3,152 research outputs found
Priority based technique for rescheduling trains
No AbstractKeywords: rescheduling; mathematical modelling; service disruptions; priorit
Comparison Study On Pinch-Hitting Vibration Signal Analysis for Automotive Bearing: I-KazTM and I-Kaz 3D
Rotating machines are now an essential part of the automotive industry. Meanwhile, a bearing is playing the most important component of rotating machinery. To sustain the system's smooth running, maintenance methods such as preventive maintenance, breakdown maintenance, and predictive maintenance are used. Under preventive maintenance, vibration analysis is used to diagnose machines bearing faults. The main objective is to recognize bearing defects in a mechanical device by acquiring signals from the bearing using data acquisition hardware. This analysis is conducted under various load torque conditions, speeds, and defect types. A modular hardware configuration consisting of an accelerometer acquires the vibration signal. The signals are analyzed by using I-kazTM and I-kaz 3D signal analysis and its main objective is to observe the degree of dispersion data from its mean point. This analysis resolves the issues associated with time domain analysis. This pinch-hitting analysis research was conducted in two stages. The first stage is an experimental process that uses 3 types of bearings, the healthy (BL), inner race fault (IRF), and defect at outer race (ORF) bearing on the Machine Fault Simulator and forces with a different type of speed (1000, 1500 and 2500 rpm) and load variation (0.0564, 0.564 and 1.1298 N-m). In the second stage, computing the coefficient value and plots of signal’s I-kazTM and I-kaz 3D based on the bearings type were done accordingly. As a result, the analysis for detecting inner race fault, the deviation percentage averages calculation obtained the I-kazTM coefficient shows a better result with 96.86% by comparing to the I-kaz 3D that achieves 94.20%. Similarly, for the outer race defect, I-kazTM lead with 65.40% compared to I-kaz 3D with only 54.82%.
 
Comparison Study On Pinch-Hitting Vibration Signal Analysis for Automotive Bearing: I-KazTM and I-Kaz 3D
Rotating machines are now an essential part of the automotive industry. Meanwhile, a bearing is playing the most important component of rotating machinery. To sustain the system's smooth running, maintenance methods such as preventive maintenance, breakdown maintenance, and predictive maintenance are used. Under preventive maintenance, vibration analysis is used to diagnose machines bearing faults. The main objective is to recognize bearing defects in a mechanical device by acquiring signals from the bearing using data acquisition hardware. This analysis is conducted under various load torque conditions, speeds, and defect types. A modular hardware configuration consisting of an accelerometer acquires the vibration signal. The signals are analyzed by using I-kazTM and I-kaz 3D signal analysis and its main objective is to observe the degree of dispersion data from its mean point. This analysis resolves the issues associated with time domain analysis. This pinch-hitting analysis research was conducted in two stages. The first stage is an experimental process that uses 3 types of bearings, the healthy (BL), inner race fault (IRF), and defect at outer race (ORF) bearing on the Machine Fault Simulator and forces with a different type of speed (1000, 1500 and 2500 rpm) and load variation (0.0564, 0.564 and 1.1298 N-m). In the second stage, computing the coefficient value and plots of signal’s I-kazTM and I-kaz 3D based on the bearings type were done accordingly. As a result, the analysis for detecting inner race fault, the deviation percentage averages calculation obtained the I-kazTM coefficient shows a better result with 96.86% by comparing to the I-kaz 3D that achieves 94.20%. Similarly, for the outer race defect, I-kazTM lead with 65.40% compared to I-kaz 3D with only 54.82%.
 
Comparison between measured and computed magnetic flux density distribution of simulated transformer core joints assembled from grain oriented and non-oriented electrical steel
The flux distribution in an overlapped linear joint constructed in the central region of an Epstein Square was
studied experimentally and results compared with those obtained using a computational magnetic field
solver. High permeability grain-oriented (GO) and low permeability non-oriented (NO) electrical steels
were compared at a nominal core flux density of 1.60 T at 50 Hz. It was found that the experimental results
only agreed well at flux densities at which the reluctance of different paths of the flux are similar. Also it
was revealed that the flux becomes more uniform when the working point of the electrical steel is close to
the knee point of the B-H curve of the steel
Challenges to Quit Smoking among Smokers in Bandar Baru Salak Tinggi, Sepang, Selangor, Malaysia
Cigarette smoking is the largest preventable risk factor for morbidity and mortality in developed countries. The prevalence of smoking is increasing in Malaysia. Over the years, we have accumulated the knowledge of the risks and dangers of smoking towards health and had used these as interventions to motivate smokers to quit smoking. However, quitting smoking is hard as people who stop smoking often start again because of weight gain, stress and withdrawal symptoms. Therefore, this study aimed to identify the challenges to quit smoking among smokers in Bandar Baru Salak Tinggi, Sepang, Selangor. A cross-sectional study was conducted with a combination of stratified and simple random sampling. The study was conducted via a face-to-face interview using a standardized questionnaire. The data was analyzed using SPSS (Statistical Package for Social Sciences) Version 20.0. Easy availability of cigarettes was the most challenging factor (86%) followed by seeing things that reminded the respondents of smoking (58%), feeling lost without smoking (53%) and withdrawal symptoms (47%). To combat these challenges, it is imperative to strengthen the enforcement on regulations advertisement and display of cigarettes and develop more activities on motivation among smokers and their families, which may be organized by government or non-government organizations. Other than that, another important aspect in the promoting smoking cessation program is to encourage smoke-free homes
An experimental study of welded bar sleeve wall panel connection under tensile, shear, and flexural loads
This paper presents an experimental study of a new grouted splice connection for wall panels, called Welded Bar Sleeve (WBS). The connections were made from steel pipes and tested with incremental tensile, shear and flexural loads until failure. The aim is to determine the behaviour of the connection under the three load cases. For this, the connections are evaluated in terms of the load–displacement responses, ultimate capacities, ductility responses and some feasibility assessment criteria. WBS was found to provide sufficient strength at the bar embedded length of 8, 8 and 11 times the bar diameter under tensile, shear and flexural loads, respectively. It is effective under tension, but could only service up to 1/3 of its ultimate shear capacity. Flexural load is the most critical load case for the connection. For this, further enhancements are required when subjected to shear and flexural loads
Oscillatory Stability Prediction Using PSO Based Synchronizing and Damping Torque Coefficients
This paper presents the assessment of stability domains for the angle stability condition of the power system using Particle Swarm Optimization (PSO) technique. An efficient optimization method using PSO for synchronizing torque coefficients Ks and damping torque coefficients Kd to identify the angle stability condition on multi-machine system. In order to accelerate the determination of angle stability, PSO is proposed to be implemented in this study. The application of the proposed algorithm has been justified as the most accurate with lower computation time as compared to other optimization techniques such as Evolutionary Programming (EP) and Artificial Immune System (AIS). Validation with respect to eigenvalues determination, Least Square (LS) method and minimum damping ratio Îľmin confirmed that the proposed technique is feasible to solve the angle stability problems
3D Image Plane from Stereo Camera Calibration on Extrinsic Parameters in Stereo Vision Aplication
This paper presents a 3D image plane in a group of target or image during the process of stereo pair calibration. The extrinsic parameters of camera calibration can be viewed in 3D image or scene which contains the rotation and translation of vector. The error re-projection of a single image could determine the less error of distortion during the extraction of chessboard corner each image taken. The distortion model also generates an error coordinate system in pixel value. The 3D image will viewed the result and output of extrinsic parameters during the calibration process.
- …