87,633 research outputs found
Heat transfer and pressure drop in blade cooling channels with turbulence promoters
Repeated rib roughness elements have been used in advanced turbine cooling designs to enhance the internal heat transfer. Often the ribs are perpendicular to the main flow direction so that they have an angle-of-attack of 90 deg. The objective of the project was to investigate the effect of rib angle-of-attack on the pressure drop and the average heat transfer coefficients in a square duct with two opposite rib-roughned walls for Reynolds number varied from 8000 to 80,000. The rib height-to-equivalent diameter ratio (e/D) was kept at a constant value of 0.063, the rib pitch-to-height ratio (P/e) was varied from 10 to 20, and the rib angle-of-attack (alpha) was varied from 90 deg to 60 deg to 45 deg to 30 deg respectively. Two types of entrance conditions were examined, namely, long duct and sudden contraction. The heat transfer coefficient distribution on the smooth side wall and the rough side wall at the entrance and the fully developed regions were measured. Thermal performance comparison indicated that the pumping power requirement for the rib with an oblique angle to the flow (alpha = 45 deg to 30 deg) was about 20 to 50 percent lower than the rib with a 90 deg angle to the flow for a given heat transfer duty
Chemical control of orbital polarization in artificially structured transition-metal oxides: La2NiXO6 (X=B, Al, Ga, In) from first principles
The application of modern layer-by-layer growth techniques to
transition-metal oxide materials raises the possibility of creating new classes
of materials with rationally designed correlated electron properties. An
important step toward this goal is the demonstration that electronic structure
can be controlled by atomic composition. In compounds with partially occupied
transition-metal d shells, one important aspect of the electronic structure is
the relative occupancy of different d orbitals. Previous work has established
that strain and quantum confinement can be used to influence orbital occupancy.
In this paper we demonstrate a different modality for orbital control in
transition-metal oxide heterostructures, using density-functional band
calculations supplemented by a tight-binding analysis to show that the choice
of nontransition-metal counterion X in transition-metal oxide heterostructures
composed of alternating LaNiO3 and LaXO3 units strongly affects orbital
occupancy, changing the magnitude and in some cases the sign of the orbital
polarization
Polarized Curvature Radiation in Pulsar Magnetosphere
The propagation of polarized emission in pulsar magnetosphere is investigated
in this paper. The polarized waves are generated through curvature radiation
from the relativistic particles streaming along curved magnetic field lines and
co-rotating with the pulsar magnetosphere. Within the 1/{\deg} emission cone,
the waves can be divided into two natural wave mode components, the ordinary
(O) mode and the extraord nary (X) mode, with comparable intensities. Both
components propagate separately in magnetosphere, and are aligned within the
cone by adiabatic walking. The refraction of O-mode makes the two components
separated and incoherent. The detectable emission at a given height and a given
rotation phase consists of incoherent X-mode and O-mode components coming from
discrete emission regions. For four particle-density models in the form of
uniformity, cone, core and patches, we calculate the intensities for each mode
numerically within the entire pulsar beam. If the co-rotation of relativistic
particles with magnetosphere is not considered, the intensity distributions for
the X-mode and O-mode components are quite similar within the pulsar beam,
which causes serious depolarization. However, if the co-rotation of
relativistic particles is considered, the intensity distributions of the two
modes are very different, and the net polarization of out-coming emission
should be significant. Our numerical results are compared with observations,
and can naturally explain the orthogonal polarization modes of some pulsars.
