Development of a novel multi-capillary, multi-temperature commercial refrigerator cabinet with common low-pressure receiver

A multi-temperature 4 drawer catering cabinet was designed to operate using a low-pressure receiver with capillary expansion to the separate evaporator in each drawer. Low-pressure receivers have been shown to be an effective way of allowing evaporators to operate in a fully flooded mode thus enabling more efficient use of the evaporator surface for heat transfer. If a low-pressure receiver is used in a refrigeration circuit the control of refrigerant flow into the evaporator is less critical as the expansion device is not responsible for preventing liquid returning to the compressor. Therefore, a capillary expansion device can be used effectively over a range of operating pressures. The system was shown to be effective at maintaining temperatures in the storage drawers during chilled, frozen and mixed storage temperature tests carried out to the EN441 test standard. The cabinet operated successfully at all conditions except when the heat load in each drawer was excessive (>400 W above base level heat load). In this case, refrigerant was found to back up in the condenser and the low-pressure receiver was empty of liquid refrigerant. A solution to this would be to allow controlled flow of refrigerant from the condenser to the low-pressure receiver at high condensing pressures

Application of Vacuum Insulation Panels in the cold chain - Analysis of viability

© 2014 Elsevier Ltd and IIR.Vacuum Insulation Panels (VIPs) have already found application in some specialist applications where minimal energy consumption is important and space is at a premium. This paper investigates the feasibility of widespread application of VIPs in the cold chain by embedding them into the polyurethane (PU) foamed walls of traditional refrigerator and freezer cabinets. Thermal modelling of the insulation of a range of typical refrigerator and freezer cabinets as used throughout the cold chain was carried out both with and without VIPs embedded in the insulating walls. The potential energy savings and payback times were then calculated; for refrigerators the average payback was 9.7 years, for freezers it was 4.5 years

Cryptococcal Meningitis

Cryptococcal meningitis occurred in an elderly Coloured woman in the Northern Cape. She presented with symptoms and signs suggestive of encephalitis 4 weeks after a cholecystectomy. After the administration of cortisone, cryptococcal organisms were isolated in her cerebrospinal fluid. She was first treated with intravenous amphotericin-B without improvement, and then with 5-f1uorocytosine orally, to which she responded without appreciable sideeffects. An abdominal gland biopsy suggested sarcoidosis, but sarcoid reaction may occur in the presence of cryptococcosis, although the organisms could not be demonstrated, as is often the case.S. Afr. Med. J., 48, 555 (1974)

Prune Belly Syndrome

Two cases of prune belly syndrome in Black infants are presented. The prune belly syndrome, or congenital absence of abdominal muscles, is accompanied by hydro-ureter, hydronephrosis, megalocystis and usually undescended testes. Other associated congenital defects occur, of which orthopaedic defects appear to be the most prevalent. Others are patent urachus, congenital heart malformation, anomalies of the eyes and ears, ectodermal dysplasia, torticollis and micrognathia.S. Afr. Med. J., 48, 839 (1974)

Combined soft and skeletal tissue modelling of normal and dysmorphic midface postnatal development

BACKGROUND: Midface hypoplasia as exemplified by Treacher Collins Syndrome (TCS) can impair appearance and function. Reconstruction involves multiple invasive surgeries with variable long-term outcomes. This study aims to describe normal and dysmorphic midface postnatal development through combined modelling of skeletal and soft tissues and to develop a surgical evaluation tool. MATERIALS AND METHODS: Midface skeletal and soft tissue surfaces were extracted from computed tomography scans of 52 control and 14 TCS children, then analysed using dense surface modelling. The model was used to describe midface growth, morphology, and asymmetry, then evaluate postoperative outcomes. RESULTS: Parameters responsible for the greatest variation in midface size and shape showed differences between TCS and controls with close alignment between skeletal and soft tissue models. TCS children exhibited midface dysmorphology and hypoplasia when compared with controls. Asymmetry was also significantly higher in TCS midfaces. Combined modelling was used to evaluate the impact of surgery in one TCS individual who showed normalisation immediately after surgery but reversion towards TCS dysmorphology after 1 year. CONCLUSION: This is the first quantitative analysis of postnatal midface development using combined modelling of skeletal and soft tissues. We also provide an approach for evaluation of surgical outcomes, laying the foundations for future development of a preoperative planning tool

