2,996 research outputs found
Improved prediction of laminar leading edge separation
Research was conducted to provide a definite criterion for the prediction of the bubble burst on airfoils typical of those used for fighter wings. The approach taken was to correlate existing airfoil bubble burst data using various parameters at the laminar separation point. The method due to Weber was modified to provide a continuous analytic solution for the velocity distribution around the airfoil leading edge. Coupling the modified Weber method with the Stratford laminar separation prediction method leads to a universal chart giving the conditions at separation as a function of stagnation location and leading edge radius. Application of the combined method to available two-dimensional airfoil data resulted in an empirical criterion presenting the limiting local velocity gradient at separation as a function of the boundary layer momentum thickness at separation for bubble burst. The correlation leads as well to the qualitative explanation of two types of laminar stall: thin airfoil and leading edge. The validity of the correlation is demonstrated by predicting the lift coefficient and angle of attack for stall on airfoils with leading edge or trailing edge flaps
Materials processing in space: Early experiments
The characteristics of the space environment were reviewed. Potential applications of space processing are discussed and include metallurgical processing, and processing of semiconductor materials. The behavior of fluid in low gravity is described. The evolution of apparatus for materials processing in space was reviewed
High resolution electron microscopy study of a high Cu variant of Weldalite (tm) 049 and a high strength Al-Cu-Ag-Mg-Zr alloy
Weldalite (trademark) 049 is an Al-Cu-Li-Ag-Mg alloy that is strengthened in artificially aged tempers primarily by very thin plate-like precipitates lying on the set of (111) matrix planes. This precipitate might be expected to be the T(sub 1) phase, Al2CuLi, which has been observed in Al-Cu-Li alloys. However, in several ways this precipitate is similar to the omega phase which also appears as the set of (111) planes plates and is found in Al-Cu-Ag-Mg alloys. The study was undertaken to identify the set of (111) planes precipitate or precipitates in Weldalite (trademark) 049 in the T8 (stretched and artificially aged) temper, and to determine whether T(sub 1), omega, or some other phase is primarily responsible for the high strength (i.e., 700 MPa tensile strength) in this Al-Cu-Li-Ag-Mg alloy
Compressive behavior of titanium alloy skin-stiffener specimens selectively reinforced with boron-aluminum composite
A method of selectively reinforcing a conventional titanium airframe structure with unidirectional boron-aluminum composite attached by brazing was successfully demonstrated in compression tests of short skin-stiffener specimens. In a comparison with all-titanium specimens, improvements in structural performance recorded for the composite-reinforced specimens exceeded 25 percent on an equivalent-weight basis over the range from room temperature to 700 K (800 F) in terms of both initial buckling and maximum strengths. Performance at room temperature was not affected by prior exposure at 588 K (600 F) for 1000 hours in air or by 400 thermal cycles between 219 K and 588 K (-65 F and 600 F). The experimental results were generally predictable from existing analytical procedures. No evidence of failure was observed in the braze between the boron-aluminum composite and the titanium alloy
Research on boron filaments and boron reinforced composites
Boron filaments for use as reinforcing phase in composite materials for aerospace structure
Buffet test in the National Transonic Facility
A buffet test of a commercial transport model was accomplished in the National Transonic Facility at the NASA Langley Research Center. This aeroelastic test was unprecedented for this wind tunnel and posed a high risk for the facility. Presented here are the test results from a structural dynamics and aeroelastic response point of view. The activities required for the safety analysis and risk assessment are described. The test was conducted in the same manner as a flutter test and employed on-board dynamic instrumentation, real time dynamic data monitoring, and automatic and manual tunnel interlock systems for protecting the model
Design of linear and nonlinear control systems via state variable feedback, with applications in nuclear reactor control
Linear and nonlinear control systems via state variable feedback with applications in nuclear reactor contro
In-Store Evaluation of Consumer Willingness to Pay for “Farm-Raised†Pre-Cooked Roast Beef: A Case Study
A choice-based conjoint experiment was used to examine consumer willingness to pay for a farm-raised pre-cooked roast beef product. Consumers were contacted in a grocery store and provided a sample of the pre-cooked product. Findings indicate there is a small, but statistically significant willingness-to-pay premium for the farm-raised product, suggesting that some product differentiation may result in higher prices for these products. The study outlines an approach to marketing research.beef, conjoint, convenience foods, experiments, in-store tests, surveys, Livestock Production/Industries, Marketing,
An exact study of charge-spin separation, pairing fluctuations and pseudogaps in four-site Hubbard clusters
An exact study of charge-spin separation, pairing fluctuations and pseudogaps
is carried out by combining the analytical eigenvalues of the four-site Hubbard
clusters with the grand canonical and canonical ensemble approaches in a
multidimensional parameter space of temperature (T), magnetic field (h),
on-site interaction (U) and chemical potential. Our results, near the average
number of electrons =3, strongly suggest the existence of a critical
parameter U_{c}(T) for the localization of electrons and a particle-hole
binding (positive) gap at U>U_{c}(T), with a zero temperature quantum critical
point, U_{c}(0)=4.584. For U<U_{c}(T), particle-particle pair binding is found
with a (positive) pairing gap. The ground state degeneracy is lifted at
U>U_c(T) and the cluster becomes a Mott-Hubbard like insulator due to the
presence of energy gaps at all (allowed) integer numbers of electrons. In
contrast, for U< U_c(T), we find an electron pair binding instability at finite
temperature near =3, which manifests a possible pairing mechanism, a
precursor to superconductivity in small clusters.
In addition, the resulting phase diagram consisting of charge and spin
pseudogaps, antiferromagnetic correlations, hole pairing with competing
hole-rich (=2), hole-poor (=4) and magnetic (=3) regions in the
ensemble of clusters near 1/8 filling closely resembles the phase diagrams and
inhomogeneous phase separation recently found in the family of doped high T_c
cuprates.Comment: 10 pages, 7 figure
- …