Alternative strategies for space station financing

The attributes of the proposed space station program are oriented toward research activities and technologies which generate long term benefits for mankind. Unless such technologies are deemed of national interest and thus are government funded, they must stand on their own in the market place. Therefore, the objectives of a United States space station should be based on commercial criteria; otherwise, such a project attracts no long term funding. There is encouraging evidence that some potential space station activities should generate revenues from shuttle related projects within the decade. Materials processing concepts as well as remote sensing indicate substantial potential. Futhermore, the economics and thus the commercial feasibility of such projects will be improved by the operating efficiencies available with an ongoing space station program

Asphericity Can Cause Nonuniform Lithium Intercalation in Battery Active Particles

Uniform intercalation is desired to enable next-generation Li-ion batteries. While we expect nonuniformity in materials undergoing a phase change, single-phase intercalation materials such as nickel manganese cobalt oxide are believed to lithiate uniformly at the particle/electrolyte interface. However, recent imaging reveals nonuniform lithiation. Motivated by this discrepancy, we examine if aspherical particle shape can cause such nonuniformity since the conventional belief is based on spherical particle theory. We obtain real particle geometries using rapid lab-based X-ray computed tomography and subsequently perform physics-based calculations accounting for electrochemical reactions at the particle/electrolyte interface and lithium transport inside the particle bulk. The aspherical geometry breaks the symmetry and causes nonuniform reaction distribution. Such nonuniformity is exacerbated as the particle becomes more aspherical. The proposed mechanism represents a fundamental limit on achievable lithiation uniformity in aspherical particles in the absence of other mechanisms causing inhomogeneity, such as grain structure, nonuniform carbon-binder coating, etc

An Advanced Microstructural and Electrochemical Datasheet on 18650 Li-Ion Batteries with Nickel-Rich NMC811 Cathodes and Graphite-Silicon Anodes

Cylindrical lithium-ion batteries are used across a wide range of applications from spacesuits to automotive vehicles. Specifically, many manufacturers are producing cells in the 18650 geometry i.e. a steel cylinder of diameter and length ca. 18 and 65 mm, respectively. One example is the LG Chem INR18650 MJ1 (nominal values: 3.5 Ah, 3.6 V, 12.2 Wh). This article describes the electrochemical performance and microstructural assembly of such cells, where all the under-pinning data is made openly available for the benefit of the wider community. The charge-discharge capacity is reported for 400 operational cycles via the manufacturer's guidelines along with full-cell, individual electrode coating and particle 3D imaging. Within the electrochemical data, the distinction between protocol transition, beginning-of-life (BoL) capacity loss, and prolonged degradation is outlined and, subsequently, each aspect of the microstructural characterization is broken down into key metrics that may aid in understanding such degradation (e.g. electrode assembly layers, coating thickness, areal loading, particle size and shape). All key information is summarized in a quick-access advanced datasheet in order to provide an initial baseline of information to guide research paths, inform experiments and aid computational modellers

A Dilatometric Study of Graphite Electrodes during Cycling with X-ray Computed Tomography

Graphite is the most commonly used anode material in commercial lithium-ion batteries (LiBs). Understanding the mechanisms driving the dimensional changes of graphite can pave the way to methods for inhibiting degradation pathways and possibly predict electrochemical performance loss. In this study, correlative microscopy tools were used alongside electrochemical dilatometry (ECD) to provide new insights into the dimensional changes during galvanostatic cycling. X-ray computed tomography (CT) provided a morphological perspective of the cycled electrode so that the effects of dilation and contraction on effective diffusivity and electrode pore phase volume fraction could be examined. During the first cycle, the graphite electrode underwent thickness changes close to 9% after lithiation and, moreover, it did not return to its initial thickness after subsequent delithiation. The irreversible dilation increased over subsequent cycles. It is suggested the primary reason for this dilation is electrode delamination. This is supported by the finding that the electrode porosity remained mostly unchanged during cycling, as revealed by X-ray CT

A greyscale erosion algorithm for tomography (GREAT) to rapidly detect battery particle defects

Particle micro-cracking is a major source of performance loss within lithium-ion batteries, however early detection before full particle fracture is highly challenging, requiring time consuming high-resolution imaging with poor statistics. Here, various electrochemical cycling (e.g., voltage cut-off, cycle number, C-rate) has been conducted to study the degradation of Ni-rich NMC811 (LiNi0.8Mn0.1Co0.1O2) cathodes characterized using laboratory X-ray micro-computed tomography. An algorithm has been developed that calculates inter- and intra-particle density variations to produce integrity measurements for each secondary particle, individually. Hundreds of data points have been produced per electrochemical history from a relatively short period of characterization (ca. 1400 particles per day), an order of magnitude throughput improvement compared to conventional nano-scale analysis (ca. 130 particles per day). The particle integrity approximations correlated well with electrochemical capacity losses suggesting that the proposed algorithm permits the rapid detection of sub-particle defects with superior materials statistics not possible with conventional analysis

