A new MOF-5 homologue for selective separation of methane from C₂ hydrocarbons at room temperature

A new MOF-5 homologue compound UTSA-10 has been obtained under solvothermal conditions from a mixture of Zn(NO3)2⋅6H2O and commercially available linker, 2-methylfumaric acid, in N,N-dimethylformamide. The moderate surface area and suitable pore sizes enable the activated UTSA-10a to separate methane from C2 hydrocarbons at room temperature

Progress of Surface Science Studies on ABX(3)-Based Metal Halide Perovskite Solar Cells

ABX(3) type metal halide perovskite solar cells (PSCs) have shown efficiencies over 25%, rocketing toward their theoretical limit. To gain the full potential of PSCs relies on the understanding of the device working mechanisms and recombination, the material quality, and the match of energy levels in the device stacks. In this review, the importance of designing PSCs from the viewpoint of surface/interface science studies is presented. For this purpose, recent case studies are discussed to demonstrate how probing of local heterogeneities (e.g., grains, grain boundaries, atomic structure, etc.) in perovskites by surface science techniques can help correlate material properties and PSC device performance. At the solar cell device level with active areas larger than millimeter scale, the ensemble average measurement techniques can characterize the overall average properties of perovskite films as well as their adjacent layers and provide clues to understand better the solar cell parameters. How generation and healing of electronic defects in perovskite films limit the device efficiency, reproducibility, and stability, and induce the time-dependent transient behavior in the current-voltage curves are also the central focus of this review. On the basis of these studies, strategies to further improve efficiency and stability, as well as reducing hysteresis are presented

Hybrid chemical vapor deposition enables scalable and stable Cs-FA mixed cation perovskite solar modules with a designated area of 91.8 cm2 approaching 10% efficiency

The development of scalable deposition methods for stable perovskite layers is a prerequisite for the development and future commercialization of perovskite solar modules. However, there are two major challenges, i.e., scalability and stability. In sharp contrast to a previous report, here we develop a fully vapor based scalable hybrid chemical vapor deposition (HCVD) process for depositing Cs-formamidinium (FA) mixed cation perovskite films, which alleviates the problem encountered when using conventional solution coating of mainly methylammonium lead iodide (MAPbI3). Using our HCVD method, we fabricate perovskite films of Cs0.1FA0.9PbI2.9Br0.1 with enhanced thermal and phase stabilities, by the intimate incorporation of Cs into FA based perovskite films. In addition, the SnO2 electron transport layer (ETL) (prepared by sputter deposition) is found to be damaged during the HCVD process. In combination with precise interface engineering of the SnO2 ETL, we demonstrate relatively large area solar modules with efficiency approaching 10% and with a designated area of 91.8 cm2 fabricated on 10 cm × 10 cm substrates (14 cells in series). On the basis of our preliminary operational stability tests on encapsulated perovskite solar modules, we extrapolated that the T80 lifetime is approximately 500 h (under the light illumination of 1 sun and 25 °C)

The Impact of Atmosphere on Energetics of Lead Halide Perovskites

Solar cells based on metal halide perovskites have emerged as a promising low-cost photovoltaic technology. In contrast to inert atmospheres where most of the lab-scale devices are made to date, large-area low-cost production of perovskite solar cells often involves processing of perovskites in various atmospheres including ambient air, nitrogen, and/or vacuum. Herein, the impact of atmosphere on the energy levels of methylammonium lead halide perovskite films is systematically investigated. The atmosphere is varied to simulate the typical fabrication process. Through a comprehensive analysis combining the Fermi level evolution, surface photovoltage, photoluminescence properties, photovoltaic performance, and device simulation, an overall landscape of the energy diagram of the perovskite layer is able to be determined. The findings have direct implications for real-world devices under typical atmospheres, and provide insights into the fabrication-process design and optimization. Furthermore, a universal Fermi level shift under vacuum for lead halide-based perovskites revealed in this study, urges a refreshed view on the energetics studies conducted without considering the atmospheric effect

A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability

The upscaling of perovskite solar cells to module scale and long-term stability have been recognized as the most important challenges for the commercialization of this emerging photovoltaic technology. In a perovskite solar module, each interface within the device contributes to the efficiency and stability of the module. Here, we employed a holistic interface stabilization strategy by modifying all the relevant layers and interfaces, namely the perovskite layer, charge transporting layers and device encapsulation, to improve the efficiency and stability of perovskite solar modules. The treatments were selected for their compatibility with low-temperature scalable processing and the module scribing steps. Our unencapsulated perovskite solar modules achieved a reverse-scan efficiency of 16.6% for a designated area of 22.4 cm². The encapsulated perovskite solar modules, which show efficiencies similar to the unencapsulated one, retained approximately 86% of the initial performance after continuous operation for 2,000 h under AM1.5G light illumination, which translates into a T₉₀ lifetime (the time over which the device efficiency reduces to 90% of its initial value) of 1,570 h and an estimated T80 lifetime (the time over which the device efficiency reduces to 80% of its initial value) of 2,680 h

Enhanced CO 2

A new NbO-type metal-organic framework ZJNU-40 incorporating highly polarized benzothiadiazole moieties exhibits a high CO2 uptake of 108 cm(3) g(-1) at 296 K and 1 atm, as well as good adsorption selectivities of CO2 over CH4 and N-2 at room temperature, which is superior to that of the analogous MOF NOTT-101

Ultrahigh mobility and efficient charge injection in monolayer organic thin-film transistors on boron nitride

Organic thin-film transistors (OTFTs) with high mobility and low contact resistance have been actively pursued as building blocks for low-cost organic electronics. In conventional solution-processed or vacuum-deposited OTFTs, due to interfacial defects and traps, the organic film has to reach a certain thickness for efficient charge transport. Using an ultimate monolayer of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) molecules as an OTFT channel, we demonstrate remarkable electrical characteristics, including intrinsic hole mobility over 30 cm2/Vs, Ohmic contact with 100 Ω · cm resistance, and band-like transport down to 150 K. Compared to conventional OTFTs, the main advantage of a monolayer channel is the direct, nondisruptive contact between the charge transport layer and metal leads, a feature that is vital for achieving low contact resistance and current saturation voltage. On the other hand, bilayer and thicker C8-BTBT OTFTs exhibit strong Schottky contact and much higher contact resistance but can be improved by inserting a doped graphene buffer layer. Our results suggest that highly crystalline molecular monolayers are promising form factors to build high-performance OTFTs and investigate device physics. They also allow us to precisely model how the molecular packing changes the transport and contact properties