Can previously sedentary females use the feeling scale to regulate exercise intensity in a gym environment? an observational study

Background Recent research suggests that the Feeling Scale (FS) can be used as a method of exercise intensity regulation to maintain a positive affective response during exercise. However, research to date has been carried out in laboratories and is not representative of natural exercise environments. The purpose of this study was to evaluate whether sedentary women can self-regulate their exercise intensity using the FS to experience positive affective responses in a gym environment using their own choice of exercise mode; cycling or treadmill. Methods Fourteen females (24.9 years ± 5.2; height 166.7 ± 5.7 cm; mass 66.3 ± 13.4 kg; BMI 24.1 ± 5.5)) completed a submaximal exercise test and each individual’s ventilatory threshold (V˙T) was identified. Following this, three 20 min gym-based exercise trials, either on a bike or treadmill were performed at an intensity that was self-selected and perceived to correspond to the FS value of +3 (good). Oxygen uptake, heart rate (HR) and ratings of perceived exertion (RPE) were measured during exercise at the participants chosen intensity. Results Results indicated that on average participants worked close to their V˙T and increased their exercise intensity during the 20-min session. Participants worked physiologically harder during cycling exercise. Consistency of oxygen uptake, HR and RPE across the exercise trials was high. Conclusion The data indicate that previously sedentary women can use the FS in an ecological setting to regulate their exercise intensity and that regulating intensity to feel ‘good’ should lead to individuals exercising at an intensity that would result in cardiovascular gains if maintained

A structured collaborative approach to intervention design using a modified intervention mapping approach: a case study using the Management and Interventions for Asthma (MIA) project for South Asian children

Background: To describe how using a combined approach of community-based participatory research and intervention mapping principles could inform the development of a tailored complex intervention to improve management of asthma for South Asian (SA) children; Management and Interventions for Asthma (MIA) study. / Methods: A qualitative study using interviews, focus groups, workshops, and modified intervention mapping procedures to develop an intervention planning framework in an urban community setting in Leicester, UK. The modified form of intervention mapping (IM) included: systematic evidence synthesis; community study; families and healthcare professionals study; and development of potential collaborative intervention strategies. Participants in the community study were 63 SA community members and 12 key informants; in-depth semi-structured interviews involved 30 SA families, 14 White British (WB) families and 37 Healthcare Professionals (HCPs) treating SA children living with asthma; prioritisation workshops involved 145 SA, 6 WB and 37 HCP participants; 30 participants in finalisation workshops. / Results: Two key principles were utilised throughout the development of the intervention; community-based participatory research (CBPR) principles and intervention mapping (IM) procedures. The CBPR approach allowed close engagement with stakeholders and generated valuable knowledge to inform intervention development. It accounted for diverse perceptions and experiences with regard to asthma and recognised the priorities of patients and their families/caregivers for service improvement. The ‘ACT on Asthma’ programme was devised, comprising four arms of an intervention strategy: education and training, clinical support, advice centre and raising awareness, to be co-ordinated by a central team. / Conclusions: The modified IM principles utilised in this study were systematic and informed by theory. The combined IM and participatory approach could be considered when tailoring interventions for other clinical problems within diverse communities. The IM approach to intervention development was however resource intensive. Working in meaningful collaboration with minority communities requires specific resources and a culturally competent methodology

Genetic Variants of APOL1 Are Major Determinants of Kidney Failure in People of African Ancestry With HIV

INTRODUCTION: Variants of the APOL1 gene are associated with chronic kidney disease (CKD) in people of African ancestry, although evidence for their impact in people with HIV are sparse. METHODS: We conducted a cross-sectional study investigating the association between APOL1 renal risk alleles and kidney disease in people of African ancestry with HIV in the UK. The primary outcome was end-stage kidney disease (ESKD; estimated glomerular filtration rate [eGFR] of 30 mg/mmol), and biopsy-proven HIV-associated nephropathy (HIVAN). Multivariable logistic regression was used to estimate the associations between APOL1 high-risk genotypes (G1/G1, G1/G2, G2/G2) and kidney disease outcomes. RESULTS: A total of 2864 participants (mean age 48.1 [SD 10.3], 57.3% female) were genotyped, of whom, 354 (12.4%) had APOL1 high-risk genotypes, and 99 (3.5%) had ESKD. After adjusting for demographic, HIV, and renal risk factors, individuals with APOL1 high-risk genotypes were at increased odds of ESKD (odds ratio [OR] 10.58, 95% CI 6.22–17.99), renal impairment (OR 5.50, 95% CI 3.81–7.95), albuminuria (OR 3.34, 95% CI 2.00–5.56), and HIVAN (OR 30.16, 95% CI 12.48–72.88). An estimated 49% of ESKD was attributable to APOL1 high-risk genotypes. CONCLUSION: APOL1 high-risk genotypes were strongly associated with kidney disease in people of African ancestry with HIV and accounted for approximately half of ESKD cases in this cohort

