1,111 research outputs found
Multiple Sample Cryostat for the Determination of Superconductor Properties
Cryostats which are currently used to characterize the properties of superconductors between 4 K and 100 K are primarily single sample devices. The purpose of this paper is to present an instrument design which can hold up to five (5) one cm. diameter samples at a stable temperature (+ /-0.1K) within the above range specified while measurements of the sample properties are made
Best Practices for Chiropractic Care of Children: A Consensus Update
AbstractObjectiveChiropractic care is the most common complementary and integrative medicine practice used by children in the United States, and it is used frequently by children internationally as well. The purpose of this project was to update the 2009 recommendations on best practices for chiropractic care of children.MethodsA formal consensus process was completed based on the existing recommendations and informed by the results of a systematic review of relevant literature from January 2009 through March 2015. The primary search question for the systematic review was, “What is the effectiveness of chiropractic care, including spinal manipulation, for conditions experienced by children (<18 years of age)?” A secondary search question was, “What are the adverse events associated with chiropractic care including spinal manipulation among children (<18 years of age)?” The consensus process was conducted electronically, by e-mail, using a multidisciplinary Delphi panel of 29 experts from 5 countries and using the RAND Corporation/University of California, Los Angeles, consensus methodology.ResultsOnly 2 statements from the previous set of recommendations did not reach 80% consensus on the first round, and revised versions of both were agreed upon in a second round.ConclusionsAll of the seed statements in this best practices document achieved a high level of consensus and thus represent a general framework for what constitutes an evidence-based and reasonable approach to the chiropractic management of infants, children, and adolescents
Solid State NMR of Hydrogen in Thin Film Synthetic Diamond
Thin film synthetic diamond promises to be the next semiconductor material, if the manufacturing processes which produce it can be controlled. Solid state nuclear magnetic resonance (NMR) using magic angle spinning (MAS) is used to measure the content of hydrogen in diamond which controls the resistivity of the diamond thin films. Spectral results are presented for proton NMR of thin film synthetic diamond. Experimental calibration techniques using BaF2 as the hydrogen standard will be discussed, as well as acquisition times, pulsing sequences, spinning rates, and rotor composition
Numerical Determination of Critical Conditions for Thermal Ignition
The determination of ignition or thermal explosion in an oxidizing porous body of material, as described by a dimensionless reaction-diffusion equation of the form .tu = .2u + .e-1/u over the bounded region O, is critically reexamined from a modern perspective using numerical methodologies. First, the classic stationary model is revisited to establish the proper reference frame for the steady-state solution space, and it is demonstrated how the resulting nonlinear two-point boundary value problem can be reexpressed as an initial value problem for a system of first-order differential equations, which may be readily solved using standard algorithms. Then, the numerical procedure is implemented and thoroughly validated against previous computational results based on sophisticated path-following techniques. Next, the transient nonstationary model is attacked, and the full nonlinear form of the reaction-diffusion equation, including a generalized convective boundary condition, is discretized and expressed as a system of linear algebraic equations. The numerical methodology is implemented as a computer algorithm, and validation computations are carried out as a prelude to a broad-ranging evaluation of the assembly problem and identification of the watershed critical initial temperature conditions for thermal ignition. This numerical methodology is then used as the basis for studying the relationship between the shape of the critical initial temperature distribution and the corresponding spatial moments of its energy content integral and an attempt to forge a fundamental conjecture governing this relation. Finally, the effects of dynamic boundary conditions on the classic storage problem are investigated and the groundwork is laid for the development of an approximate solution methodology based on adaptation of the standard stationary model
From Earth to Orbit: An assessment of transportation options
