Permanent Hydrophilic Surface Formation by Ion Assisted Reaction

Since totally wettable hydrophilic polymer surfaces from hydrophobic polymers (PMMA, PTFE, PET and PC) have been demonstrated for the first time at Materials Research Society meeting, 1995 Fall meeting, Boston, the application of ion assisted reaction (IAR), in which energetic ions (0.5~1.5 keV) are irradiated on materials with blowing reactive gases near the irradiating surfaces, has been extended to various polymer, ceramic and metal for creating permanent hydrophilic surfaces. The surface energy was measured by Youngs equation and the highest energy, Es, of 60~70 mN/m, which is similar to surface energy of water (Es of H2O : 72 mN/m) is obtained by controlling ion dose, energy, and amount of blown gas. The higher surface energy of materials possesses the more wettable surface, and relation between wettability and adhesion has been discussed. The remarkable result is the strong adhesion of inert nonattachable material such as Pt on the modified surface. The improvements of adhesions, wettability and surface energy are mainly due to polar force and hydrophilic functional groups such as C=O, (C=O)-O, C-O, etc. on the modified surface without surface damage by surface analyses. Advantages of the method are (1) high reproducibility, (2) simplicity, (3) changing ability of wettability degree, and (4) easy connection to conventional semiconductor process line. Improvements of efficiencies by changing heat transfer coefficients have been presented for the compact heat exchanger system

Influence of Polypyrrole on Phosphorus- and TiO2-Based Anode Nanomaterials for Li-Ion Batteries

Phosphorus (P) and TiO2 have been extensively studied as anode materials for lithium-ion batteries (LIBs) due to their high specific capacities. However, P is limited by low electrical conductivity and significant volume changes during charge and discharge cycles, while TiO2 is hindered by low electrical conductivity and slow Li-ion diffusion. To address these issues, we synthesized organic–inorganic hybrid anode materials of P–polypyrrole (PPy) and TiO2–PPy, through in situ polymerization of pyrrole monomer in the presence of the nanoscale inorganic materials. These hybrid anode materials showed higher cycling stability and capacity compared to pure P and TiO2. The enhancements are attributed to the electrical conductivity and flexibility of PPy polymers, which improve the conductivity of the anode materials and effectively buffer volume changes to sustain structural integrity during the charge and discharge processes. Additionally, PPy can undergo polymerization to form multi-component composites for anode materials. In this study, we successfully synthesized a ternary composite anode material, P–TiO2–PPy, achieving a capacity of up to 1763 mAh/g over 1000 cycles

Could Fractional Exhaled Nitric Oxide Test be Useful in Predicting Inhaled Corticosteroid Responsiveness in Chronic Cough? A Systematic Review

© 2016 Background Fractional exhaled nitric oxide (FENO) is a safe and convenient test for assessing T H 2 airway inflammation, which is potentially useful in the management of patients with chronic cough. Objective To summarize the current evidence on the diagnostic usefulness of FENO for predicting inhaled corticosteroid (ICS) responsiveness in patients with chronic cough. Methods A systematic literature review was conducted to identify articles published in peer-reviewed journals up to February 2015, without language restriction. We included studies that reported the usefulness of FENO (index test) for predicting ICS responsiveness (reference standard) in patients with chronic cough (target condition). The data were extracted to construct a 2 × 2 accuracy table. Study quality was assessed with Quality Assessment of Diagnostic Accuracy Studies 2. Results We identified 5 original studies (2 prospective and 3 retrospective studies). We identified considerable heterogeneities in study design and outcome definitions, and thus were unable to perform a meta-analysis. The proportion of ICS responders ranged from 44% to 59%. Sensitivity and specificity ranged from 53% to 90%, and from 63% to 97%, respectively. The reported area under the curve ranged from abou t 0.60 to 0.87; however, studies with a prospective design and a lower prevalence of asthma had lower area under the curve values. None measured placebo effects or objective cough frequency. Conclusions We did not find strong evidence to support the use of FENO tests for predicting ICS responsiveness in chronic cough. Further studies need to have a randomized, placebo-controlled design, and should use validated measurement tools for cough. Standardization would facilitate the development of clinical evidence