Sickle Cell Trait and Kidney Disease in People of African Ancestry With HIV

Introduction: Sickle cell trait (SCT) has been associated with chronic kidney disease (CKD) in African Americans, although evidence for its impact in Africans and people with HIV is currently lacking. We conducted a cross-sectional study investigating the association between SCT and kidney disease in people of African ancestry with HIV in the UK. Methods: The primary outcome was estimated glomerular filtration rate (eGFR) 50 mg/mmol), and albuminuria (albumin-to-creatinine ratio >3 mg/mmol). Multivariable logistic regression was used to estimate the associations between SCT and kidney disease outcomes. Results: A total of 2895 participants (mean age 48.1 [SD 10.3], 57.2% female) were included, of whom 335 (11.6%) had SCT and 352 (12.2%) had eGFR <60 ml/min per 1.73 m2. After adjusting for demographic, HIV, and kidney risk factors including APOL1 high-risk genotype status, individuals with SCT were more likely to have eGFR <60 ml/min per 1.73 m2 (odds ratio 1.62 [95% CI 1.14–2.32]), eGFR <90 ml/min per 1.73 m2 (1.50 [1.14–1.97]), and albuminuria (1.50 [1.09–2.05]). Stratified by APOL1 status, significant associations between SCT and GFR <60 ml/min per 1.73 m2, eGFR <90 ml/min per 1.73 m2, proteinuria, and albuminuria were observed for those with APOL1 low-risk genotypes. Conclusion: Our results extend previously reported associations between SCT and kidney disease to people with HIV. In people of African ancestry with HIV, these associations were largely restricted to those with APOL1 low-risk genotypes

Modelling of the effect of ELMs on fuel retention at the bulk W divertor of JET

Effect of ELMs on fuel retention at the bulk W target of JET ITER-Like Wall was studied with multi-scale calculations. Plasma input parameters were taken from ELMy H-mode plasma experiment. The energetic intra-ELM fuel particles get implanted and create near-surface defects up to depths of few tens of nm, which act as the main fuel trapping sites during ELMs. Clustering of implantation-induced vacancies were found to take place. The incoming flux of inter-ELM plasma particles increases the different filling levels of trapped fuel in defects. The temperature increase of the W target during the pulse increases the fuel detrapping rate. The inter-ELM fuel particle flux refills the partially emptied trapping sites and fills new sites. This leads to a competing effect on the retention and release rates of the implanted particles. At high temperatures the main retention appeared in larger vacancy clusters due to increased clustering rate

The effect of beryllium oxide on retention in JET ITER-like wall tiles

Preliminary results investigating the microstructure, bonding and effect of beryllium oxide formation on retention in the JET ITER-like wall beryllium tiles, are presented. The tiles have been investigated by several techniques: Scanning Electron Microscopy (SEM) equipped with Energy Dispersive X-ray (EDX), Transmission Electron microscopy (TEM) equipped with EDX and Electron Energy Loss Spectroscopy (EELS), Raman Spectroscopy and Thermal Desorption Spectroscopy (TDS). This paper focuses on results from melted materials of the dump plate tiles in JET. From our results and the literature, it is concluded, beryllium can form micron deep oxide islands contrary to the nanometric oxides predicted under vacuum conditions. The deepest oxides analyzed were up to 2-micron thicknesses. The beryllium Deuteroxide (BeOxDy) bond was found with Raman Spectroscopy. Application of EELS confirmed the oxide presence and stoichiometry. Literature suggests these oxides form at temperatures greater than 700 °C where self-diffusion of beryllium ions through the surface oxide layer can occur. Further oxidation is made possible between oxygen plasma impurities and the beryllium ions now present at the wall surface. Under Ultra High Vacuum (UHV) nanometric Beryllium oxide layers are formed and passivate at room temperature. After continual cyclic heating (to the point of melt formation) in the presence of oxygen impurities from the plasma, oxide growth to the levels seen experimentally (approximately two microns) is proposed. This retention mechanism is not considered to contribute dramatically to overall retention in JET, due to low levels of melt formation. However, this mechanism, thought the result of operation environment and melt formation, could be of wider concern to ITER, dependent on wall temperatures

Tritium distributions on W-coated divertor tiles used in the third JET ITER-like wall campaign

Tritium (T) distributions on tungsten (W)-coated plasma-facing tiles used in the third ITER-like wall campaign (2015–2016) of the Joint European Torus (JET) were examined by means of an imaging plate technique and β-ray induced x-ray spectrometry, and they were compared with the distributions after the second (2013–2014) campaign. Strong enrichment of T in beryllium (Be) deposition layers was observed after the second campaign. In contrast, T distributions after the third campaign was more uniform though Be deposition layers were visually recognized. The one of the possible explanations is enhanced desorption of T from Be deposition layers due to higher tile temperatures caused by higher energy input in the third campaign