12 research outputs found
Research and Development of Super Permeability NiFe/Cu Composite Wires for Micro Magnetic Sensors
Ph.DDOCTOR OF PHILOSOPH
Cascading of the as-built microstructure through heat treatment and its role on the tensile properties of laser powder bed fused Inconel 718
The microstructures and mechanical properties of the Ni based superalloy, Inconel 718 (IN718), which was additively manufactured using the laser beam powder bed fusion (LB-PBF) technique in the as-built (AB) and heat treated (HT) conditions were investigated, with emphasis on the microstructural evolution from the AB to HT conditions and, in turn, on the tensile properties. Optimized LB-PBF parameters in two different processing instruments led to distinct textures in the AB alloys, which, in turn, impart diverging combinations of strength-ductility properties. These variations are rationalized by recourse to an analysis of the effective mean free path for dislocations within the solidification cell structures. Amongst the five different heat treatment schedules examined, one set led to the retention of as-built grain morphology and texture with the formation of the δ phase that is oriented at either ±45° to build direction in the alloy with 〈100〉 texture or at 0/ ± 90 ° in the alloy with 〈110〉 texture. The second set of heat treatments led to complete recrystallization, and hence loss of as-built microstructural signatures, with no δ phase. The critical role of δ phase in determining the grain growth kinetics and subsequently the anisotropy in mechanical properties of heat treated IN718 was elucidated. The absence of δ phase was found to enhance both strength and ductility, while its occurrence in the alloy with 〈110〉 texture along the build direction reduces ductility markedly. Implications of these results in terms of developing and designing the processing strategies of LB-PBF Inconel 718 with tailored microstructures and good mechanical properties are discussed.Agency for Science, Technology and Research (A*STAR)This research is supported by Agency for Science, Technology and Research (A∗STAR) of Singapore via the Structural Metals Alloys Program (No. A18B1b0061)
Towards binder jetting and sintering of AZ91 magnesium powder
The inherent properties of magnesium (Mg) make it one of the most challenging metals to process with additive manufacturing (AM), especially with fusion-based techniques. Binder jetting is a two-step AM method in which green Mg objects print near room temperature, then the as-printed green object sinters at a high temperature. Thus far, a limited number of studies have been reported on the binder jetting of Mg powder. This study aimed to push the knowledge base of binder jetting and sintering for AZ91D powder. To this end, the principle of capillary-mediated binderless printing was used to determine the ink saturation level (SL) required for the binder jetting of a green AZ91 object. The effects of various SLs on forming interparticle bridges between AZ91 powder particles and the dimensional accuracy of the resultant as-printed objects were investigated. Green AZ91 objects sintered at different temperatures ranging from 530 °C to 575 °C showed a marginal increment in density with an increase in sintering temperature (i.e., 1.5% to 5.1%). The root cause of such a low sintering densification rate in the presence of up to 54.5 vol. % liquid phase was discussed in the context of the powder packing density of as-printed objects and swelling occurring at sintering temperatures ≥ 45 °C. Overall, this work demonstrates the great potential of binderless printing for AM of Mg powder and the need for pushing sintering boundaries for further densification of as-printed Mg components.Published versionThis research was funded by the first Singapore–Germany academic–industry (2 + 2) international collaboration grant (Grant no. A1890b0050)
Surface Modification with Phosphate and Hydroxyapatite of Porous Magnesium Scaffolds Fabricated by Binder Jet Additive Manufacturing
The presence of porosity within magnesium-based orthopaedic implants is known to be beneficial, promoting cell proliferation and vascularisation. However, the presence of porosity increases the surface area available for corrosion, compounding the issue of high corrosion rates which has long been plaguing magnesium-based materials. This work looks at the influence of hydroxyapatite and phosphate conversion coatings on the corrosion performance of conventionally cast, dense Mg-Zn-Zr alloys and binder jet additive manufactured porous Mg-Zn-Zr scaffolds. The performance of coating on dense Mg-Zn-Zr was found to be more effective than the coating on the porous Mg-Zn-Zr scaffold, with the discrepancies attributed to both the microstructure and geometric influence of the binder jet additive manufactured, porous Mg-Zn-Zr scaffold, which not only increases the rate of hydrogen evolution but also reduces the ability of the hydrogen gas generated within the pore channels to escape to the sample’s surface. This restricts the effectiveness of coating application for porous Mg scaffold. Furthermore, the limited diffusion within the pore channels can also result in differing localized corrosion environments, causing discrepancies between the localised corrosion environment within the pore channels and that at the bulk electrolyte
