70 research outputs found
Synchronous photoinjection using a frequency-doubled gain-switched fiber-coupled seed laser and ErYb-doped fiber amplifier
Light at 1560 nm from a gain-switched fiber-coupled diode laser and ErYb-doped fiber amplifier was frequency doubled to obtain over 2 Waverage power at 780 nm with ~40 ps pulses and pulse repetition rate of 499 MHz. This light was used to drive the 100 kV DC high voltage GaAs photoemission gun at the Continuous Electron Beam Accelerator Facility at Jefferson Laboratory to produce a high average current beam (100 μA) of highly spin-polarized electrons ( \u3e 80%). This new drive-laser system represents a significant advance over laser systems used previously, providing significantly higher power and enhanced reliability
Synchronous photoinjection using a frequency-doubled gain-switched fiber-coupled seed laser and ErYb-doped fiber amplifier
Light at 1560 nm from a gain-switched fiber-coupled diode laser and ErYb-doped fiber amplifier was frequency doubled to obtain over 2 Waverage power at 780 nm with ~40 ps pulses and pulse repetition rate of 499 MHz. This light was used to drive the 100 kV DC high voltage GaAs photoemission gun at the Continuous Electron Beam Accelerator Facility at Jefferson Laboratory to produce a high average current beam (100 μA) of highly spin-polarized electrons ( \u3e 80%). This new drive-laser system represents a significant advance over laser systems used previously, providing significantly higher power and enhanced reliability
New Records for Cubanocuma gutzui Băcescu and Muradian, 1977 (Crustacea: Cumacea: Nannastacidae) from the Western Atlantic
Because the original description and many subsequent records for Cubanocuma gutzui have appeared in a Romanian journal, Travaux du Muséum d’Histoire naturelle “Grigore Antipa,” which has limited distribution in the west, many workers studying tropical western Atlantic crustaceans still remain unaware of both the genus and species. Also, the species may have gone unrecognized (recorded as an odd specimen of Campylaspis, for instance) or may have been overlooked because of its small size. As part of an ongoing survey of the marine invertebrates of Guana Island, British Virgin Islands (BVI) (led by T.L. Zimmerman and J.W. Martin), numerous specimens of this nannastacid species were collected extending the known range eastward to the BVI. At the same time, the examination of other regional collections by two of us (RWH, TJH) established the presence of this species in Southeast Florida and the Gulf of Mexico (GOM), and we have found additional material from the southern Bahamian region and the northern Caribbean. In this note, we list the known occurrences of Cubanocuma, comment on the habitat, and mention certain morphological features observed from scanning electron microscopy (SEM)
Charge and fluence lifetime measurements of a dc high voltage GaAs photogun at high average current
GaAs-based dc high voltage photoguns used at accelerators with extensive user programs must exhibit long photocathode operating lifetime. Achieving this goal represents a significant challenge for proposed high average current facilities that must operate at tens of milliamperes or more. This paper describes techniques to maintain good vacuum while delivering beam, and techniques that minimize the ill effects of ion bombardment, the dominant mechanism that reduces photocathode yield of a GaAs-based dc high voltage photogun. Experimental results presented here demonstrate enhanced lifetime at high beam currents by: (a) operating with the drive laser beam positioned away from the electrostatic center of the photocathode, (b) limiting the photocathode active area to eliminate photoemission from regions of the photocathode that do not support efficient beam delivery, (c) using a large drive laser beam to distribute ion damage over a larger area, and (d) by applying a relatively low bias voltage to the anode to repel ions created within the downstream beam line. A combination of these techniques provided the best total charge extracted lifetimes in excess of 1000 C at dc beam currents up to 9.5 mA, using green light illumination of bulk GaAs inside a 100 kV photogun
Photoinjector improvements at CEBAF in support of parity violation experiments
Three photoinjector modifications were undertaken at CEBAF to help ensure successful completion of the PREx and Qweak parity violation experiments: the development of a pockels cell high voltage switch that provides stable voltages at 960 Hz helicity flip rate with 60 μs rise/fall time, the installation of a two-Wien-filter spin flipper for slow spin reversal, and the installation of a new photogun with inverted insulator geometry that operates at higher bias voltage
Two Novel Approaches for Electron Beam Polarization from Unstrained GaAs