The report assesses the requirements, benefits, technological feasibility, and roles of Earth-to-Orbit transportation systems and options that could be developed in support of future national space programs. Transportation requirements, including those for Mission-to-Planet Earth, Space Station Freedom assembly and operation, human exploration of space, space science missions, and other major civil space missions are examined. These requirements are compared with existing, planned, and potential launch capabilities, including expendable launch vehicles (ELV's), the Space Shuttle, the National Launch System (NLS), and new launch options. In addition, the report examines propulsion systems in the context of various launch vehicles. These include the Advanced Solid Rocket Motor (ASRM), the Redesigned Solid Rocket Motor (RSRM), the Solid Rocket Motor Upgrade (SRMU), the Space Shuttle Main Engine (SSME), the Space Transportation Main Engine (STME), existing expendable launch vehicle engines, and liquid-oxygen/hydrocarbon engines. Consideration is given to systems that have been proposed to accomplish the national interests in relatively cost effective ways, with the recognition that safety and reliability contribute to cost-effectiveness. Related resources, including technology, propulsion test facilities, and manufacturing capabilities are also discussed
Controllability and Design of Unmanned Multirotor Aircraft Robust to Rotor Failure
A new design method for multi-rotor aircraft with distributed electric propulsion is presented
to ensure a property of robustness against rotor failure from the control perspective. Based on the concept of null controllability, a quality measure is derived to evaluate and quantify the performance of a given design with the consideration of rotor failure. An optimization
problem whose cost function is based on the quality measure is formulated and its optimal solution identifies a set of optimal design parameters that maximizes an aircraft’s ability to control its attitude and hence its position. The effectiveness of the proposed design procedure
is validated through the results of experimentation with the Autonomous Flying Ambulance model being developed at Caltech’s Center for Autonomous Systems and Technologies
Recommended from our members
Materials Performance in USC Steam
The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C)
Adhesion Molecule Expression in Polymorphic Light Eruption
Endothelial leukocyte adhesion molecule-1 (ELAM-1), vascular cell adhesion molecule-1 (VCAM-1), and intercellular adhesion molecule-1 (ICAM-1) are cytokine-regulated cell-surface Ieukocyte adhesion molecules. We have investigated the in vivo kinetics and pattern of expression of these adhesion molecules in relation to tissue accumulation of leukocytes in the photodermatosis, polymorphic light eruption (PMLE), which is characterized by dense perivascular leukocytic infiltration. Immunohistology was performed on biopsies taken at varying time points from PMLE lesions induced in 11 subjects by suberythemal solar simulated irradiation. Vascular endothelial ELAM-1 expression was first observed at 5 h, maximal at 24 to 72 h, and remained elevated at 6 d. VCAM-1, minimally expressed in control skin, was induced above background levels on endothelium and some perivascular cells after 24h and maintained at 6 d. Endothelial cell ICAM-1 expression was increased above control levels at 72h and 6 d. Keratinocyte ICAM-1 expression, most marked overlying areas of dermal leukocytic infiltration, began at 5h and was strong at 72h and 6 d. In addition to lymphocytes, significant number of neutrophils of but not eosinophils were detected in the dermal leukocytic infiltrate that appeared at 5h and persisted at 6 d. The pattern of adhesion molecule expression that we have observed is similar to that seen in normal skin during a delayed hypersensitivity reaction: These observations support an immunologic basis for PMLE
Recommended from our members
Relations between vegetation and environment
p.28-44 from Analysis of coniferous forest ecosystems in the Western United States
Recommended from our members
Cast Alloys for Advanced Ultra Supercritical Steam Turbines
The proposed steam inlet temperature in the Advanced Ultra Supercritical (A-USC) steam turbine is high enough (760 °C) that traditional turbine casing and valve body materials such as ferritic/martensitic steels will not suffice due to temperature limitations of this class of materials. Cast versions of several traditionally wrought Ni-based superalloys were evaluated for use as casing or valve components for the next generation of industrial steam turbines. The full size castings are substantial: 2-5,000 kg each half and on the order of 100 cm thick. Experimental castings were quite a bit smaller, but section size was retained and cooling rate controlled to produce equivalent microstructures. A multi-step homogenization heat treatment was developed to better deploy the alloy constituents. The most successful of these cast alloys in terms of creep strength (Haynes 263, Haynes 282, and Nimonic 105) were subsequently evaluated by characterizing their microstructure as well as their steam oxidation resistance (at 760 and 800 °C)
- …