Versatile mobile lidar system for environmental monitoring

A mobile lidar (light detection and ranging) system for environmental monitoring is described. The optical and electronic systems are housed in a truck with a retractable rooftop transmission and receiving mirror, connected to a 40-cm-diameter vertically looking telescope. Two injection-seeded Nd:YAG lasers are employed in connection with an optical parametric oscillator-optical parametric amplification transmitter, allowing deep-UV to mid-IR wavelengths to be generated. Fast switching that employs piezoelectric drivers allows multiwavelength differential absorption lidar for simultaneous measurements of several spectrally overlapping atmospheric species. The system can also be used in an imaging multispectral laser-induced fluorescence mode on solid targets. Advanced LabVIEW computer control and multivariate data processing render the system versatile for a multitude of measuring tasks. We illustrate the monitoring of industrial atmospheric mercury and hydrocarbon emissions, volcanic sulfur dioxide plume mapping, fluorescence lidar probing of seawater, and multispectral fluorescence imaging of the facades of a historical monument. (C) 2003 Optical Society of America

Real-time gas-correlation imaging employing thermal background radiation

Real-time imaging of gas leaks was demonstrated using an IR camera employing outdoor thermal background radiation. Ammonia, ethylene and methane detection was demonstrated in the spectral region 7-13 mu m. Imaging was accomplished using an optical filter and a gas-correlation cell matching the absorption band of the gas. When two gases, such as ammonia and ethylene, are absorbing in the same wavelength region it is possible to isolate one for display by using gas-correlation multispectral imaging. Results from a field test on a leaking gas tanker are presented as QuickTime movies. A detection limit of 200 ppm x meter for ammonia was accomplished in this setup when the temperature difference between the background and the gas was 18 K and the frame rate was 15 Hz. (C) 2000 Optical Society of America

Differential Optical Absorption Spectroscopy (DOAS) Measurements of Ozone in the 280--290 nm Wavelength Region

The differential absorption structure of the ozone spectrum between 250 and 330 nm has been investigated in order to determine the optimal wavelength region to be utilized for active differential optical absorption spectroscopy (DOAS) measurements. Considering aspects of atmospheric attenuation and interference from other species as well as the magnitude of the differential absorption cross section, an interval around 283 nm was found to be a good candidate for this application. This result was also verified during 12 months of continuous ozone monitoring in an urban environment

Long-path monitoring of NO2 with a 635 nm diode laser using frequency-modulation spectroscopy

In situ monitoring of traffic-generated nitrogen dioxide (NO2) emissions using long-path absorption spectroscopy is reported. High-sensitivity detection of NO2 is achieved by employing two-tone frequencymodulation spectroscopy at a visible absorption band using a tunable high-power diode laser operated around 635 nm. A real-time absorption spectrometer is accomplished by repetitively applying a rectangular current pulse to the diode-laser operating current, allowing detection of isolated NO2 absorption lines. A detection limit of 10 mu g/m(3) for NO2 at atmospheric pressure using a 160 m absorption path is demonstrated. Continuous monitoring of NO2 over a road intersection at peak traffic is performed

Measurement of Aromatic-hydrocarbons With the DOAS Technique

Long-path DOAS (differential optical absorption spectroscopy) in the ultraviolet spectral region has been shown to be applicable for low-concentration measurements of light aromatic hydrocarbons. However, because of spectral interferences among different aromatics as well as with oxygen, ozone, and sulfur dioxide, the application of the DOAS technique for this group of components is not without problems. This project includes a study of the differential absorption characteristics, between 250 and 280 nm, of twelve light aromatic hydrocarbons representing major constituents in technical solvents used in the automobile industry. Spectral overlapping between the different species, including oxygen, ozone, and sulfur dioxide, has been investigated and related to the chemical structure of the different aromatics. Interference effects in the DOAS application due to spectral overlapping have been investigated both in quantitative and in qualitative terms, with data from a field campaign at a major automobile manufacturing plant

Fluorescence lidar imaging of historical monuments

What is believed to be the first fluorescence imaging of the facades of a historical building, which was accomplished with a scanning fluorescence lidar system, is reported. The mobile system was placed at a distance of similar to 60 m from the medieval Lund Cathedral (Sweden), and a 355-nm pulsed laser beam was swept over the stone facades row by row while spectrally resolved fluorescence signals of each measurement point were recorded. By multispectral image processing, either by formation of simple spectral-band ratios or by use of multivariate techniques, areas with different spectral signatures were classified. In particular, biological growth was observed and different stone types were distinguished. The technique can yield data for use in facade status assessment and restoration planning. (C) 2001 Optical Society of America