76 research outputs found
Recommended from our members
ASSESSING RURAL NORTHERN CALIFORNIA FOSTER PARENT RECRUITMENT STRATEGIES
Purpose: This research proposal aims to better understand the effectiveness of current recruitment of Resource Family Approved (RFA) foster parents in a rural Northern California region. Approximately half of the foster youth at the selected research site were placed out of county due to a lack of available in-county privatized foster homes or RFA foster homes. By assessing the effectiveness of current recruitment rates, researchers identified effective future recruitment efforts. This understanding can lead to an increase in local foster homes and aid increased Family Reunification efforts.
Methods: The study partnered with a rural Northern California Resource Family Approval (RFA) program and utilized a positivist approach. The researcher assessed RFA department data and focused on licensed foster parents and former foster parents. Administrative data was collected and analyzed through thematic analysis.
Implications: The study’s results aimed to explore effective recruitment strategies for rural RFA programs. Analysis of research results highlighted the most ineffective and potentially effective RFA foster parent recruiting strategies at the rural research site. Implications for future social work include adjusting recruitment strategies to result in additional rural foster homes
A Diamond Thin Film Flow Sensor
We present the results of theoretical modeling and experimental testing of a diamond thin film sensor for flow studies. It is shown that the high thermal conductivity of a diamond film can enhance the frequency response of the flow sensor. One-dimensional heat diffusion equation was solved using the finite difference method for determining the frequency response. Two different sensor structures were analyzed: a Ni film on a quartz substrate (Ni/Q) and an intermediate layer of diamond film between the Ni film and quartz substrate (Ni/D/Q). The theoretical model predicts a frequency response for the Ni/D/Q sensor higher than that of the Ni/Q sensor. Diamond films for the Ni/D/Q sensor were deposited onto the quartz substrate by microwave plasma-enhanced chemical vapor deposition (MPECVD). The conditions for a high nucleation density were established for obtaining a continuous diamond thin film. A subsequent nickel film patterned and deposited serves as the sensing arm in the bridge circuit of an anemometer. The measured frequency response of the Ni/D/Q sensor combination is greater than 220 kHz, as compared to the Ni/Quartz sensor response of 120 kHz
Aquilegia, Vol. 34 No. 1, Spring 2010, Newsletter of the Colorado Native Plant Society
https://epublications.regis.edu/aquilegia/1131/thumbnail.jp
Aquilegia, Vol. 33 No. 5, Winter 2009, Newsletter of the Colorado Native Plant Society
https://epublications.regis.edu/aquilegia/1130/thumbnail.jp
Region-based progressive localization of cell nuclei in microscopic images with data adaptive modeling
Myofibre segmentation in H&E stained adult skeletal muscle images using coherence-enhancing diffusion filtering
Rahasia melejitkan daya ingat otak hanya dalam 7 hari
buku ini membongkar kesalahkaprahan pemahaman kita selama ini tentang "daya ingat" (melahirkan orang pintar) versus "daya lupa" (melahirkan orang bodoh), yang cenderung menempatkan kemampuan mengingat (memory power) sebagai faktor genetik, bawaan, sehingga tidak bisa diubah. salah! jangan gadaikan masa depan kesuksesan anda pada pandangan negatif tersebut.iv, 323 hlm, 19,9 x 13,8 c
Preparations for testing a full scale OH-6A rotor system with HHC installed
In the 1970's and 198O's Hughes Helicopters, now McDonnell Douglas Helicopters, in conjunction with the U. S. Army and NASA developed and flight tested the first successful Higher Harmonic Control system for the purpose of reducing helicopter vibration levels. In addition to the reduced vibration levels interesting benefits were also noticed in the areas of acoustic signature and helicopter power requirements. For many years the reduced power requirements could not be explained and therefore were downplayed and not publicized. In the past three years research at the Naval Postgraduate School has been conducted regarding this phenomena and it has been sufficiently explained. The next step in the process is to mount a full scale OH-6A main rotor system on a test stand and conduct testing in order to validate the earlier documented power savings. This thesis documents efforts that have been made in 1994 and 1995 towards accomplishing that goal.http://archive.org/details/preparationsfort1094531444U.S. Marine Corps (U.S.M.C.) author
- …