Imaging, Spectroscopy, Mechanical, Alignment and Biocompatibility Studies of Electrospun Medical Grade Polyurethane (Carbothane™ 3575A) Nanofibers and Composite Nanofibers Containing Multiwalled Carbon Nanotubes

In the present study, we discuss the electrospinning of medical grade polyurethane (Carbothane™ 3575A) nanofibers containing multi-walled-carbon-nanotubes (MWCNTs). A simple method that does not depend on additional foreign chemicals has been employed to disperse MWCNTs through high intensity sonication. Typically, a polymer solution consisting of polymer/MWCNTs has been electrospun to form nanofibers. Physiochemical aspects of prepared nanofibers were evaluated by SEM, TEM, FT-IR and Raman spectroscopy, confirming nanofibers containing MWCNTs. The biocompatibility and cell attachment of the produced nanofiber mats were investigated while culturing them in the presence of NIH 3T3 fibroblasts. The results from these tests indicated non-toxic behavior of the prepared nanofiber mats and had a significant attachment of cells towards nanofibers. The incorporation of MWCNTs into polymeric nanofibers led to an improvement in tensile stress from 11.40 ± 0.9 to 51.25 ± 5.5 MPa. Furthermore, complete alignment of the nanofibers resulted in an enhancement on tensile stress to 72.78 ± 5.5 MPa. Displaying these attributes of high mechanical properties and non-toxic nature of nanofibers are recommended for an ideal candidate for future tendon and ligament grafts

Preparation, characterization, and cytotoxicity of CPT/Fe2O3-embedded PLGA ultrafine composite fibers: a synergistic approach to develop promising anticancer material

Vide

Imaging, Spectroscopic, Mechanical and Biocompatibility Studies of Electrospun Tecoflex® EG 80A Nanofibers and Composites Thereof Containing Multiwalled Carbon Nanotubes

The present study discusses the design, development and characterization of electrospun Tecoflex® EG 80A class of polyurethane nanofibers and the incorporation of multiwalled carbon nanotubes (MWCNTs) to these materials. Scanning electron microscopy results confirmed the presence of polymer nanofibers, which showed a decrease in fiber diameter at 0.5% wt. and 1% wt. MWCNTs loadings, while transmission electron microscopy showed evidence of the MWCNTs embedded within the polymer matrix. The fourier transform infrared spectroscopy and Raman spectroscopy were used to elucidate the polymer-MWCNTs intermolecular interactions, indicating that the C-N and N-H bonds in polyurethanes are responsible for the interactions with MWCNTs. Furthermore, tensile testing indicated an increase in the Young’s modulus of the nanofibers as the MWCNTs concentration was increased. Finally, NIH 3T3 fibroblasts were seeded on the obtained nanofibers, demonstrating cell biocompatibility and proliferation. Therefore, the results indicate the successful formation of polyurethane nanofibers with enhanced mechanical properties, and demonstrate their biocompatibility, suggesting their potential application in biomedical area

Morphological and Electrochemical Properties of Crystalline Praseodymium Oxide Nanorods

Highly crystalline Pr6O11 nanorods were prepared by a simple precipitation method of triethylamine complex at 500°C. Synthesized Pr6O11 nanorods were uniformly grown with the diameter of 12–15 nm and the length of 100–150 nm without any impurities of unstable PrO2 phase. The Pr6O11 nanorod electrodes attained a high electrical conductivity of 0.954 Scm−1 with low activation energy of 0.594 eV at 850°C. The electrochemical impedance study showed that the resistance of electrode was significantly decreased at high temperature, which resulted from its high conductivity and low activation energy. The reduced impedance and high electrical conductivity of Pr6O11 nanorod electrodes are attributed to the reduction of grain boundaries and high space charge width

Ultrathin conformal coating of apatite nanostructures onto electrospun nylon 6 nanofibers: mimicking the extracellular matrix

