Engineering Green-to-Blue Emitting CsPbBr3 Quantum-Dot Films with Efficient Ligand Passivation

A series of challenging issues such as field-driven spectral drift for the CsPbClxBr3–x system and mixed phases in quasi-two-dimensional structures still exist when devising blue-emitting perovskites. In this Letter, the CsPbBr3 quantum-dot (QD) system is proposed to overcome these challenges. However, to date, the CsPbBr3 QD films with tunable colors from green to blue still cannot be achieved using existing methods. Herein, a simple one-step spin-coating route incorporated with efficient ligand passivation is developed to realize this goal. The size restriction of CsPbBr3 QDs is enabled by a diammonium ligand, propane-1,3-diammonium bromide (PDAB). A mixed-ligand system of phenethylammonium bromide (PEAB) with PDAB is further explored to enhance their optical performance. The CsPbBr3 QDs experience a second growth process upon controlled air exposure, which is utilized to realize their size control and emission wavelength tunability. The CsPbBr3 QD-based devices exhibit no spectral drift in electroluminescence under voltage bias

Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation

In recent years, the major factors that determine commercialization of perovskite photovoltaic technology have been shifting from solar cell performance to stability, reproducibility, device upscaling and the prevention of lead (Pb) leakage from the module over the device service life. Here we simulate a realistic scenario in which perovskite modules with different encapsulation methods are mechanically damaged by a hail impact (modified FM 44787 standard) and quantitatively measure the Pb leakage rates under a variety of weather conditions. We demonstrate that the encapsulation method based on an epoxy resin reduces the Pb leakage rate by a factor of 375 compared with the encapsulation method based on a glass cover with an ultraviolet-cured resin at the module edges. The greater Pb leakage reduction of the epoxy resin encapsulation is associated with its optimal self-healing characteristics under the operating conditions and with its increased mechanical strength. These findings strongly suggest that perovskite photovoltaic products can be deployed with minimal Pb leakage if appropriate encapsulation is employed

The Impact of Atmosphere on Energetics of Lead Halide Perovskites

Solar cells based on metal halide perovskites have emerged as a promising low-cost photovoltaic technology. In contrast to inert atmospheres where most of the lab-scale devices are made to date, large-area low-cost production of perovskite solar cells often involves processing of perovskites in various atmospheres including ambient air, nitrogen, and/or vacuum. Herein, the impact of atmosphere on the energy levels of methylammonium lead halide perovskite films is systematically investigated. The atmosphere is varied to simulate the typical fabrication process. Through a comprehensive analysis combining the Fermi level evolution, surface photovoltage, photoluminescence properties, photovoltaic performance, and device simulation, an overall landscape of the energy diagram of the perovskite layer is able to be determined. The findings have direct implications for real-world devices under typical atmospheres, and provide insights into the fabrication-process design and optimization. Furthermore, a universal Fermi level shift under vacuum for lead halide-based perovskites revealed in this study, urges a refreshed view on the energetics studies conducted without considering the atmospheric effect

Negligible‐Pb‐Waste and Upscalable Perovskite Deposition Technology for High‐Operational‐Stability Perovskite Solar Modules

An upscalable perovskite film deposition method combining raster ultrasonic spray coating and chemical vapor deposition is reported. This method overcomes the coating size limitation of the existing stationary spray, single‐pass spray, and spin‐coating methods. In contrast with the spin‐coating method (>90% Pb waste), negligible Pb waste during PbI2 deposition makes this method more environmentally friendly. Outstanding film uniformity across the entire area of 5 cm × 5 cm is confirmed by both large‐area compatible characterization methods (electroluminescence and scattered light imaging) and local characterization methods (atomic force microscopy, scanning electron microscopy, photoluminescence mapping, UV–vis, and X‐ray diffraction measurements on multiple sample locations), resulting in low solar cell performance decrease upon increasing device area. With the FAPb(I0.85Br0.15)3 (FA = formamidinium) perovskite layer deposited by this method, champion solar modules show a power conversion efficiency of 14.7% on an active area of 12.0 cm2 and an outstanding shelf stability (only 3.6% relative power conversion efficiency decay after 3600 h aging). Under continuous operation (1 sun light illumination, maximum power point condition, dry N2 atmosphere with <5% relative humidity, no encapsulation), the devices show high light‐soaking stability corresponding to an average T80 lifetime of 535 h on the small‐area solar cells and 388 h on the solar module

Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface

Perovskite solar cells (PSCs) have attracted great attention in the past few years due to their rapid increase in efficiency and low-cost fabrication. However, instability against thermal stress and humidity is a big issue hindering their commercialization and practical applications. Here, by combining thermally stable formamidinium-cesium-based perovskite and a moisture-resistant carbon electrode, successful fabrication of stable PSCs is reported, which maintain on average 77% of the initial value after being aged for 192 h under conditions of 85 degrees C and 85% relative humidity (the "double 85" aging condition) without encapsulation. However, the mismatch of energy levels at the interface between the perovskite and the carbon electrode limits charge collection and leads to poor device performance. To address this issue, a thin-layer of poly(ethylene oxide) (PEO) is introduced to achieve improved interfacial energy level alignment, which is verified by ultraviolet photoemission spectroscopy measurements. Indeed as a result, power conversion efficiency increases from 12.2% to 14.9% after suitable energy level modification by intentionally introducing a thin layer of PEO at the perovskite/carbon interface

Photon Upconverting Solid Films with Improved Efficiency for Endowing Perovskite Solar Cells with Near‐Infrared Sensitivity

Perovskite solar cells have emerged as the next‐generation high‐efficiency solar cell, but their absorption is mostly limited to the visible (vis) range. One possible solution is to integrate near‐infrared (NIR)‐to‐vis photon upconversion (UC). Herein, we show the first example of endowing perovskite solar cells with NIR sensitivity by using solid films showing NIR‐to‐vis UC based on triplet‐triplet annihilation (TTA). A high TTA‐UC efficiency of 4.1±0.3 % at an excitation intensity of 125 W/cm² is achieved by sensitizing a rubrene (acceptor) triplet with an osmium (Os) complex donor having singlet‐to‐triplet (S−T) absorption in the NIR range, and by increasing the fluorescence quantum yield through energy harvesting to a highly fluorescent collector. In particular, our spectroscopic studies indicate that the upconverted acceptor singlet energy is almost selectively transferred to the collector rather than being quenched by the donor. By attaching the TTA‐UC film behind a semi‐transparent perovskite solar cell, a photocurrent generation is observed under excitation at 938 nm

A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability

The upscaling of perovskite solar cells to module scale and long-term stability have been recognized as the most important challenges for the commercialization of this emerging photovoltaic technology. In a perovskite solar module, each interface within the device contributes to the efficiency and stability of the module. Here, we employed a holistic interface stabilization strategy by modifying all the relevant layers and interfaces, namely the perovskite layer, charge transporting layers and device encapsulation, to improve the efficiency and stability of perovskite solar modules. The treatments were selected for their compatibility with low-temperature scalable processing and the module scribing steps. Our unencapsulated perovskite solar modules achieved a reverse-scan efficiency of 16.6% for a designated area of 22.4 cm². The encapsulated perovskite solar modules, which show efficiencies similar to the unencapsulated one, retained approximately 86% of the initial performance after continuous operation for 2,000 h under AM1.5G light illumination, which translates into a T₉₀ lifetime (the time over which the device efficiency reduces to 90% of its initial value) of 1,570 h and an estimated T80 lifetime (the time over which the device efficiency reduces to 80% of its initial value) of 2,680 h

Genome-Wide Association Studies Reveal the Genetic Basis of Ionomic Variation in Rice

Rice (Oryza sativa) is an important dietary source of both essential micronutrients and toxic trace elements for humans. The genetic basis underlying the variations in the mineral composition, the ionome, in rice remains largely unknown. Here, we describe a comprehensive study of the genetic architecture of the variation in the rice ionome performed using genome-wide association studies (GWAS) of the concentrations of 17 mineral elements in rice grain from a diverse panel of 529 accessions, each genotyped at ∼6.4 million single nucleotide polymorphism loci. We identified 72 loci associated with natural ionomic variations, 32 that are common across locations and 40 that are common within a single location. We identified candidate genes for 42 loci and provide evidence for the causal nature of three genes, the sodium transporter gene Os-HKT1;5 for sodium, Os-MOLYBDATE TRANSPORTER1;1 for molybdenum, and Grain number, plant height, and heading date7 for nitrogen. Comparison of GWAS data from rice versus Arabidopsis (Arabidopsis thaliana) also identified well-known as well as new candidates with potential for further characterization. Our study provides crucial insights into the genetic basis of ionomic variations in rice and serves as an important foundation for further studies on the genetic and molecular mechanisms controlling the rice ionome

Robust estimation of bacterial cell count from optical density

Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals &lt;1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data