Foot health education for people with rheumatoid arthritis : the practitioner's perspective

Background: Patient education is considered to be a key role for podiatrists in the management of patients with rheumatoid arthritis (RA). Patient education has undoubtedly led to improved clinical outcomes, however no attempts have been made to optimise its content or delivery to maximise benefits within the context of the foot affected by rheumatoid arthritis. The aim of this study was to identify the nature and content of podiatrists' foot health education for people with RA. Any potential barriers to its provision were also explored. Methods: A focus group was conducted. The audio dialogue was recorded digitally, transcribed verbatim and analysed using a structured, thematic approach. The full transcription was verified by the focus group as an accurate account of what was said. The thematic analysis framework was verified by members of the research team to ensure validity of the data. Results: Twelve members (all female) of the north west Podiatry Clinical Effectiveness Group for Rheumatology participated. Six overarching themes emerged: (i) the essence of patient education; (ii) the content; (iii) patient-centred approach to content and timing; (iv) barriers to provision; (v) the therapeutic relationship; and (vi) tools of the trade. Conclusion: The study identified aspects of patient education that this group of podiatrists consider most important in relation to its: content, timing, delivery and barriers to its provision. General disease and foot health information in relation to RA together with a potential prognosis for foot health, the role of the podiatrist in management of foot health, and appropriate self-management strategies were considered to be key aspects of content, delivered according to the needs of the individual. Barriers to foot health education provision, including financial constraints and difficulties in establishing effective therapeutic relationships, were viewed as factors that strongly influenced foot health education provision. These data will contribute to the development of a patient-centred, negotiated approach to the provision of foot health education for people with RA

Comparing Tolerance of Ambiguity in Veterinary and Medical Students

Current guidelines suggest that educators in both medical and veterinary professions should do more to ensure that students can tolerate ambiguity. Designing curricula to achieve this requires the ability to measure and understand differences in ambiguity tolerance among and within professional groups. Although scales have been developed to measure tolerance of ambiguity in both medical and veterinary professions, no comparative studies have been reported. We compared the tolerance of ambiguity of medical and veterinary students, hypothesizing that veterinary students would have higher tolerance of ambiguity, given the greater patient diversity and less well-established evidence base underpinning practice. We conducted a secondary analysis of questionnaire data from first- to fourth-year medical and veterinary students. Tolerance of ambiguity scores were calculated and compared using the TAMSAD scale (29 items validated for the medical student population), the TAVS scale (27 items validated for the veterinary student population), and a scale comprising the 22 items common to both scales. Using the TAMSAD and TAVS scales, medical students had a significantly higher mean tolerance of ambiguity score than veterinary students (56.1 vs. 54.1, p<.001 and 60.4 vs. 58.5, p=.002, respectively) but no difference was seen when only the 22 shared items were compared (56.1 vs. 57.2, p=.513). The results do not support our hypothesis and highlight that different findings can result when different tools are used. Medical students may have slightly higher tolerance of ambiguity than veterinary students, although this depends on the scale used

The Turkey Ig-like receptor family: identification, expression and function.

