380 research outputs found
Challenges and opportunities for the utilisation of ionic liquids as solvents for CO2 capture
Ionic Liquids have been extensively investigated as promising materials for several gas separation processes, including CO 2 capture. They have the potential to outperform traditional solvents, in terms of their capacity, selectivity, regenerability and stability. In fact, hundreds of ionic liquids have been investigated as potential sorbents for CO 2 capture. However, most studies focus on enhancing equilibrium capacity, and neglect to consider other properties, such as transport prop- erties, and hence ignore the effect that the overall set of properties have on process performance, and therefore on cost. In this study, we propose a new methodology for their evaluation using a range of monetised and non-monetised process performance indices. Our results demonstrate that whilst most research effort is focused on improving CO 2 solubility, viscosity, a transport prop- erty, and heat capacity, a thermochemical property, might preclude the use of ionic liquids, even those which are highly CO 2 -philic, and therefore increased effort on addressing the challenges associated with heat capacity and viscosity is an urgent necessity. This work highlights a range of potential challenges that ionic liquids will face before they can be applied at process scale, and identifies some key research opportunities
Developments in electrochemical processes for recycling lead-acid batteries
The lead-acid battery recycling industry is very well established, but the conventional pyrometallurgical processes are far from environmentally benign. Hence, recent developments of lead-acid battery recycling technologies have focused on low-temperature (electro-)hydrometallurgical processes, the subject of this review, covering modified electrolytes, improved reaction engineering, better reactor design and control of operating conditions
The Highly Selective and Near-Quantitative Conversion of Glucose to 5-Hydroxymethylfurfural Using Ionic Liquids
A number of ionic liquids have been shown to be excellent solvents for lignocellulosic biomass processing, and some of these are particularly effective in the production of the versatile chemical building block 5-hydroxymethylfurfural (HMF). In this study, the production of HMF from the simple sugar glucose in ionic liquid media is discussed. Several aspects of the selective catalytic formation of HMF from glucose have been elucidated using metal halide salts in two distinct ionic liquids, 1-butyl-3-methylimidazolium chloride and 1-butyl-3-methylimidazolium hydrogen sulfate as well as mixtures of these, revealing key features for accelerating the desired reaction and suppressing byproduct formation. The choice of ionic liquid anion is revealed to be of particular importance, with low HMF yields in the case of hydrogen sulfate-based salts, which are reported to be effective for HMF production from fructose. The most successful system investigated in this study led to almost quantitative conversion of glucose to HMF (90% in only 30 minutes using 7 mol% catalyst loading at 120°C) in a system which is selective for the desired product, has low energy intensity and is environmentally benign
Beyond 90% capture: Possible, but at what cost?
© 2020 Elsevier Ltd Carbon capture and storage (CCS) will have an essential role in meeting our climate change mitigation targets. CCS technologies are technically mature and will likely be deployed to decarbonise power, industry, heat, and removal of CO2 from the atmosphere. The assumption of a 90% CO2 capture rate has become ubiquitous in the literature, which has led to doubt around whether CO2 capture rates above 90% are even feasible. However, in the context of a 1.5 °C target, going beyond 90% capture will be vital, with residual emissions needing to be indirectly captured via carbon dioxide removal (CDR) technologies. Whilst there will be trade-offs between the cost of increased rates of CO2 capture, and the cost of offsets, understanding where this lies is key to minimising the dependence on CDR. This study quantifies the maximum limit of feasible CO2 capture rate for a range of power and industrial sources of CO2, beyond which abatement becomes uneconomical. In no case, was a capture rate of 90% found to be optimal, with capture rates of up to 98% possible at a relatively low marginal cost. Flue gas composition was found to be a key determinant of the cost of capture, with more dilute streams exhibiting a more pronounced minimum. Indirect capture by deploying complementary CDR is also assessed. The results show that current policy initiatives are unlikely to be sufficient to enable the economically viable deployment of CCS in all but a very few niche sectors of the economy
Rapid pretreatment of Miscanthus using the low-cost ionic liquid triethylammonium hydrogen sulfate at elevated temperatures
Deconstruction with low-cost ionic liquids (ionoSolv) is a promising method to pre-condition lignocellulosic biomass for the production of renewable fuels, materials and chemicals. This study investigated process intensification strategies for the ionoSolv pretreatment of Miscanthus X giganteus using the low-cost ionic liquid triethylammonium hydrogen sulfate ([TEA][HSO4]) in the presence of 20 wt% water, using high temperatures and a high solid to solvent loading of 1:5 g/g. The temperatures investigated were 150, 160, 170 and 180°C. We discuss the effect of pretreatment temperature on lignin and hemicellulose removal, cellulose degradation and enzymatic saccharification yields. We report that very good fractionation can be achieved across all investigated temperatures, including an enzymatic saccharification yield exceeding 75% of the theoretical maximum after only 15 min of treatment at 180°C. We further characterised the recovered lignins which established some tunability of the hydroxyl group content, subunit composition, connectivity and molecular weight distribution in the isolated lignin while maintaining maximum saccharification yield. This drastic reduction of pretreatment time at increased biomass loading without a yield penalty is promising for the development of a commercial ionoSolv pretreatment process
Global sensitivity analysis in life-cycle assessment of early-stage technology using detailed process simulation: application to dialkylimidazolium ionic liquid production.
