Goede start kalf noodzaak voor minder medicijngebruik

Antibioticagebruik in de veehouderij wordt door de buitenwereld kritisch gevolgd

Chiral separation by enantioselective liquid–liquid extraction

The literature on enantioselective liquid–liquid extraction (ELLE) spans more than half a century of research. Nonetheless, a comprehensive overview has not appeared during the past few decades. Enantioselective liquid–liquid extraction is a technology of interest for a wide range of chemists and chemical engineers in the fields of fine chemicals, pharmaceuticals, agrochemicals, fragrances and foods. In this review the principles and advances of resolution through enantioselective liquid–liquid extraction are discussed, starting with an introduction on the principles of enantioselective liquid–liquid extraction including host–guest chemistry, extraction and phase transfer mechanisms, and multistage liquid–liquid extraction processing. Then the literature on enantioselective liquid–liquid extraction systems is reviewed, structured on extractant classes. The following extractant classes are considered: crown ether based extractants, metal complexes and metalloids, extractants based on tartrates, and a final section with all other types of chiral extractants.

Valorization of humin type byproducts from pyrolytic sugar conversions to biobased chemicals

The pyrolytic sugar fraction, obtained by an aqueous extraction of pyrolysis oil, is an attractive source for sugar-derived platform chemicals. However, solids (humin) formation occurs to a significant extent during hydrolysis and subsequent acid-catalyzed conversion processes. In this study, we report investigations on possible conversion routes (pyrolysis, liquefaction) of such humin byproducts to biobased chemicals. Experiments were carried out with a model humin made from a representative technical pyrolytic sugar and the product was characterized by elemental analysis, GPC, TGA, HPLC, GC-MS, FT-IR and NMR. The obtained humin sample is soluble in organic solvents (dimethyl sulfoxide (DMSO), tetrahydrofuran (THF), and isopropanol (IPA)), in contrast to typical more condensed humins from glucose and fructose, allowing characterization using NMR and GPC. All analyses reveal that the humins are oligomeric in nature (M-w of about 900 g/mol) and consist of sugar and furanic fragments linked with among others (substituted) aliphatic, ester units and, in addition, phenolic fragments with methoxy groups. The humins were used as a feed for catalytic pyrolysis and catalytic liquefaction experiments. Catalytic pyrolysis experiments (mg scale, programmable temperature vaporizer (PTV)-GC-MS, 550 degrees C) with HZSM-5 50 as the catalyst gave benzene-toluene-xylene-naphthalene-ethylbenzene mixtures (BTXNE) in 5.1 wt% yield based on humin intake. Liquefaction experiments (batch reactor, 350 degrees C, 4 h, isopropanol as both the solvent and hydrogen donor and Pt/CeO2 (4.43 wt% Pt) catalyst) resulted in 80 wt% conversion of the humin feed to a product oil with considerable amounts of phenolics and aromatics (ca. 24.7 % based on GC detectables in the humin oil). These findings imply that the techno-economic viability of pyrolysis oil biorefineries can be improved by converting humin type byproducts to high value, low molecular weight biobased chemicals

An improved catalytic pyrolysis concept for renewable aromatics from biomass involving a recycling strategy for co-produced polycyclic aromatic hydrocarbons

Catalytic pyrolysis of crude glycerol over a shaped H-ZSM-5 zeolite catalyst with (partial) recycling of the product oil was studied with the incentive to improve benzene, toluene, and xylene (BTX) yields. Recycling of the polycyclic aromatic hydrocarbon (PAH) fraction, after separation from BTX by distillation and co-feeding with the crude glycerol feed, was shown to have a positive effect on the BTX yield. Further improvements were achieved by hydrogenation of the PAH fraction using a Ru/C catalyst and hydrogen gas prior to co-pyrolysis, and BTX yields up to 16 wt% on feed were obtained. The concept was also shown to be beneficial to other biomass feeds such as e.g., Kraft lignin, cellulose, and Jatropha oil

Measurement of g-factor tensor in a quantum dot and disentanglement of exciton spins

We perform polarization-resolved magneto-optical measurements on single InAsP quantum dots embedded in an InP nanowire. In order to determine all elements of the electron and hole $g$-factor tensors, we measure in magnetic field with different orientations. The results of these measurements are in good agreement with a model based on exchange terms and Zeeman interaction. In our experiment, polarization analysis delivers a powerful tool that not only significantly increases the precision of the measurements, but also enables us to probe the exciton spin state evolution in magnetic fields. We propose a disentangling scheme of heavy-hole exciton spins enabling a measurement of the electron spin $T_2$ time

Towards Thermally Reversible Networks Based on Furan-Functionalization of Jatropha Oil

A novel biobased monomer for the preparation of thermally reversible networks based on the Diels-Alder reaction was synthesized from jatropha oil. The oil was epoxidized and subsequently reacted with furfurylamine to attach furan groups via an epoxide ring opening reaction. However, furfurylamine also reacted with the ester groups of the triglycerides via aminolysis, thus resulting in short-chain molecules that ultimately yielded brittle thermally reversible polymers upon cross-linking via a Diels-Alder reaction. A full-factorial experimental design was used in finding the optimum conditions to minimize ester aminolysis and to maximize the epoxide ring opening reaction as well as the number of furans attached to the modified oil. The optimum conditions were determined experimentally and were found to be 80 °C, 24 h, 1:1 molar ratio, with 50 mol % of LiBr with respect to the modified oil, resulting in 35% of ester conversion, 99% of epoxide conversion, and an average of 1.32 furans/triglyceride. Ultimately, further optimization by a statistical approach led to an average of 2.19 furans per triglyceride, which eventually yielded a flexible network upon cross-linking via a Diels-Alder reaction instead of the brittle one obtained when the furan-functionalization reaction was not optimized

Ozone mediated depolymerization and solvolysis of technical lignins under ambient conditions in ethanol

Technical lignins are highly available and inexpensive feedstocks derived from current large scale biomass utilizing industries. Their valorization represents a bottleneck in the development of biorefineries, as the inherently complex lignin structure often suffers severe condensation during isolation, leading to their current application as low value fuel. Processes able to depolymerize technical lignins into value-added (intermediate) molecules are of great interest for the development of integrated, viable routes aiming at the full valorization of lignocellulosic biomass. Here, we report an effective ozone mediated depolymerization of four technical lignins (Indulin-AT Kraft, ball-milled Indulin-AT Kraft, Alcell organosolv and Fabiola organosolv) in ethanol under ambient conditions without the need for catalysts. 52–87 wt% of these nearly ethanol insoluble lignins was broken down into soluble fragments upon ozone exposure. The average molecular weight of the soluble fragments was shown to have decreased by 40–75% compared to the parent materials. A range of (di)carboxylic acids and (di)ethyl esters was identified, accounting for up to 40 wt% of the ozonated lignin oils. These products are the result of phenol ring-opening reactions as well as oxidative cleavage of unsaturated linking motifs followed by partial esterification. Reactivity varied substantially among the lignin feedstocks. For instance, lower particle sizes and higher degradation of the native lignin structure were shown to be beneficial for the effective action of the ozone. Our results show that a straightforward ozonation process under ambient conditions can depolymerize recalcitrant lignins into oxygenated fragments and low molecular weight products soluble in ethanol. These can potentially be used for the synthesis of high-value drop-in chemicals