The chicken leukocyte receptor complex located on microchromosome 31 encodes the chicken Ig-like receptors (CHIR), a vastly expanded gene family which can be further divided into three subgroups: activating CHIR-A, bifunctional CHIR-AB and inhibitory CHIR-B. Here, we investigated the presence of CHIR homologues in other bird species. The available genome databases of turkey, duck and zebra finch were screened with different strategies including BLAST searches employing various CHIR sequences, and keyword searches. We could not identify CHIR homologues in the distantly related zebra finch and duck, however, several partial and complete sequences of CHIR homologues were identified on chromosome 3 of the turkey genome. They were designated as turkey Ig-like receptors (TILR). Using cDNA derived from turkey blood and spleen RNA, six full length TILR could be amplified and further divided according to the typical sequence features into one activating TILR-A, one inhibitory TILR-B and four bifunctional TILR-AB. Since the TILR-AB sequences all displayed the critical residues shown to be involved in binding to IgY, we next confirmed the IgY binding using a soluble TILR-AB1-huIg fusion protein. This fusion protein reacted with IgY derived from various gallinaceous birds, but not with IgY from other bird species. Finally, we tested various mab directed against CHIR for their crossreactivity with either turkey or duck leukocytes. Whereas no staining was detectable with duck cells, the CHIR-AB1 specific mab 8D12 and the CHIR-A2 specific mab 13E2 both reacted with a leukocyte subpopulation that was further identified as thrombocytes by double immunofluorescence employing B-cell, T-cell and thrombocyte specific reagents. In summary, although the turkey harbors similar LRC genes as the chicken, their distribution seems to be distinct with predominance on thrombocytes rather than lymphocytes

3D Characterisation of Dry Powder Inhaler Formulations: Developing X-ray Micro Computed Tomography Approaches.

Carrier-based dry powder inhaler (DPI) formulations need to be accurately characterised for their particle size distributions, surface roughnesses, fines contents and flow properties. Understanding the micro-structure of the powder formulation is crucial, yet current characterisation methods give incomplete information. Commonly used techniques like laser diffraction (LD) and optical microscopy (OM) are limited due to the assumption of sphericity and can give variable results depending on particle orientation and dispersion. The aim of this work was to develop new powder analytical techniques using X-ray computed tomography (XCT) that could be employed for non-destructive metrology of inhaled formulations. α-lactose monohydrate powders with different characteristics have been analysed, and their size and shape (sphericity/aspect ratio) distributions compared with results from LD and OM. The three techniques were shown to produce comparable size distributions, while the different shape distributions from XCT and OM highlight the difference between 2D and 3D imaging. The effect of micro-structure on flowability was also analysed through 3D measurements of void volume and tap density. This study has demonstrated for the first time that XCT provides an invaluable, non-destructive and analytical approach to obtain number- and volume-based particle size distributions of DPI formulations in 3D space, and for unique 3D characterisation of powder micro-structure

A phase II study of weekly neoadjuvant chemotherapy followed by radical chemoradiation for locally advanced cervical cancer

Background: We investigated the feasibility of dose-dense neoadjuvant chemotherapy (NACT) with paclitaxel and carboplatin before radical chemoradiation (CRT) and assessed the response rate to such a regimen. Methods: CxII is a single-arm phase II trial of 46 patients, with locally advanced cervical cancer (stage Ib2-IVa). Patients received dose-dense carboplatin (AUC2) and paclitaxel (80 mg m−2) weekly for six cycles followed by CRT (40 mg m−2 of weekly cisplatin, 50.4 Gy, 28 fractions plus brachytherapy). The primary end point was response rate 12 weeks post-CRT. Results: Baseline characteristics were: median age at diagnosis 43 years; 72% squamous, 22% adenocarcinoma and 7% adenosquamous histologies; FIGO stage IB2 (11%), II (50%), III (33%), IV (7%). Complete or partial response rate was 70% (95% CI: 54–82) post-NACT and 85% (95% CI: 71–94) post-CRT. The median follow-up was 39.1 months. Overall and progression-free survivals at 3 years were 67% (95% CI: 51–79) and 68% (95% CI: 51–79), respectively. Grade 3/4 toxicities were 20% during NACT (11% haematological, 9% non-haematological) and 52% during CRT (haematological: 41%, non-haematological: 22%). Conclusion: A good response rate is achieved by dose-dense weekly NACT with carboplatin and paclitaxel followed by radical CRT. This treatment regimen is feasible as evidenced by the acceptable toxicity of NACT and by the high compliance to radiotherapy (98%)