Strong linear polarizations of some parts of pulsar profile can be reproduced
by curvature radiation and subsequent propagation effect.Comment: 12 pages, 9 figures, Accepted for publication in MNRA
Local heat/mass transfer and pressure drop in a two-pass rib-roughened channel for turbine airfoil cooling
The heat transfer characteristics of turbulent air flow in a multipass channel were studied via the naphthalene sublimation technique. The naphthalene-coated test section, consisting of two straight, square channels joined by a 180 deg turn, resembled the internal cooling passages of gas turbine airfoils. The top and bottom surfaces of the test channel were roughened by rib turbulators. The rib height-to-hydraulic diameter ratio (e/D) were 0.063 and 0.094, and the rib pitch-to-height ratio (P/e) were 10 and 20. The local heat/mass transfer coefficients on the roughened top wall and on the smooth divider and side walls of the test channel were determined for three Reynolds numbers of 15, 30, and 60, thousand, and for three angles of attack (alpha) of 90, 60, and 45 deg. Results showed that the local Sherwood numbers on the ribbed walls were 1.5 to 6.5 times those for a fully developed flow in a smooth square duct. The average ribbed-wall Sherwood numbers were 2.5 to 3.5 times higher than the fully developed values, depending on the rib angle of attack and the Reynolds number. The results also indicated that, before the turn, the heat/mass transfer coefficients in the cases of alpha = 60 and 45 deg were higher than those in the case of alpha=90 deg. However, after the turn, the heat/mass transfer coefficients in the oblique-rib cases were lower than those in the transverse rib case. Correlations for the average Sherwood number ratios for individual channel surfaces and for the overall Sherwood number ratios are reported. Correlations for the fully developed friction factors and for the loss coefficients are also provided
Dynamical Mean Field Theory of Nickelate Superlattices
Dynamical mean field methods are used to calculate the phase diagram,
many-body density of states, relative orbital occupancy and Fermi surface shape
for a realistic model of -based superlattices. The model is derived
from density functional band calculations and includes oxygen orbitals. The
combination of the on-site Hunds interaction and charge-transfer between the
transition metal and the oxygen orbitals is found to reduce the orbital
polarization far below the levels predicted either by band structure
calculations or by many-body analyses of Hubbard-type models which do not
explicitly include the oxygen orbitals. The findings indicate that
heterostructuring is unlikely to produce one band model physics and demonstrate
the fundamental inadequacy of modeling the physics of late transition metal
oxides with Hubbard-like models.Comment: Values of orbitals polarizations reported in Fig. 2 corrected. We
thank E. Benckiser and M. Wu for pointing out the error
Asymptotics of Spinfoam Amplitude on Simplicial Manifold: Lorentzian Theory
The present paper studies the large-j asymptotics of the Lorentzian EPRL
spinfoam amplitude on a 4d simplicial complex with an arbitrary number of
simplices. The asymptotics of the spinfoam amplitude is determined by the
critical configurations. Here we show that, given a critical configuration in
general, there exists a partition of the simplicial complex into three type of
regions R_{Nondeg}, R_{Deg-A}, R_{Deg-B}, where the three regions are
simplicial sub-complexes with boundaries. The critical configuration implies
different types of geometries in different types of regions, i.e. (1) the
critical configuration restricted into R_{Nondeg} is degenerate of type-A in our definition of degeneracy, but implies
a nondegenerate discrete Euclidean geometry on R_{Deg-A}, (3) the critical
configuration restricted into R_{Deg-B} is degenerate of type-B, and implies a
vector geometry on R_{Deg-B}. With the critical configuration, we further make
a subdivision of the regions R_{Nondeg} and R_{Deg-A} into sub-complexes (with
boundary) according to their Lorentzian/Euclidean oriented 4-simplex volume
V_4(v), such that sgn(V_4(v)) is a constant sign on each sub-complex. Then in
the each sub-complex, the spinfoam amplitude at the critical configuration
gives the Regge action in Lorentzian or Euclidean signature respectively on
R_{Nondeg} or R_{Deg-A}. The Regge action reproduced here contains a sign
factor sgn(V_4(v)) of the oriented 4-simplex volume. Therefore the Regge action
reproduced here can be viewed a discretized Palatini action with on-shell
connection. Finally the asymptotic formula of the spinfoam amplitude is given
by a sum of the amplitudes evaluated at all possible critical configurations,
which are the products of the amplitudes associated to different type of
geometries.Comment: 54 pages, 2 figures, reference adde
Entropic Regularization Approach for Mathematical Programs with Equilibrium Constraints
A new smoothing approach based on entropic perturbationis proposed for solving mathematical programs withequilibrium constraints. Some of the desirableproperties of the smoothing function are shown. Theviability of the proposed approach is supported by acomputationalstudy on a set of well-known test problems.mathematical programs with equilibrium constraints;entropic regularization;smoothing approach
Entropic regularization approach for mathematical programs with equilibrium constraints
A new smoothing approach based on entropic perturbation is proposed for solving mathematical programs with equilibrium constraints. Some of the desirable properties of the smoothing function are shown. The viability of the proposed approach is supported by a computational study on a set of well-known test problems.Entropic regularization;Smoothing approach;Mathematical programs with equilibrium constraints
- …