Simulations of electromagnetic effects in high frequency capacitively coupled discharges using the Darwin approximation

The Darwin approximation is investigated for its possible use in simulation of electromagnetic effects in large size, high frequency capacitively coupled discharges. The approximation is utilized within the framework of two different fluid models which are applied to typical cases showing pronounced standing wave and skin effects. With the first model it is demonstrated that Darwin approximation is valid for treatment of such effects in the range of parameters under consideration. The second approach, a reduced nonlinear Darwin approximation-based model, shows that the electromagnetic phenomena persist in a more realistic setting. The Darwin approximation offers a simple and efficient way of carrying out electromagnetic simulations as it removes the Courant condition plaguing explicit electromagnetic algorithms and can be implemented as a straightforward modification of electrostatic algorithms. The algorithm described here avoids iterative schemes needed for the divergence cleaning and represents a fast and efficient solver, which can be used in fluid and kinetic models for self-consistent description of technical plasmas exhibiting certain electromagnetic activity

Surface Dependent Electron and Negative Ion Density in Inductively Coupled Discharges

Electron and negative ion density have been measured in a modfied Applied Materials DPS metal etch chamber using gas mixtures of BCl{sub 3}, Cl{sub 2} and Ar. Measurements were performed for four dflerent substrate types to examine the influence of surface material on the bulk plasma properties; aluminurq alumina, photoresist and 50 percent patterned aluminum / photoresist. Electron densities in the Cl{sub 2} / BCl{sub 3} mixtures varied from 0.25 to 4 x 10{sup 11} cm{sup -3}. Photodetachment measurements of the negative ion density indicate that the negative ion density was smaller than the electron density and that the electron to negative ion density ratio varied between 1 and 6. The presence of photoresist had a dominant intluence on the electron and negative ion density compared to alumina and aluminum surfaces. In most cases, the electron density above wafers covered with photoresist was a factor of two lower while the negative ion density was a factor of two higher than the aluminum or alumina surfaces

Surface dependent electron and negative ion density in inductively coupled discharges

Electron and negative ion density have been measured in a modfied Applied Materials DPS metal etch chamber using gas mixtures of BCl{sub 3}, Cl{sub 2} and Ar. Measurements were performed for four dflerent substrate types to examine the influence of surface material on the bulk plasma properties; aluminurq alumina, photoresist and 50 percent patterned aluminum / photoresist. Electron densities in the Cl{sub 2} / BCl{sub 3} mixtures varied from 0.25 to 4 x 10{sup 11} cm{sup -3}. Photodetachment measurements of the negative ion density indicate that the negative ion density was smaller than the electron density and that the electron to negative ion density ratio varied between 1 and 6. The presence of photoresist had a dominant intluence on the electron and negative ion density compared to alumina and aluminum surfaces. In most cases, the electron density above wafers covered with photoresist was a factor of two lower while the negative ion density was a factor of two higher than the aluminum or alumina surfaces

Discontinuous metric programming in liquid crystalline elastomers

Liquid crystalline elastomers (LCEs) are shape-changing materials that exhibit large deformations in response to applied stimuli. Local control of the orientation of LCEs spatially directs the deformation of these materials to realize spontaneous shape change in response to stimuli. Prior approaches to shape programming in LCEs utilize patterning techniques that involve the detailed inscription of spatially varying nematic fields to produce sheets. These patterned sheets deform into elaborate geometries with complex Gaussian curvatures. Here, we present an alternative approach to realize shape-morphing in LCEs where spatial patterning of the crosslink density locally regulates the material deformation magnitude on either side of a prescribed interface curve. We also present a simple mathematical model describing the behavior of these materials. Further experiments coupled with the mathematical model demonstrate the control of the sign of Gaussian curvature, which is used in combination with heat transfer effects to design LCEs that self-clean as a result of temperature-dependent actuation properties

The effects of silvicultural activities on wildlife and fish populations in Oregon and the Pacific Northwest : an annotated bibliography from 1960-1999

This annotated bibliography was compiled to provide forest managers with a comprehensive list of sources on the potential effects of silvicultural activities on wildlife and fish populations in Pacific Northwest forests. The bibliography emphasizes publications directly examining silvicultural activities and responses by these populations. Abstracts from 296 publications are indexed by geographic area, forest type, wildlife or fish species, silvicultural activity, and author. In addition, the appendices list 29 general resource references and 70 World Wide Web links. Forest management activities covered in this bibliography include even- and uneven-aged harvesting systems, site preparation, vegetation management, pest control, fertilization, and road construction and use. The focus of this bibliography is the interface between silviculture and management of wildlife and fish habitat in Oregon; however, applicable literature is included from other regions in western North America

The Gaseous Electronics Conference radio‐frequency reference cell: A defined parallel‐plate radio‐frequency system for experimental and theoretical studies of plasma‐processing discharges

A ‘‘reference cell’’ for generating radio‐frequency (rf) glow discharges in gases at a frequency of 13.56 MHz is described. The reference cell provides an experimental platform for comparing plasma measurements carried out in a common reactor geometry by different experimental groups, thereby enhancing the transfer of knowledge and insight gained in rf discharge studies. The results of performing ostensibly identical measurements on six of these cells in five different laboratories are analyzed and discussed. Measurements were made of plasma voltage and current characteristics for discharges in pure argon at specified values of applied voltages, gas pressures, and gas flow rates. Data are presented on relevant electrical quantities derived from Fourier analysis of the voltage and current wave forms. Amplitudes, phase shifts, self‐bias voltages, and power dissipation were measured. Each of the cells was characterized in terms of its measured internal reactive components. Comparing results from different cells provides an indication of the degree of precision needed to define the electrical configuration and operating parameters in order to achieve identical performance at various laboratories. The results show, for example, that the external circuit, including the reactive components of the rf power source, can significantly influence the discharge. Results obtained in reference cells with identical rf power sources demonstrate that considerable progress has been made in developing a phenomenological understanding of the conditions needed to obtain reproducible discharge conditions in independent reference cells.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70394/2/RSINAK-65-1-140-1.pd