Surface Modification with Phosphate and Hydroxyapatite of Porous Magnesium Scaffolds Fabricated by Binder Jet Additive Manufacturing
The presence of porosity within magnesium-based orthopaedic implants is known to be beneficial, promoting cell proliferation and vascularisation. However, the presence of porosity increases the surface area available for corrosion, compounding the issue of high corrosion rates which has long been plaguing magnesium-based materials. This work looks at the influence of hydroxyapatite and phosphate conversion coatings on the corrosion performance of conventionally cast, dense Mg-Zn-Zr alloys and binder jet additive manufactured porous Mg-Zn-Zr scaffolds. The performance of coating on dense Mg-Zn-Zr was found to be more effective than the coating on the porous Mg-Zn-Zr scaffold, with the discrepancies attributed to both the microstructure and geometric influence of the binder jet additive manufactured, porous Mg-Zn-Zr scaffold, which not only increases the rate of hydrogen evolution but also reduces the ability of the hydrogen gas generated within the pore channels to escape to the sample’s surface. This restricts the effectiveness of coating application for porous Mg scaffold. Furthermore, the limited diffusion within the pore channels can also result in differing localized corrosion environments, causing discrepancies between the localised corrosion environment within the pore channels and that at the bulk electrolyte
Additive manufacturing of alloys with programmable microstructure and properties
In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy’s solidification structure, we can ‘program’ recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM
Recommended from our members
Additive manufacturing of alloys with programmable microstructure and properties
Acknowledgements: The authors from Nanyang Technological University (NTU) and University of Cambridge would like to acknowledge M.J. Demkowicz, Z. Cordero, and M. Duchamp for valuable discussion, C. Todaro for the beamtime of neutron diffraction in ANSTO, Z. Wang and T.P. Le for technical support, and the Facilities for Analysis, Characterization, Testing and Simulations (FACTS) at NTU for access to electron microscopy equipment. This research was funded by the National Research Foundation (NRF) Singapore, under the NRF Fellowship program (NRF-NRFF2018-05). S.V.P. acknowledges support from the Swiss National Science Foundation (SNF Sinergia 193799). H.L.S. acknowledges support from the Science and Engineering Research Council, Agency for Science, Technology and Research (A*STAR), Singapore (142 68 00088). H.G. acknowledges support from Advanced Models for Additive Manufacturing (AM2) program under A*STAR (M22L2b0111) and support as a Distinguished University Professor of NTU and Scientific Director of Institute of High Performance Computing of the A*STAR, Singapore.In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy’s solidification structure, we can ‘program’ recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM
Recommended from our members
Additive manufacturing of alloys with programmable microstructure and properties
Acknowledgements: The authors from Nanyang Technological University (NTU) and University of Cambridge would like to acknowledge M.J. Demkowicz, Z. Cordero, and M. Duchamp for valuable discussion, C. Todaro for the beamtime of neutron diffraction in ANSTO, Z. Wang and T.P. Le for technical support, and the Facilities for Analysis, Characterization, Testing and Simulations (FACTS) at NTU for access to electron microscopy equipment. This research was funded by the National Research Foundation (NRF) Singapore, under the NRF Fellowship program (NRF-NRFF2018-05). S.V.P. acknowledges support from the Swiss National Science Foundation (SNF Sinergia 193799). H.L.S. acknowledges support from the Science and Engineering Research Council, Agency for Science, Technology and Research (A*STAR), Singapore (142 68 00088). H.G. acknowledges support from Advanced Models for Additive Manufacturing (AM2) program under A*STAR (M22L2b0111) and support as a Distinguished University Professor of NTU and Scientific Director of Institute of High Performance Computing of the A*STAR, Singapore.AbstractIn metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy’s solidification structure, we can ‘program’ recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM.</jats:p