A hydrothermal approach was used to prepare large-scale, aligned ultrafine bone-like apatite nanorod arrays on electrospun nylon 6 (N6) nanofibers using simulated body fluid. X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectoron spectroscopy and Fourier transform infrared spectroscopy (FTIR) were used to study structural features and the chemical composition of the synthesized biocomposites. Apatite nanorods of similar to 60 nm length and 10-17 nm width were uniformly distributed onto the surface of individual nanofibers. Deposition of apatite on pristine nanofiber surfaces at an initial pH of 6.5-7.5 accelerated when the reaction time was extended. Nanofibers and the ultrathin fibers that generated a spiderweb-like structure after coating maintained a unique fibrous morphology. FTIR and thermal analysis demonstrated strong intermolecular hydrogen bonding between the polymer molecules and mineralized compounds from the hydrothermal reaction. Our results also indicated a change in the chain conformation of the N6 backbone from the fabrication process. Thus, our investigation found that the hydrothermal process did not notably degrade the N6, but transformed it from a metastable gamma-form to thermodynamically stable chain conformation (alpha-form). Further, the biological response induced by the surface modifications of N6 nanofibers was studied by in vitro cell culture with MC3T3-E1 osteoblasts cells. (C) 2013 Elsevier B.V. All rights reserved

Chitosan-Functionalized Hydroxyapatite-Cerium Oxide Heterostructure: An Efficient Adsorbent for Dyes Removal and Antimicrobial Agent

The current research intended to employ a facile and economical process, which is also ecofriendly to transform camel waste bones into novel heterostructure for cleansing of diverse waste waters. The bones of camel were utilized for preparation of hydroxyapatite by hydrothermal method. The prepared hydroxyapatite was applied to the synthesis of cerium oxide-hydroxyapatite coated with natural polymer chitosan (CS-HAP-CeO2) heterostructure. Being abundant natural polymer polysaccharide, chitosan possesses exceptional assets such as accessibility, economic price, hydrophilicity, biocompatibility as well as biodegradability, therefore style it as an outstanding adsorbent for removing colorant and other waste molecules form water. This heterostructure was characterized by various physicochemical processes such as XRD, SEM-EDX, TEM, and FT-IR. The CS-HAP-CeO2 was screened for adsorption of various industrially important dyes, viz., Brilliant blue (BB), Congo red (CR), Crystal violet (CV), Methylene blue (MB), Methyl orange (MO), and Rhodamine B (RB) which are collective pollutants of industrial waste waters. The CS-HAP-CeO2 demonstrated exceptional adsorption against CR dye. The adsorption/or removal efficiency ranges are BB (11.22%), CR (96%), CV (28.22%), MB (47.74%), MO (2.43%), and RB (58.89%) dyes. Moreover, this heterostructure showed excellent bacteriostatic potential for E. coli, that is liable for serious waterborne diseases. Interestingly, this work revealed that the incorporation of cerium oxide and chitosan into hydroxyapatite substantially strengthened antimicrobial and adsorption capabilities than those observed in virgin hydroxyapatite. Herein, we recycled the unwanted camel bones into a novel heterostructure, which assists to reduce water pollution, mainly caused by the dye industries

Imaging, spectroscopy, mechanical, alignment and biocompatibility studies of electrospun medical grade polyurethane (Carbothane™ 3575A) nanofibers and composite nanofibers containing multiwalled carbon nanotubes

In the present study, we discuss the electrospinning of medical grade polyurethane (Carbothane™ 3575A) nanofibers containing multi-walled-carbon-nanotubes (MWCNTs). A simple method that does not depend on additional foreign chemicals has been employed to disperse MWCNTs through high intensity sonication. Typically, a polymer solution consisting of polymer/MWCNTs has been electrospun to form nanofibers. Physiochemical aspects of prepared nanofibers were evaluated by SEM, TEM, FT-IR and Raman spectroscopy, confirming nanofibers containing MWCNTs. The biocompatibility and cell attachment of the produced nanofiber mats were investigated while culturing them in the presence of NIH 3T3 fibroblasts. The results from these tests indicated non-toxic behavior of the prepared nanofiber mats and had a significant attachment of cells towards nanofibers. The incorporation of MWCNTs into polymeric nanofibers led to an improvement in tensile stress from 11.40±0.9 to 51.25±5.5. MPa. Furthermore, complete alignment of the nanofibers resulted in an enhancement on tensile stress to 72.78±5.5. MPa. Displaying these attributes of high mechanical properties and non-toxic nature of nanofibers are recommended for an ideal candidate for future tendon and ligament grafts