The ability to assess the environmental performance of early-stage technologies at production scale is critical for sustainable process development. This paper presents a systematic methodology for uncertainty quantification in life-cycle assessment (LCA) of such technologies using global sensitivity analysis (GSA) coupled with a detailed process simulator and LCA database. This methodology accounts for uncertainty in both the background and foreground life-cycle inventories, and is enabled by lumping multiple background flows, either downstream or upstream of the foreground processes, in order to reduce the number of factors in the sensitivity analysis. A case study comparing the life-cycle impacts of two dialkylimidazolium ionic liquids is conducted to illustrate the methodology. Failure to account for the foreground process uncertainty alongside the background uncertainty is shown to underestimate the predicted variance of the end-point environmental impacts by a factor of two. Variance-based GSA furthermore reveals that only few foreground and background uncertain parameters contribute significantly to the total variance in the end-point environmental impacts. As well as emphasizing the need to account for foreground uncertainties in LCA of early-stage technologies, these results illustrate how GSA can empower more reliable decision-making in LCA
Pretreatment of Lignocellulosic Biomass with Low-cost Ionic Liquids.
A number of ionic liquids (ILs) with economically attractive production costs have recently received growing interest as media for the delignification of a variety of lignocellulosic feedstocks. Here we demonstrate the use of these low-cost protic ILs in the deconstruction of lignocellulosic biomass (Ionosolv pretreatment), yielding cellulose and a purified lignin. In the most generic process, the protic ionic liquid is synthesized by accurate combination of aqueous acid and amine base. The water content is adjusted subsequently. For the delignification, the biomass is placed into a vessel with IL solution at elevated temperatures to dissolve the lignin and hemicellulose, leaving a cellulose-rich pulp ready for saccharification (hydrolysis to fermentable sugars). The lignin is later precipitated from the IL by the addition of water and recovered as a solid. The removal of the added water regenerates the ionic liquid, which can be reused multiple times. This protocol is useful to investigate the significant potential of protic ILs for use in commercial biomass pretreatment/lignin fractionation for producing biofuels or renewable chemicals and materials
Exploring the effect of water content and anion on the pretreatment of poplar with three 1-Ethyl-3-methylimidazolium ionic liquids
We report on the pretreatment of poplar wood with three different 1-ethyl-3-methylimidazolium ionic liquids, [EMim][OAc], [EMim][MeSO3], and [EMim][HSO4], at varying water contents from 0–40 wt% at 100 °C. The performance was evaluated by observing the lignin and hemicellulose removal, as well as enzymatic saccharification and lignin yield. The mechanism of pretreatment varied between the ionic liquids studied, with the hydrogen sulfate ionic liquid performing delignification and hemicellulose hydrolysis more effectively than the other solvents across the investigated water content range. The acetate ionic liquid produced superior glucose yield at low water contents, while the hydrogen sulfate ionic liquid performed better at higher water contents and produced a recoverable lignin. The methanesulfonate ionic liquid did not introduce significant fractionation or enhancement of saccharification yield under the conditions used. These findings help distinguish the roles of anion hydrogen bonding, solvent acidity, and water content on ionic liquid pretreatment and can aid with anion and water content selections for different applications
- …