Chronic nonpigmented Villonodular synovitis in a 13 years old girl: A case report

Nonpigmented villonodular synovitis is a very uncommon and benign proliferative disorder involving the synovium. It is mostly seen in the knee. Here we present a 13-year old girl with a 2 year history of left wrist mass without any pain, tenderness or limitation in range of motion. We believe it is necessary to considere villonodular synovitis in a child with chronic joint effusion as a differential diagnosis

Effect of different mixing methods on the physical properties of Portland cement

The Portland cement is hydrophilic cement; as a result, the powder-to-liquid ratio affects the properties of the final mix. In addition, the mixing technique affects hydration. The aim of this study was to evaluate the effect of different mixing techniques (conventional, amalgamator and ultrasonic) on some selective physical properties of Portland cement. The physical properties to be evaluated were determined using the ISO 6786:2001 specification. One hundred sixty two samples of Portland cement were prepared for three mixing techniques for each physical property (each 6 samples). Data were analyzed using descriptive statistics, one-way ANOVA and post hoc Tukey tests. Statistical significance was set at P<0.05. The mixing technique had no significant effect on the compressive strength, film thickness and flow of Portland cement (P>0.05). Dimensional changes (shrinkage), solubility and pH increased significantly by amalgamator and ultrasonic mixing techniques (P<0.05). The ultrasonic technique significantly decreased working time, and the amalgamator and ultrasonic techniques significantly decreased the setting time (P<0.05). The mixing technique exerted no significant effect on the flow, film thickness and compressive strength of Portland cement samples

The effect of photodynamic therapy and polymer solution containing nano-particles of Ag /ZnO on push-out bond strength of the sealers AH-Plus and MTA Fillapex

The aim of this in vitrostudy was to examine and compare the effect of photodynamic therapy and solution containing nano particles Ag/ZnO on adhesion of endodontic sealers to dentinal walls of human root canal. Ninty single-rooted human teeth were selected and their clinical crown was cut from the cemento-enamel junction zone. Canals were prepared by RaCe rotary system and the smear layer was removed using 17% EDTA and 5.25% NaOCl. Samples were randomly divided into two groups of AH Plus and MTA Fillapex based on the sealer type and each group based on antimicrobial method was divided into two sub-groups of photodynamic therapy and polymer containing nano particles of Ag / ZnO and a control sub-group (N = 15). After obturation of canals with gutta-percha and sealers mentioned, the samples were incubated for a week at a humidity of 95% and 37°C and then 2mm thick discs were prepared from the middle region of roots for Push-out test. The maximum failure force was recorded in newton and converted to MPa. Then, 3 random specimens of each subgroup were evaluated by scanning electron microscopy. Statistical analysis was performed by Two way ANOVA and (P<0.05) was considered significant. The highest (4.84 ± 1.63) and lowest (0.16 ± 0.075) push-out bond strength values were obtained in (AH Plus-PDT) and (MTA Fillapex-Ag/ZnO) respectively. Independent of antimicrobial method, AH Plus bond strength was significantly higher than the MTA Fillapex (p<0.001). For both sealers, PDT increased the bond strength significantly (p<0.001). Photodynamic therapy has a positive effect on the bond strength of AH Plus and MTA Fillapex sealers

An In Vitro Comparison of Coronal Microleakage of Three Orifice Barriers Filling Materials

Introduction: A coronal barrier in root-filled teeth is one of the most effective methods for prevention of coronal microleakage. The aim of this study was to compare coronal microleakage of three materials [light-cured glass-ionomer (GI), mineral trioxide aggregate (MTA), and composite resin] as coronal barriers. Materials and Methods: A total of 188 intact maxillary incisors were used. After instrumentation, all the canals were obturated with gutta-percha and lateral condensation technique using AH26 sealer. Then, the teeth were sectioned just apical to the cemento-enamel junction. The roots were randomly assigned to three experimental groups (n=56) and two negative and positive control groups (n=20). After placing the orifice barrier, the samples were immersed in 2% methylene blue solution for 2 weeks at 37°C. Then the teeth were longitudinally sectioned mesiodistally and dye penetration was measured under a stereomicroscope at ×10 magnification. Data were analyzed with one-way ANOVA and a post-hoc Tukey test. Results: The positive control group leaked significantly more than all the experimental groups (P=0.001). MTA exhibited less leakage than composite and GI (P=0.002) but no significant differences were found between GI and composite groups. Conclusion: Immediate placement of a suitable intra-orifice barrier like MTA, before final restoration, may help minimize recontamination of the remaining apical gutta-percha

Radiographic Evaluation of Root Canal Fillings Accomplished by Undergraduate Dental Students

Introduction: The purpose of this study was to evaluate the radiographic quality of root canal fillings by fourth-, fifth-, and sixth-year undergraduate students at Tabriz Faculty of Dentistry between 2006 and 2012. Methods and Materials: A total of 1183 root canal fillings in 620 teeth were evaluated by two investigators (and in case of disagreement by a third investigator) regarding the presence or absence of under-fillings, over-fillings and perforations. For each tooth, preoperative, working and postoperative radiographs were checked. The Pearson’s chi-square test was used for statistical evaluation of the data. Inter-examiner agreement was measured by Cohen’s kappa (k) values. The level of significance was set at 0.05. Results: Total frequencies of over-filling, under-filling and perforation were 5.6%, 20.4% and 1.9%, respectively. There were significant differences between frequencies of over- and under-fillings (P&lt;0.05). Unacceptable quality, under- and over-fillings were detected in 27.9% of 1183 evaluated canals. Conclusion: The technical quality of root canal therapies performed by undergraduate dental students using step-back preparation and lateral compaction techniques was unacceptable in almost one-fourth of the cases