Effect of intradialytic change in blood pressure and ultrafiltration volume on the variation in access flow measured by ultrasound dilution

AbstractBackgroundProspective access flow measurement is the preferred method for vascular access surveillance in hemodialysis (HD) patients. We studied the effect of intradialytic change in blood pressure and ultrafiltration volume on the variation in access flow measured by ultrasound dilution.MethodsAccess flow was measured 30minutes, 120minutes, and 240minutes after the start of HD by ultrasound dilution in 30 patients during 89 HD sessions and evaluated for variation.ResultsThe mean age of the 30 patients was 62±11 years: 19 were male. The accesses comprised 16 fistulae and 14 grafts. The mean access flow over all sessions decreased by 6.1% over time (1265±568mL/min after 30minutes, 1260±599mL/min after 120minutes, and 1197±576mL/min after 240minutes, P<0.01 by repeated measures ANOVA). In addition, a≥5% decrease in mean arterial pressure during HD significantly reduced access flow (P=0.014). However, no other variable (ultrafiltration volume, sex, age, presence of diabetes, type or location of access, body surface area, hemoglobin, serum albumin level) interacted significantly with the effect of time on access flow. Furthermore, mean arterial pressure did not correlate with ultrafiltration volume.ConclusionWe conclude that the variation in access flow during HD is relatively small. Decreased blood pressure is a risk factor for variation in access flow measured by ultrasound dilution. In most patients whose blood pressures are stable during HD, the access flow can be measured at any time during the HD treatment

Loss of Distal Femur Combined with Popliteal Artery Occlusion: Reconstructive Arthroplasty Using Modular Segmental Endoprosthesis: A Case Report

Severe injury to the knee and the surrounding area is frequently associated with injury to ligaments of the knee joint and structures in the popliteal fossa. This case involved a popliteal artery occlusion, severe bone loss of distal femur, loss of collateral ligaments, and extensor mechanism destruction of the knee. Initially, prompt recognition and correction of associated popliteal artery injury are important for good results after treatment. After successful revascularization, treatment for severe bone loss of distal femur and injury of the knee joint must be followed. We treated this case by delayed reconstruction using modular segmental endoprosthesis after revascularization of the popliteal artery. This allowed early ambulation. At 36 months after surgery, the patient had good circulation of the lower limb and was ambulating independently

Crystal structure of Hop2-Mnd1 and mechanistic insights into its role in meiotic recombination

In meiotic DNA recombination, the Hop2−Mnd1 complex promotes Dmc1-mediated single-stranded DNA (ssDNA) invasion into homologous chromosomes to form a synaptic complex by a yet-unclear mechanism. Here, the crystal structure of Hop2−Mnd1 reveals that it forms a curved rod-like structure consisting of three leucine zippers and two kinked junctions. One end of the rod is linked to two juxtaposed winged-helix domains, and the other end is capped by extra α-helices to form a helical bundle-like structure. Deletion analysis shows that the helical bundle-like structure is sufficient for interacting with the Dmc1-ssDNA nucleofilament, and molecular modeling suggests that the curved rod could be accommodated into the helical groove of the nucleofilament. Remarkably, the winged-helix domains are juxtaposed at fixed relative orientation, and their binding to DNA is likely to perturb the base pairing according to molecular simulations. These findings allow us to propose a model explaining how Hop2−Mnd1 juxtaposes Dmc1-bound ssDNA with distorted recipient double-stranded DNA and thus facilitates strand invasio

4-Hydroxy­phenyl 4-fluoro­benzoate

In the title compound, C13H9FO3, the dihedral angle between the two benzene rings is 59.86 (4)°. In the crystal, inter­molecular O—H⋯H hydrogen bonds lead to molecular chains propagating in [010]

N-(3,4-Difluoro­phen­yl)-2-(3,4-dimethoxy­phen­yl)acetamide

In the title amide, C16H15F2NO3, the dihedral angle between the benzene rings is 53.7 (1)°. Mol­ecules are linked in the crystal structure by an inter­molecular N—H⋯O hydrogen bond involving N—H and C=O functionalities of the amide group. A one-dimensional network is thus formed along the [001] direction. No significant inter­chain contacts are observed