An Investigation into Creep Cavity Development in 316H Stainless Steel

Creep-induced cavitation is an important failure mechanism in steel components operating at high temperature. Robust techniques are required to observe and quantify creep cavitation. In this paper, the use of two complementary analysis techniques: small-angle neutron scattering (SANS), and quantitative metallography, using scanning electron microscopy (SEM), is reported. The development of creep cavities that is accumulated under uniaxial load has been studied as a function of creep strain and life fraction, by carrying out interrupted tests on two sets of creep test specimens that are prepared from a Type-316H austenitic stainless steel reactor component. In order to examine the effects of pre-strain on creep damage formation, one set of specimens was subjected to a plastic pre-strain of 8%, and the other set had no pre-strain. Each set of specimens was subjected to different loading and temperature conditions, representative of those of current and future power plant operation. Cavities of up to 300 nm in size are quantified by using SANS, and their size distribution, as a function of determined creep strain. Cavitation increases significantly as creep strain increases throughout creep life. These results are confirmed by quantitative metallography analysis

Probing the Structure-Performance Relationship of Lithium-Ion Battery Cathodes Using Pore-Networks Extracted from Three-Phase Tomograms

Pore-scale simulations of Li-ion battery electrodes were conducted using both pore-network modeling and direct numerical simulation. Ternary tomographic images of NMC811 cathodes were obtained and used to create the pore-scale computational domains. A novel network extraction method was developed to manage the extraction of N-phase networks which was used to extract all three phases of NMC-811 electrode along with their interconnections Pore network results compared favorably with direct numerical simulations (DNS) in terms of effective transport properties of each phase but were obtained in significantly less time. Simulations were then conducted with combined diffusion-reaction to simulate the limiting current behavior. It was found that when considering only ion and electron transport, the electrode structure could support current densities about 300 times higher than experimentally observed values. Additional case studies were conducted to illustrate the necessity of ternary images which allow separate consideration of carbon binder domain and active material. The results showed a 24.4% decrease in current density when the carbon binder was treated as a separate phase compared to lumping the CBD and active material into a single phase. The impact of nanoporosity in the carbon binder phase was also explored and found to enhance the reaction rate by 16.8% compared to solid binder. In addition, the developed technique used 58 times larger domain volume than DNS which opens up the possibility of modelling much larger tomographic data sets, enabling representative areas of typically inhomogeneous battery electrodes to be modelled accurately, and proposes a solution to the conflicting needs of high-resolution imaging and large volumes for image-based modelling. For the first time, three-phase pore network modelling of battery electrodes has been demonstrated and evaluated, opening the path towards a new modelling framework for lithium ion batteries.The described here was financially supported by the University of Engineering and Technology Lahore, Pakistan as well as the Natural Science and Engineering Research Council (NSERC) of Canada and in the UK by the Faraday Institution (EP/R042012/1 and EP/R042063/1). Pablo A. García-Salaberri thanks the support from the STFC Early Career Award (ST/R006873/1) during his stay at the Electrochemical Innovation La

Observation of the decay B^0->D+D*-

We report the first observation of the decay B^0->D+-D*-+ with the Belle detector at the KEKB e^+e^- collider operated at the Upsilon(4S) resonance. The sum of branching fractions B(B^0->D+D*-)+B(B^0->D-D*+) is measured to be (1.17+-0.26+0.22-0.25)x10^-3 using the full reconstruction method where both charmed mesons from B^0 decays are reconstructed. A consistent value ((1.48+-0.38+0.28-0.31)x10^-3) is obtained using a partial reconstruction technique that only uses the slow pion from the D*- ->bar D^0pi- decay and a fully reconstructed D+ to reconstruct the B^0.Comment: 10 pages, 3 figure

Evidence for Direct CP Violation in B0 -> K+- pi-+ Decays

We report evidence for direct CP violation in the decay B0 -> K+-pi-+ with 253/fb of data collected with the Belle detector at the KEKB e+e- collider. Using 275 million B B_bar pairs we observe a B -> K+-pi-+ signal with 2140+-53 events. The measured CP violating asymmetry is Acp(K+-pi-+) = -0.101+-0.025 (stat)+-0.005 (syst), corresponding to a significance of 3.9 sigma including systematics. We also search for CP violation in the decays B+- -> K+-pi0 and B+- -> pi+-pi0. The measured CP violating asymmetries are Acp(K+-pi0) = 0.04+-0.05(stat)+-0.02(syst) and Acp(pi+-pi0) = -0.02+-0.10(stat)+-0.01(syst), corresponding to the intervals -0.05 < Acp(K+-pi0) < 0.13 and -0.18<Acp(pi+-pi0)<0.14 at 90% confidence level.Comment: 9 pages, 3 figures. submitted to Physical Review Letter