Layer manufacturing for in vivo devices

Traditional in vivo devices fabricated to be used as implantation devices included sutures, plates, pins, screws, and joint replacement implants. Also, akin to developments in regenerative medicine and drug delivery, there has been the pursuit of less conventional in vivo devices that demand complex architecture and composition, such as tissue scaffolds. Commercial means of fabricating traditional devices include machining and moulding processes. Such manufacturing techniques impose considerable lead times and geometrical limitations, and restrict the economic production of customized products. Attempts at the production of non-conventional devices have included particulate leaching, solvent casting, and phase transition. These techniques cannot provide the desired total control over internal architecture and compositional variation, which subsequently restricts the application of these products. Consequently, several parties are investigating the use of freeform layer manufacturing techniques to overcome these difficulties and provide viable in vivo devices of greater functionality. This paper identifies the concepts of rapid manufacturing (RM) and the development of biomanufacturing based on layer manufacturing techniques. Particular emphasis is placed on the development and experimentation of new materials for bio-RM, production techniques based on the layer manufacturing concept, and computer modelling of in vivo devices for RM techniques

Evaluation of CO2 and Nd:YAG lasers for the selective laser sintering of HAPEX®

This paper evaluates and compares the performance of a CO2 and Nd:YAG laser for the selective laser sintering (SLS) of a commercial hydroxyapatite reinforced polyethylene (HA-HDPE) bioactive ceramic polymer composite material. Single-line and layer specimens were produced to compare the effects of different lasers on the material sintering. It was found that the processing window was much larger for the CO2 laser as compared to the Nd:YAG laser. Furthermore, the Nd:YAG processing window was highly dependent on the pulse width and pulse repetition rate parameter settings. Furthermore, the processing windows for both the laser systems were affected by the particle size of the HA-HDPE powders. The degree and mechanism of particle fusion existing in the composites layers were greatly influenced by the laser source and particle size. The results presented in this work clearly indicate that the CO2 laser would present a better performance than the Nd:YAG laser for the SLS of HAPEX® in terms of operation range, speed, processing efficiency, and, subsequently, greater potential as an SLS processing method for bioactive implant products

Selective laser sintering of hydroxyapatite reinforced polyethylene composites for bioactive implants and tissue scaffold development

Selective laser sintering (SLS) has been investigated for the production of bioactive implants and tissue scaffolds using composites of high-density polyethylene (HDPE) reinforced with hydroxyapatite (HA) with the aim of achieving the rapid manufacturing of customized implants. Single-layer and multilayer block specimens made of HA-HDPE composites with 30 and 40 vol % HA were sintered successfully using a CO2 laser sintering system. Laser power and scanning speed had a significant effect on the sintering behaviour. The degree of particle fusion and porosity were influenced by the laser processing parameters, hence control can be attained by varying these parameters. Moreover, the SLS processing allowed exposure of HA particles on the surface of the composites and thereby should provide bioactive products. Pores existed in the SLS-fabricated composite parts and at certain processing parameters a significant fraction of the pores were within the optimal sizes for tissue regeneration. The results indicate that the SLS technique has the potential not only to fabricate HA-HDPE composite products but also to produce appropriate features for their application as bioactive implants and tissue scaffolds

Efficient Raman Sideband Generation in a Coherent Atomic Medium

We demonstrate the efficient generation of Raman sidebands in a medium coherently prepared in a dark state by continuous-wave low-intensity laser radiation. Our experiment is performed in sodium vapor excited in $\Lambda$ configuration on the D$_{1}$ line by two laser fields of resonant frequencies $\omega_{1}$ and $\omega_{2}$, and probed by a third field $$. First-order sidebands for frequencies $\omega_{1}$, $\omega_{2}$ and up to the third-order sidebands for frequency $\omega_{3}$ are observed. The generation starts at a power as low as 10 microwatt for each input field. Dependencies of the intensities of both input and generated waves on the frequency difference ($\omega_{1}-\omega_{2}$), on the frequency $\omega_{3}$ and on the optical density are investigated.Comment: 7 pages, 6 figure