Manganese Ferrite–Hydroxyapatite Nanocomposite Synthesis: Biogenic Waste Remodeling for Water Decontamination

Environmental pollution, especially water pollution caused by dyes, heavy metal ions and biological pathogens, is a root cause of various lethal diseases in human-beings and animals. Water purification materials and treatment methods are overpriced. Consequently, there is an imperative outlook observance for cheap materials for the purification of wastewaters. In order to fill up the projected demand for clean water, the present study aimed to make use of cost-effective and environmentally friendly methods to convert bone-waste from animals such as cows into novel composites for the decontamination of water. The bone-waste of slaughtered cows from the Najran region of Saudi Arabia was collected and used for the synthesis of hydroxyapatite based on the thermal method. The synthesized hydroxyapatite (Ca10(PO4)6(OH)2) was utilized to prepare a manganese ferrite/hydroxyapatite composite. The nanocomposite was categorized by diverse sophisticated procedures, for instance XRD, FE-SEM, EDX, TEM, UV, PL and FT-IR. This composite possesses outstanding photocatalytic activity against methylene blue dye, which is a common pollutant from industrial wastes. Moreover, the synthesised composite revealed exceptional bacteriostatic commotion towards E. coli and S. aureus bacteria, which are accountable for acute waterborne infections. The outcome of this study demonstrated that the integration of manganese ferrite into hydroxyapatite significantly intensified both antimicrobial and photocatalytic actions when compared to the virgin hydroxyapatite

Inactivation of pathogenic Klebsiella pneumoniae by CuO/TiO2 nanofibers: a multifunctional nanomaterial via one-step electrospinning

The fabrication and characterization of one-dimensional CuO/TiO nanofibers with high photocatalytic and antibacterial activities are presented. The CuO/TiO nanofibers were prepared by electrospinning of colloid composed of titanium isopropoxide, poly(vinylpyrroliodine) (PVP) and copper nanoparticles and calcination at 700°C in air for 1 h. The antibacterial activity was tested using Klebsiella pneumoniae as model organism by calculation of the minimum inhibitory concentration (MIC). The obtained CuO/TiO nanofibers showed prominent photocatalytic activity under visible light to degrade reactive black5 and reactive orange16 dyes in aqueous solutions and effectively catalyze K. pneumoniae inactivation. The decomposition process of the cell wall and cell membrane was directly observed by TEM analysis after the exposure of the K. pneumoniae to the nanofibers. Interestingly, the introduced photocatalyst can be reused with the same photocatalytic activity. Overall, the combination of CuO and TiO can be synergistic and resulted in CuO/TiO composite nanofibers having superior photocatalytic and antimicrobial potential to impede K. pneumoniae growth which causes bacterium to die ultimately

Imaging, spectroscopy, mechanical, alignment and biocompatibility studies of electrospun medical grade polyurethane (Carbothane™ 3575A) nanofibers and composite nanofibers containing multiwalled carbon nanotubes

In the present study, we discuss the electrospinning of medical grade polyurethane (Carbothane(™) 3575A) nanofibers containing multi-walled-carbon-nanotubes (MWCNTs). A simple method that does not depend on additional foreign chemicals has been employed to disperse MWCNTs through high intensity sonication. Typically, a polymer solution consisting of polymer/MWCNTs has been electrospun to form nanofibers. Physiochemical aspects of prepared nanofibers were evaluated by SEM, TEM, FT-IR and Raman spectroscopy, confirming nanofibers containing MWCNTs. The biocompatibility and cell attachment of the produced nanofiber mats were investigated while culturing them in the presence of NIH 3T3 fibroblasts. The results from these tests indicated non-toxic behavior of the prepared nanofiber mats and had a significant attachment of cells towards nanofibers. The incorporation of MWCNTs into polymeric nanofibers led to an improvement in tensile stress from 11.40 ± 0.9 to 51.25 ± 5.5 MPa. Furthermore, complete alignment of the nanofibers resulted in an enhancement on tensile stress to 72.78 ± 5.5 MPa. Displaying these attributes of high mechanical properties and non-toxic nature of nanofibers are recommended for an ideal candidate for future tendon and ligament grafts