monolayers of weakly-coupled gold nanocrystals, quenched charge disorder produces a range of local thresholds for the onset of electron tunneling. Our measurements delineate two regimes separated by a cross-over temperature $T^*$. Up to $T^*$ the nonlinear zero-temperature shape of the current-voltage curves survives, but with a threshold voltage for conduction that decreases linearly with temperature. Above $T^*$ the threshold vanishes and the low-bias conductance increases rapidly with temperature. We develop a model that accounts for these findings and predicts $T^*$.Comment: 5 pages including 3 figures; replaced 3/30/04: minor changes; final versio