A cyclin-binding motif in human papillomavirus type 18 (HPV18) E1^E4 is necessary for association with CDK–cyclin complexes and G2/M cell cycle arrest of keratinocytes, but is not required for differentiation-dependent viral genome amplification or L1 capsid protein expression

Investigation into the effects the HPV E4 protein has in viral life cycleThe G2/M arrest function of human papillomavirus (HPV) E4 proteins is hypothesized to be necessary for viral genome amplification. Full-length HPV18 E1^E4 protein is essential for efficient viral genome amplification. Here we identify key determinants within a CDK-bipartite consensus recognition motif in HPV18 E1^E4 that are critical for association with active CDK–cyclin complexes and in vitro phosphorylation at the predicted CDK phosphorylation site (threonine 23). The optimal cyclin-binding sequence (43RRLL46) within this E4 motif is required for G2/M arrest of primary keratinocytes and correlates with cytoplasmic retention of cyclin B1, but not cyclin A. Disruption of this motif in the E4 ORF of HPV18 genomes, and the subsequent generation of stable cell lines in primary keratinocytes revealed that this motif was not essential for viral genome amplification or L1 capsid protein induction. We conclude that the HPV18 E4 G2/M arrest function does not play a role in early vegetative events

Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating

The grand vision of manufacturing large-area emissive devices with low-cost roll-to-roll coating methods, akin to how newspapers are produced, appeared with the emergence of the organic light-emitting diode about 20 years ago. Today, small organic light-emitting diode displays are commercially available in smartphones, but the promise of a continuous ambient fabrication has unfortunately not materialized yet, as organic light-emitting diodes invariably depend on the use of one or more time- and energy-consuming process steps under vacuum. Here we report an all-solution-based fabrication of an alternative emissive device, a light-emitting electrochemical cell, using a slot-die roll-coating apparatus. The fabricated flexible sheets exhibit bidirectional and uniform light emission, and feature a fault-tolerant >1-μm-thick active material that is doped in situ during operation. It is notable that the initial preparation of inks, the subsequent coating of the constituent layers and the final device operation all could be executed under ambient air

Inkjet Metrology: High-Accuracy Mass Measurements of Microdroplets Produced by a Drop-on-Demand Dispenser

We describe gravimetric methods for measuring the mass of droplets generated by a drop-on-demand (DOD) microdispenser. Droplets are deposited, either continuously at a known frequency or as a burst of known number, into a cylinder positioned on a submicrogram balance. Mass measurements are acquired precisely by computer, and results are corrected for evaporation. Capabilities are demonstrated using isobutyl alcohol droplets. For ejection rates greater than 100 Hz, the repeatability of droplet mass measurements was 0.2%, while the combined relative standard uncertainty (uc) was 0.9%. When bursts of droplets were dispensed, the limit of quantitation was 72 μg (1490 droplets) with uc = 1.0%. Individual droplet size in a burst was evaluated by high-speed videography. Diameters were consistent from the tenth droplet onward, and the mass of an individual droplet was best estimated by the average droplet mass with a combined uncertainty of about 1%. Diameters of the first several droplets were anomalous, but their contribution was accounted for when dispensing bursts. Above the limits of quantitation, the gravimetric methods provided statistically equivalent results and permit detailed study of operational factors that influence droplet mass during dispensing, including the development of reliable microassays and standard materials using DOD technologies

Zinc Coordination Is Required for and Regulates Transcription Activation by Epstein-Barr Nuclear Antigen 1

Epstein-Barr Nuclear Antigen 1 (EBNA1) is essential for Epstein-Barr virus to immortalize naïve B-cells. Upon binding a cluster of 20 cognate binding-sites termed the family of repeats, EBNA1 transactivates promoters for EBV genes that are required for immortalization. A small domain, termed UR1, that is 25 amino-acids in length, has been identified previously as essential for EBNA1 to activate transcription. In this study, we have elucidated how UR1 contributes to EBNA1's ability to transactivate. We show that zinc is necessary for EBNA1 to activate transcription, and that UR1 coordinates zinc through a pair of essential cysteines contained within it. UR1 dimerizes upon coordinating zinc, indicating that EBNA1 contains a second dimerization interface in its amino-terminus. There is a strong correlation between UR1-mediated dimerization and EBNA1's ability to transactivate cooperatively. Point mutants of EBNA1 that disrupt zinc coordination also prevent self-association, and do not activate transcription cooperatively. Further, we demonstrate that UR1 acts as a molecular sensor that regulates the ability of EBNA1 to activate transcription in response to changes in redox and oxygen partial pressure (pO2). Mild oxidative stress mimicking such environmental changes decreases EBNA1-dependent transcription in a lymphoblastoid cell-line. Coincident with a reduction in EBNA1-dependent transcription, reductions are observed in EBNA2 and LMP1 protein levels. Although these changes do not affect LCL survival, treated cells accumulate in G0/G1. These findings are discussed in the context of EBV latency in body compartments that differ strikingly in their pO2 and redox potential