Powder pre-treatment for aerosol deposition of tin dioxide coatings for gas sensors

The Aerosol Deposition (AD) method has the unique property to allow for manufacturing dense ceramic films at room temperature. As found in many publications, the deposition process is very sensitive to powder properties. In particular, powders of nano-sized particles and grains, e.g., from precipitation, are usually beyond the conventional size range of AD processability, yielding chalk-like films of low mechanical stability. Thus, the conventional AD process is limited in applicability. In this study, we try to overcome this problem by adapting the standard milling treatment of powders for improved deposition by additional temperature pre-treatment. Using commercial tin dioxide and including a temperature treatment for grain growth, makes the powder accessible to deposition. In this way, we achieve optically translucent and conductive SnO2 thick films. With the application such as a gas sensitive film as one of many possible applications for SnO2 thick-films, the sensors show excellent response to various reducing gases. This study shows one exemplary way of extending the range of adequate powder and applications for the AD method

Compact Layers of Hybrid Halide Perovskites Fabricated via the Aerosol Deposition Process : Uncoupling Material Synthesis and Layer Formation

We present the successful fabrication of CH3NH3PbI3 perovskite layers by the aerosol deposition method (ADM). The layers show high structural purity and compactness, thus making them suitable for application in perovskite-based optoelectronic devices. By using the aerosol deposition method we are able to decouple material synthesis from layer processing. Our results therefore allow for enhanced and easy control over the fabrication of perovskite-based devices, further paving the way for their commercialization

The Aerosol Deposition Method: A Modified Aerosol Generation Unit to Improve Coating Quality

Owing to its ability to produce dense thick-films at room temperature directly from a ceramic powder, the Aerosol Deposition Method (AD) possesses a unique feature in ceramics processing. For this technology, the aerosol generation of particles is a decisive part of reliable process control. However, there has only been a small amount of work published addressing this topic. In this work, we compare the aerosolization and deposition behavior of a fluidized bed generator with an aerosol generator with the rotary brush principle. While film properties very much depend on deposition time for the fluidized bed generator, films produced with the brush generator show a constant film profile, and their film thickness correlates with the controllable aerosol concentration and the duration of deposition. This type of aerosol generation may improve the setup towards a more reliable AD process

The Aerosol Deposition Method: A Modified Aerosol Generation Unit to Improve Coating Quality

Owing to its ability to produce dense thick-films at room temperature directly from a ceramic powder, the Aerosol Deposition Method (AD) possesses a unique feature in ceramics processing. For this technology, the aerosol generation of particles is a decisive part of reliable process control. However, there has only been a small amount of work published addressing this topic. In this work, we compare the aerosolization and deposition behavior of a fluidized bed generator with an aerosol generator with the rotary brush principle. While film properties very much depend on deposition time for the fluidized bed generator, films produced with the brush generator show a constant film profile, and their film thickness correlates with the controllable aerosol concentration and the duration of deposition. This type of aerosol generation may improve the setup towards a more reliable AD process

Gazette de Bayonne, de Biarritz et du Pays basque

28 janvier 19431943/01/28 (A51,N10572).Appartient à l’ensemble documentaire : Aquit