Two novel approaches to producing highly-polarized electron beams from unstrained GaAs were tested using a micro-Mott polarimeter. Based on a suggestion by Nakanishi [1]], twophoton photoemission with 1560 nm light was used with photocathodes of varying thickness: 625m, 0.32m, and 0.18m. For each of these photocathodes, the degree of spin polarization of the photoemitted beam was less than 50%. Polarization via two-photon absorption was highest from the thinnest photocathode sample and close to that obtained from one-photon absorption (using 778 nm light), with values 40.3±1.0% and 42.6±1.0%, respectively. The second attempt to produce highly-polarized electrons used one-photon emission with 778 nm light in Laguerre-Gaussian modes with different amounts of orbital angular momentum. The degree of electron spin polarization was consistent with zero, with an upper limit of ~3% for light with up to ±5ħ of orbital angular momentum. In contrast, the degree of spin polarization was 32.3±1.4% using circularly-polarized laser light at the same wavelength, which is typical for thick, unstrained GaAs photocathodes
New Simulations for Ion-Production and Back-Bombardment in GaAs Photo-guns
GaAs-based DC high voltage photo-guns used at accelerators with extensive user programs must exhibit long photocathode operating lifetime. Achieving this goal represents a significant challenge for proposed high average current facilities that must operate at tens of milliamperes or more. Specifically, the operating lifetime is dominated by ion back-bombardment of the photocathode from ionized residual gas. While numerous experiments have been performed to characterize the operating lifetime under various conditions, detailed simulations of the ion back-bombardment mechanism that explains these experiments are lacking. Recently, a new user routine was implemented using the code General Particle Tracer (GPT) to simulate electron impact ionization of residual beam line gas and simultaneously track the incident electron, the ejected electron, and the newly formed ion. This new routine was benchmarked against analytical calculations and then applied to experiments performed at the CEBAF injector at the Thomas Jefferson National Accelerator Facility to study the effectiveness of limiting ions from entering the cathode-anode gap using a positively biased anode. These simulations were performed using detailed 3D field maps produced with CST Microwave Studio describing the photo-gun electrostatics. Discussion of the experiment and the application of this new GPT routine to model the experiments will be presented at the workshop
Evaluation of Niobium as Candidate Electrode Material for DC High Voltage Photoelectron Guns
The field emission characteristics of niobium electrodes were compared to those of stainless steel electrodes using a DC high voltage field emission test apparatus. A total of eight electrodes were evaluated: two 304 stainless steel electrodes polished to mirror-like finish with diamond grit and six niobium electrodes (two single-crystal, two large-grain, and two fine-grain) that were chemically polished using a buffered-chemical acid solution. Upon the first application of high voltage, the best large-grain and single-crystal niobium electrodes performed better than the best stainless steel electrodes, exhibiting less field emission at comparable voltage and field strength. In all cases, field emission from electrodes (stainless steel and/or niobium) could be significantly reduced and sometimes completely eliminated, by introducing krypton gas into the vacuum chamber while the electrode was biased at high voltage. Of all the electrodes tested, a large-grain niobium electrode performed the best, exhibiting no measurable field emission (< 10 pA) at 225 kV with 20 mm cathode/anode gap, corresponding to a field strength of 18:7 MV/m
Thermal Emittance and Lifetime of Alkali-Antimonide Photocathodes Grown On GaAs and Molybdenum Substrates Evaluated in a -300 kV dc Photogun
CsxKySb photocathodes grown on GaAs and molybdenum substrates were evaluated using a –300 kV dc high voltage photogun and diagnostic beam line. Photocathodes grown on GaAs substrates, with varying antimony layer thickness (estimated range from \u3c 20 nm to \u3e 1 um), yielded similar thermal emittance per rms laser spot size values (~0.4 mm mrad / mm) but very different operating lifetime. Similar thermal emittance was obtained for a photocathode grown on a molybdenum substrate but with markedly improved lifetime. For this photocathode, no decay in quantum efficiency was measured at 4.5 mA average current and with peak current 0.55 A at the photocathode
Magnetized Electron Source for JLEIC Cooler
Magnetized bunched-beam electron cooling is a critical part of the Jefferson Lab Electron Ion Collider (JLEIC). Strong cooling of ion beams will be accomplished inside a cooling solenoid where the ions co-propagate with an electron beam generated from a source immersed in magnetic field. This contribution describes the production and characterization of magnetized electron beam using a compact 300 kV DC high voltage photogun and bialkali-antimonide photocathodes. Beam magnetization was studied using a diagnostic beamline that includes viewer screens for measuring the shearing angle of the electron beamlet passing through a narrow upstream slit. Correlated beam emittance with magnetic field at the photocathode was measured for various laser spot sizes. Measurements of photocathode lifetime were carried out at different magnetized electron beam currents up to 28 mA and high bunch charge up to 0.7 nano-Coulomb was demonstrated
- …