Characterization of ENU-induced mutations in red blood cell structural proteins

Murine models with modified gene function as a result of N-ethyl-N-nitrosourea (ENU) mutagenesis have been used to study phenotypes resulting from genetic change. This study investigated genetic factors associated with red blood cell (RBC) physiology an

Slow Light in Doppler Broadened Two level Systems

We show that the propagation of light in a Doppler broadened medium can be slowed down considerably eventhough such medium exhibits very flat dispersion. The slowing down is achieved by the application of a saturating counter propagating beam that produces a hole in the inhomogeneous line shape. In atomic vapors, we calculate group indices of the order of 10^3. The calculations include all coherence effects.Comment: 6 pages, 5 figure

A Knob for Changing Light Propagation from Subluminal to Superluminal

We show how the application of a coupling field connecting the two lower metastable states of a lambda-system can produce a variety of new results on the propagation of a weak electromagnetic pulse. In principle the light propagation can be changed from subluminal to superluminal. The negative group index results from the regions of anomalous dispersion and gain in susceptibility.Comment: 6 pages,5 figures, typed in RevTeX, accepted in Phys. Rev.

Coupled cavities for enhancing the cross-phase modulation in electromagnetically induced transparency

We propose an optical double-cavity resonator whose response to a signal is similar to that of an Electromagnetically Induced Transparency (EIT) medium. A combination of such a device with a four-level EIT medium can serve for achieving large cross-Kerr modulation of a probe field by a signal field. This would offer the possibility of building a quantum logic gate based on photonic qubits. We discuss the technical requirements that are necessary for realizing a probe-photon phase shift of Pi caused by a single-photon signal. The main difficulty is the requirement of an ultra-low reflectivity beamsplitter and to operate a sufficiently dense cool EIT medium in a cavity.Comment: 10 pages, 5 figures, REVTeX, to appear in Phys. Rev. A (v2 - minor changes in discussion of experimental conditions

Effects of material morphology and processing conditions on the characteristics of hydroxyapatite and high-density polyethylene biocomposites by selective laser sintering

Hydroxyapatite (HA), a ceramic to which bone inherently bonds, incorporated into a polymer matrix enhances the bioactivity of implants. In order to rapid-manufacture bioactive implants, selective laser sintering (SLS) has been used to fabricate HA and high-density polyethylene (HDPE) composite (HA-HDPE). The properties of SLS-fabricated specimens have been investigated. The main aspects to be considered in the SLS technology are the properties of the materials used in the process and processing parameters (PPs). HA-HDPE composite specimens have been fabricated using five different powders with variations in particle size (PS), PS distribution, and five different laser PPs. The sintering height, the width, and the shrinkage of the specimens were determined and the effects of the particles and PPs on the physical properties were investigated. The HA-HDPE specimens were found to be highly porous and the sintered density and porosity of the specimens were influenced by the PS and PPs. The interparticle connectivity and the pore size range of the specimens were found to be predominantly determined by the PS and to a lesser extent also influenced by the PPs. The strength of these specimens and the relationship with porosity are discussed

Rotational and Vibrational Dynamics of Interstitial Molecular Hydrogen

The calculation of the hindered roton-phonon energy levels of a hydrogen molecule in a confining potential with different symmetries is systematized for the case when the rotational angular momentum $J$ is a good quantum number. One goal of this program is to interpret the energy-resolved neutron time of flight spectrum previously obtained for H$_{2}$C$_{60}$. This spectrum gives direct information on the energy level spectrum of H$_2$ molecules confined to the octahedral interstitial sites of solid C$_{60}$. We treat this problem of coupled translational and orientational degrees of freedom a) by construction of an effective Hamiltonian to describe the splitting of the manifold of states characterized by a given value of $J$ and having a fixed total number of phonon excitations, b) by numerical solutions of the coupled translation-rotation problem on a discrete mesh of points in position space, and c) by a group theoretical symmetry analysis. Results obtained from these three different approaches are mutually consistent. The results of our calculations explain several hitherto uninterpreted aspects of the experimental observations, but show that a truly satisfactory orientational potential for the interaction of an H$_2$ molecule with a surrounding array of C atoms has not yet been developed.Comment: 53 pages, 9 figures, to appear in Phys. Rev B (in press). Phys. Rev. B (in press