The Effect of Different Mixing Methods on Working Time, Setting Time, Dimensional Changes and Film Thickness of Mineral Trioxide Aggregate and Calcium-Enriched Mixture

Introduction: The aim of the present study was to evaluate the effect of different mixing techniques (conventional, amalgamator and ultrasonic mixing) on the physical properties the working time (WT), setting time (ST), dimensional changes (DC) and film thickness (FT)] of calcium-enriched mixture (CEM) cement and mineral trioxide aggregate (MTA). Methods and Materials: The mentioned physical properties were determined using the ISO 6786:2001 specification. Six samples of each material were prepared for three mixing techniques (totally 36 samples). Data were analyzed using descriptive statistics, two-way ANOVA and Post Hoc Tukey’s tests. The level of significance was defined at 0.05. Results: Irrespective of mixing technique, there was no significant difference between the WT and FT of the tested materials. Except for the DC of MTA and the FT of the all materials, other properties were significantly affected with mixing techniques (P&lt;0.05). The ultrasonic technique decreased the ST of MTA and CEM cement and increased the WT of CEM cement (P&lt;0.05). Conclusion: The mixing technique of the materials had no significant effect on the dimensional changes of MTA and the film thickness of both materials.Keywords: Calcium-Enriched Mixture; Dimensional Changes; Film Thickness; Mineral Trioxide Aggregate; Setting Time; Working Tim

Postoperative Pain after Endodontic Treatment of Asymptomatic Teeth Using Rotary Instruments: A Randomized Clinical Trial

Introduction: The aim of the present study was to compare the effect of two different rotary instruments on postoperative pain in teeth with asymptomatic irreversible pulpitis. Methods and Materials: A total of 78 mandibular first and second molars were divided into two groups (n=39) and their root canal preparation was carried out with either RaCe or ProTaper rotary instruments. All the subjects underwent one-visit root canal treatment and the severity of postoperative pain was evaluated using visual analog scale (VAS) at 4-, 12-, 24-, 48- and 72-h and 1-week intervals. In addition, the need for taking analgesics was recorded. Data were analyzed with the repeated-measures ANOVA and the Mann-Whitney U test was used for two-by-two comparison. Statistical significance was set at 0.05. Results: Comparison of mean pain severity between the two groups at various postoperative intervals did not reveal any significant differences (P=0.10). The difference in amount of analgesics taken by each groups was not statistically significant (P=0.25). Conclusion: There were no significant differences in the postoperative pain reported between the two groups; which indicates the clinical acceptability of both systems.Keywords: Irreversible Pulpitis; Flare-Up; Postoperative Pain; ProTaper; RaCe; Root Canal Treatment 

Effect of Incorporating Titanium Dioxide Nanoparticles into White Portland Cement, White Mineral Trioxide Aggregate, and Calcium Enriched Mixture Cement on the Push-out Bond Strength to Furcal Area Dentin

Statement of the Problem: Bond strength of furcation repair materials is an essential factor in clinical success. Studies on the effect of adding titanium dioxide (TiO2) nanoparticles on the push-out bond strength of commonly used endodontic cements for furcation perforation repair is limited.Purpose: This study aimed to evaluate the effect of adding TiO2 nanoparticles to white Portland cement (PC), white mineral trioxide aggregate (MTA), and calcium enriched mixture cement (CEM) on their push-out bond strengths.Materials and Method: In this in vitro study, 120 endodontically treated molars were assigned to six groups (n=20) based on the material used to repair the perforation. In three groups, the cements (white PC, white MTA, and CEM) were placed in pure form, and in the three remaining groups, 1 weight % of TiO2 was added. The push-out bond strength was measured using a universal testing machine at a strain rate of 0.5 mm/min. Data were analyzed using one-way ANOVA and post hoc Games-Howell test (p< 0.05).Results: One-way ANOVA showed significant differences in the mean bond strength values between the six groups (p= 0.002). The post hoc Games-Howell test showed that the bond strengths in MTA+TiO2 and PC+TiO2 groups were significantly higher than those in MTA and PC groups, respectively. However, there was no significant difference in the bond strength between CEM and CEM+ TiO2 groups.Conclusion: The incorporation of TiO2 into MTA and PC increased their push-out bond strength. However, it did not affect the push-out bond strength of CEM cement

Comparing the Coronal Seal of Different Thicknesses of MTA with Gutta-Percha after Post Space Preparation

Introduction. The aim of this study was to compare the coronal seal of different thicknesses of MTA with gutta-percha after post space preparation. Materials and Methods. A total of 50 maxillary central incisors randomly divided into 5 experimental groups ( = 8). After preparation of the root canals with step back technique, in groups 1 and 2, post spaces were prepared and 4 or 5 mm gutta-percha remained in the apical, respectively. In groups 3, 4, and 5, there was 1-2 and 3 mm MTA in the apical, respectively. The ten teeth serve as control groups. The teeth were connected to a bacterial microleakage evaluation system. The study period was 120 days and the samples were evaluated on ten-day intervals; Meier-Kaplan technique was used for estimation of the mean time of microleakage to occur. Log-rank test was used for comparison of microleakage. Results. Number of samples exhibiting microleakage in MTA was less than those of gutta-percha at all intervals. Means of days with no microleakage were maximum and minimum with 3 mm MTA and 4 mm gutta-percha, respectively. Conclusion. Obturation of root canals using the MTA technique provides a proper seal with the minimum thickness of MTA in teeth requiring post space preparation